关闭RIP路由汇总的命令是?()
第1题:
A.noauto-summary
B.auto-summary
C.noiprouter
D.iprouter
第2题:
对路由器A配置RIP协议,并在接口S0(IP地址为172.16.0.1/24)所在网段使能RIP路由协议,在配置模式下使用的第一条命令是(59)。
A.router rip
B.ip routing
C.rip 10.0.0.0
D.network 172.16.0.0
第3题:
Refer to the exhibit. Two routers are connected by Frame Relay and are running OSPF bet ween them. Each router has been configured with the appropriate network statements under router ospf 1, but the routers are not forming an adjacency. Which of the following three commands could be configured on each router to correct this problem?()
A. RouterC(config - if)#ip ospf network broadcast RouterD(config - if)#ip ospf network broadcast
B. RouterC(config - if)#ip ospf network point - to - point RouterD(config - if)#ip ospf network point - to - point
C. RouterC(config - router)#neighbor 10.100. 100.4 RouterD(config - router)#neighbor 10.100.100.3
D. RouterC(config - router)#neighbor 10.255.255.254 RouterD(config - router)#neighbor 10.255.255.253
第4题:
下面哪条命令用于在路由器上添加一条默认路由?
A.Router#ip route 0.0.0.0 0.0.0.0 192.168.100.1
B.Router#ip route 0.0.0.0 255.255.255.255 192.168.100.1
C.Router(Config)# ip route 0.0.0.0 0.0.0.0 192.168.100.1
D.Router(Config)# ip route 0.0.0.0 255.255.255.255 192.168.100.1
第5题:
以下配置默认路由的命令正确的是______。
A.ip route 0.0.0.0.0.0.0.0 172.16.10.1
B.ip router 0.0.0.0.0.0.0.0 172.16.10.1
C.ip router 0.0.0.0.0.0.0.0 172.16.10.10
D.ip route 0.0.0.0.255.255.255.255 172.16.10.1
第6题:
配置静态路由的命令是()
第7题:
如果要对RIP进行调试排错,应该使用哪一个命令?()
第8题:
禁用自动汇总的命令是()
第9题:
对路由器A配置RIP协议,并在接口S0(IP地址为10.0.0.1/24)所在网段使能RIP路由协议,在全局配置模式下使用的第一条命令是:()
第10题:
no auto-summary
auto-summary
no ip router
ip router
第11题:
noauto-summary
auto-summary
no ip router
ip router
第12题:
show ip route
show ip router
show route
show router
第13题:
Qutidway路由器上输入“show ip rip“命令,如下所示: Qutidway#show ip rip RIP is rurining on Checkcero is on defauit-metric 16 On neighter Fictucrik all BUTO-surttutiry is on preference 100 下列说法正确的是:( )
A、 该条命令显示了RIP当前运行状态和配置信息
B、 默认情况下,RIP路由协议优先级为100,可能通过“IP RIP PRICRITY”命令修改其优先级
C、 这条命令显示路由器所有接口用了RIP协议,最大可达统计数为1G
D、 ON NEIGHBOR显示这台路由器没有作为任何其它路由器的邻居
第14题:
以下配置默认路由的命令正确的是:()。
A.ip route 0.0.0.0 0.0.0.0 172.16.2.1
B.ip route 0.0.0.0 255.255.255.255 172.16.2.1
C.ip router 0.0.0.0 0.0.0.0 172.16.2.1
D.ip router 0.0.0.0 0.0.0.0 172.16.2.1
第15题:
Cisco路由器查看路由表信息的命令是______。
A.show route
B.show router
C.show ip route
D.show ip router
第16题:
下列选项中,配置默认路由的命令正确的是( )。
A.ip router 0.0.0.0.0.0.0.0 172.16.10.1
B.ip router 0.0.0.0.0.0.0.0 172.16.10.10
C.ip route 0.0.0.0.0.0.0.0 172.16.10.1
D.ip route 0.0.0.0.255.255.255.255 172.16.10.1
第17题:
在路由配置命令中,去除RIP协议的命令是()
第18题:
关闭Rip路由汇总的命令是?()
第19题:
下面哪条命令用于在路由器上添加一条默认路由?()
第20题:
MSR路由器上取消RIP协议自动路由聚合的命令是()。
第21题:
下面哪条命令用于校验路由发送的路由信息?()
第22题:
Router(config-router)#debug ip rip
Router#show ip rip event
Router(config-router)#show ip interface
Router#debug ip rip
第23题:
Router(config-router)#show route ip
Router(config)#show ip rip
Router#show ip rip route
Router#show ip route