如果要把交换机Trunk的许可VLAN列表改为默认的许可所有VLAN的状态,应该使用命令()
第1题:
A. All defined VLANs are allowed on the trunk by default.
B. Each VLAN, or VLAN range, that is specified with the switchport mode command.
C. Each VLAN, or VLAN range, that is specified with the vtp domain command.
D. Each VLAN, or VLAN range, that is specified with the vlan database command.
第2题:
A. It designates VLAN 999 for untagged traffic.
B. It blocks VLAN 999 traffic from passing on the trunk.
C. It creates a VLAN 999 interface.
D. It designates VLAN 999 as the default for all unkown tagged traffic.
第3题:
A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.
第4题:
Which configuration option will cause the link between two Cisco 3600 Series Multiservice Platforms to become a functional trunk?()
第5题:
锐捷交换机VLAN修剪命令格式是下列哪条命令?()
第6题:
命令设置该端口为VLAN的干道的命令是()
第7题:
What is the function of the command switchport trunk native vlan 999 on a?()
第8题:
交换机如何将接口设置为TAG VLAN模式?()
第9题:
把VLAN20从中继链路中删除的命令是()
第10题:
Which command alone will disable trunking on a Layer 2 switch port?()
第11题:
Switch-3548(config-if)#switchport trunk encapsulation dotlq
Switch-3548(config-if)#switchport trunk allowed vlan 1,10,20,30
Switch-3548(config-if)#switchport mode trunk
Switch-3548(config-if)#switchport trunk encapsulation isl
Switch-3548(config-if)#switchport tnmk allowed vlan 1-30
Switch-3548(config-if)#switchport mode trunk
Switch-3548(config-if)#switchport trunk encapsulation negotiate
Switch-3548(config-if)#switchport trunk allowed vlan 1-30
Switch-3548(config-if)#switchport mode trunk
Switch-3548(config-if)#switchport trunk encapsulation dotlq
Switch-3548(config-if)#switchport trunk allowed vlan 1,10,20,30
第12题:
switchport dynamic auto switchport dynamic auto
switchport access vlan 10 switchport mode dynamic desireable
switchport mode trunk switchport nonegotiate
Leave both ports with the default trunk settings
第13题:
A. All defined VLANs are allowed on the trunk by default.
B. Each VLAN, or VLAN range, that is specified with the switchport mode command.
C. Each VLAN, or VLAN range, that is specified with the vtp domain command.
D. Each VLAN, or VLAN range, that is specified with the vlan database command.
第14题:
A.By default, all defined VLANs are allowed on the trunk.
B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.
C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.
D.Each single VLAN, or VLAN range, must be specified with the vlan database command.
第15题:
A.创建vlan20的接口
B.指定vlan20的流量不能被打标记
C.阻止vlan20的流量在干道通过
D.所有未打标记的流量都默认指定为vlan20
第16题:
在配置交换机Trunk接口的VLAN许可列表时,是用all选项的含义是()
第17题:
设置Trunk口许可所有VALN通过的命令是()
第18题:
在思科交换机上使用switchport trunk native vlan 20命令的含义是什么()。
第19题:
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()
第20题:
在交换机的配置中,能够正确地将NativeVLAN设置为VLAN5的命令是()。
第21题:
A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv. Interface fastethernet 1/10 Switchport mode trunk Switchport trunk allowed vlan all Channel-group 10 mode on No shut Interface fastethernet 1/11 Switchport mode trunk Switchport trunk allowed vlan all Channel-group 10 mode on No shut Interface port-channel 10 Switchport mode trunk Switchport allowed vlan all No shut Which Port Channel configuration must be used on the Nexus 1000v port-profile?()
第22题:
It designates VLAN 999 for untagged traffic.
It blocks VLAN 999 traffic from passing on the trunk.
It creates a VLAN 999 interface.
It designates VLAN 999 as the default for all unkown tagged traffic.
第23题:
It creates a VLAN 999 interface.
It designates VLAN 999 for untagged traffic.
It blocks VLAN 999 traffic from passing on the trunk.
It designates VLAN 999 as the default for all unknown tagged traffic.