niusouti.com

What is the appliance port used to connect to in a Cisco Unified Computing System？（）A、 Fibre Channel storageB、 UCS C-Series serversC、 NFS storageD、 UCS chassisE、 Other fabric interconnect

题目

What is the appliance port used to connect to in a Cisco Unified Computing System？（）

  • A、 Fibre Channel storage
  • B、 UCS C-Series servers
  • C、 NFS storage
  • D、 UCS chassis
  • E、 Other fabric interconnect
相似考题

1.A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）A.OSPFB.RIPC.FSPFD.VSANs

2.What is the use of NPV in Cisco Unified Computing Systems？ （）    A、 Compatibility with third-party Fibre Channel switchesB、 Faster throughputC、 Reduce domain IDs in a Fibre Channel environmentD、 Support for increased number of VSANsE、 Support for SAN port channels

3.A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A、 OSPFB、 RIPC、 FSPFD、 VSANs

4.In a Cisco Unified Computing System， where are SAN port channels connected to？（）A、 Only to Cisco Fibre Channel switchesB、 Only to Cisco Fibre Channel switches in NPIV modeC、 To any Fibre Channel switchD、 Directly to storage arraysE、 Only to Nexus Switches

更多“What is the appliance port used to connect to in a Cisco Unified Computing System？（）A、 Fibre Channel storageB、 UCS C-Series serversC、 NFS storageD、 UCS chassisE、 Other fabric interconnect”相关问题

  • 第1题：

    Which protocol does the UCS Fabric Interconnect support on port channel uplinks?（）

    • A、LACP
    • B、PAgP
    • C、MCPC

    正确答案:A

  • 第2题：

    What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）

    • A、 An interface ’san-port-channel’ in NXOS
    • B、 An interface ’port-channel’ in NXOS
    • C、 An interface ’port-channel’ with ’mode fc’ configured
    • D、 An interface ’fc-port-channel’ in NXOS

    正确答案:A

  • 第3题：

    A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）

    • A、 Uplink Ethernet ports or border ports
    • B、 Appliance ports
    • C、 Server ports
    • D、 Fabric ports
    • E、 Backplane ports
    • F、 vEth interfaces
    • G、 A Fabric Interconnect doesn’t learn MAC addresses in End Host mode. Pinning is used instead.

    正确答案:B,C,E,F

  • 第4题：

    Which statement about Cisco Unified Fabric switches is correct？ （）   

    • A、 The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
    • B、 The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. 
    • C、 The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
    • D、 The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
    • E、 The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

    正确答案:E

  • 第5题：

    Where are SAN Port Channel is created in UCS Manager？（）

    • A、 Under the Admin tab on the FI
    • B、 Under the Server tab in the service profile
    • C、 Under the SAN tab on each VSAN
    • D、 Under the Admin tab on the chassis
    • E、 Under the SAN tab on the Fabric Interconnect

    正确答案:E

  • 第6题：

    When will an "all configuration" backup be imported into the Cisco UCS Manager？（）

    • A、 During the initial configuration from the console
    • B、 Once the basic configuration has been applied
    • C、 To restore the configuration on a secondary fabric interconnect
    • D、 To upgrade the firmware on a replacement fabric interconnect

    正确答案:B

  • 第7题：

    多选题
    A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）
    A

    Uplink Ethernet ports or border ports

    B

    Appliance ports

    C

    Server ports

    D

    Fabric ports

    E

    Backplane ports

    F

    vEth interfaces

    G

    A Fabric Interconnect doesn’t learn MAC addresses in End Host mode. Pinning is used instead.


    正确答案： A,F
    解析： 暂无解析

  • 第8题：

    单选题
    In a Cisco Unified Computing System， where are SAN port channels connected to？（）
    A

     Only to Cisco Fibre Channel switches

    B

     Only to Cisco Fibre Channel switches in NPIV mode

    C

     To any Fibre Channel switch

    D

     Directly to storage arrays

    E

     Only to Nexus Switches


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
    A

     An interface ’san-port-channel’ in NXOS

    B

     An interface ’port-channel’ in NXOS

    C

     An interface ’port-channel’ with ’mode fc’ configured

    D

     An interface ’fc-port-channel’ in NXOS


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Which protocol does the UCS Fabric Interconnect support on port channel uplinks?（）
    A

    LACP

    B

    PAgP

    C

    MCPC


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    What is the appliance port used to connect to in a Cisco Unified Computing System？（）
    A

     Fibre Channel storage

    B

     UCS C-Series servers

    C

     NFS storage

    D

     UCS chassis

    E

     Other fabric interconnect


    正确答案： E
    解析： 暂无解析

  • 第12题：

    单选题
    Which statement ab0ut VLANs in a Cisco UCS is true?（）
    A

    Fabric interconnect can never participate in VTP

    B

    Fabric interconnect supports ISL and 802.1Q trunking

    C

    The supported range of VLANs is auto-configured by UCS

    D

    VLANs are configured through the Cisco UCS manager. （fabric interconnect may be set up in switch mode）


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which statement ab0ut VLANs in a Cisco UCS is true?（）

    • A、Fabric interconnect can never participate in VTP
    • B、Fabric interconnect supports ISL and 802.1Q trunking
    • C、The supported range of VLANs is auto-configured by UCS
    • D、VLANs are configured through the Cisco UCS manager. （fabric interconnect may be set up in switch mode）

    正确答案:D

  • 第14题：

    What is the use of an "all configuration" backup in Cisco UCS？（）

    • A、 Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
    • B、 Can only be used on the fabric interconnect on which it was created
    • C、 Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information
    • D、 Can be used to match firmware versions between 6120 and 6140 during a migration

    正确答案:A

  • 第15题：

    Which statements are true regarding the Cisco UCS fabric failover feature？ （）

    • A、 FabricSync is used to synchronize MAC addresses to an adjacent fabric interconnect after a server interface failover.
    • B、 Gratuitous ARPs are sent on fabric interconnect uplinks after a server interface failover. 
    • C、 Fabric failover can be used on vNICs and vHBAs.
    • D、 Fabric failover is configured as part of the service profile.
    • E、 Fabric interconnects in end-host mode use fabric failover instead of spanning tree to provide redundancy on uplink ports.

    正确答案:A,B,D

  • 第16题：

    Which two statements about QoS options in a Cisco UCS environment are true？（）

    • A、 The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.
    • B、 Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and receive IEEE 802.3x pause frames when the send buffer for a port fills.
    • C、 If no system class is configured as CoS 0， the Fibre Channel system class is used.
    • D、 The user can configure QoS for these system classes： platinum， gold， silver， best effort， Fibre Channel.
    • E、 When configuring a system class， the type of adapter in a server may limit the maximum MTU supported.

    正确答案:A,E

  • 第17题：

    Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）

    • A、 The fabric interconnects must be in end-host mode.
    • B、 A pin group must be configured on the server tab in Cisco UCS Manager.
    • C、 In the service profile for Server 1， vNIC 1 must be explicitly assigned to a pin group.
    • D、 Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.
    • E、 Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned， but not both.

    正确答案:A,C

  • 第18题：

    What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）

    • A、 Cisco UCS Manager 1.3（xx） or later and a pair of Nexus 2248 FEXes
    • B、 Cisco UCS Manager 2.0（2xx） or later and a pair of Nexus 2232 FEXes
    • C、 Two Cisco UCS 6100 Series or 6200 Series fabric interconnects
    • D、 Two RJ45 Ethernet cables
    • E、 The fabric interconnects must be in end-host mode

    正确答案:B,C,D

  • 第19题：

    单选题
    Where are SAN Port Channel is created in UCS Manager？（）
    A

     Under the Admin tab on the FI

    B

     Under the Server tab in the service profile

    C

     Under the SAN tab on each VSAN

    D

     Under the Admin tab on the chassis

    E

     Under the SAN tab on the Fabric Interconnect


    正确答案： E
    解析： 暂无解析

  • 第20题：

    单选题
    What is the use of an "all configuration" backup in Cisco UCS？（）
    A

     Can be used to migrate from a 6120 to a 6140 and retain the same service profiles

    B

     Can only be used on the fabric interconnect on which it was created

    C

     Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information

    D

     Can be used to match firmware versions between 6120 and 6140 during a migration


    正确答案： D
    解析： 暂无解析

  • 第21题：

    多选题
    Which statements are true regarding the Cisco UCS fabric failover feature？ （）
    A

    FabricSync is used to synchronize MAC addresses to an adjacent fabric interconnect after a server interface failover.

    B

    Gratuitous ARPs are sent on fabric interconnect uplinks after a server interface failover.

    C

    Fabric failover can be used on vNICs and vHBAs.

    D

    Fabric failover is configured as part of the service profile.

    E

    Fabric interconnects in end-host mode use fabric failover instead of spanning tree to provide redundancy on uplink ports.


    正确答案： B,C
    解析： 暂无解析

  • 第22题：

    多选题
    What is the use of NPV in Cisco Unified Computing Systems？ （）
    A

    Compatibility with third-party Fibre Channel switches

    B

    Faster throughput

    C

    Reduce domain IDs in a Fibre Channel environment

    D

    Support for increased number of VSANs

    E

    Support for SAN port channels


    正确答案： E,B
    解析： 暂无解析

  • 第23题：

    多选题
    What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
    A

    Cisco UCS Manager 1.3（xx） or later and a pair of Nexus 2248 FEXes

    B

    Cisco UCS Manager 2.0（2xx） or later and a pair of Nexus 2232 FEXes

    C

    Two Cisco UCS 6100 Series or 6200 Series fabric interconnects

    D

    Two RJ45 Ethernet cables

    E

    The fabric interconnects must be in end-host mode


    正确答案： E,B
    解析： 暂无解析

相关内容