niusouti.com

单选题When doing capacity planning for the Virtual I/O Server,what is the most important  consideration?()A The I/O workload needs of the client LPARsB The processing requirements of the client LPARsC The memory requirements of the client LPARsD The virtual 

题目
单选题
When doing capacity planning for the Virtual I/O Server,what is the most important  consideration?()
A

The I/O workload needs of the client LPARs

B

The processing requirements of the client LPARs

C

The memory requirements of the client LPARs

D

The virtual Ethernet requirements between client LPARs


相似考题
更多“单选题When doing capacity planning for the Virtual I/O Server,what is the most important  consideration?()A The I/O workload needs of the client LPARsB The processing requirements of the client LPARsC The memory requirements of the client LPARsD The virtual ”相关问题
  • 第1题:

    A technical specialist has installed a Host Bus Adapter (HBA) on a p5-550 server. The system has four AIX 5L V5.3 partitions and a Virtual I/O server. The HBA will be used to connect all four partitions to a DS8000 storage array. What else must be performed to make the storage available to the partitions?()

    • A、Allocate the HBA to a client partition.
    • B、Restart the Virtual I/O Server to detect the changes.
    • C、Install the device driver for the DS8000 in each of the four AIX partitions.
    • D、Allocate the HBA to the VIO server partition and install necessary drivers.

    正确答案:D

  • 第2题:

    在一个典型的PPPoE组网中,PPPoE Server和PPPoE Client均为MSR路由器,如果希望PPPoE工作在永久在线模式,需要进行以下哪些配置()。

    • A、PPPoE Server上配置:[RTA-virtual-Templatel] pppoe-client dial-bundle-number 1
    • B、PPPoE Client上配置:[HG-Dialerl]pppoe-client dial-bundle-numberl
    • C、PPPoE Client上配置:[HG-Ethernet0/0]pppoe-client dial-bundle-number 1
    • D、PPPoE Server上配置:[RTA-Virtual-Templatel]pppoe-client dial-bundle-numberlidle-timeout65535
    • E、PPPoE Server上配置:[RTA-EthernetO/O]pppoe-client dial-bundle-number 1
    • F、PPPoE Client上配置:[HG-Dialerl]pppoe-client dial-bundle-numberlidle-timeout O

    正确答案:C

  • 第3题:

    Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?()

    • A、Have one VIO server with striped disks for all LPARs
    • B、Have one VIO server with mirrored disks for all LPARs
    • C、Have two VIO servers with each LPAR accessing both VIO servers
    • D、Have two VIO servers with each LPAR accessing a different VIO server

    正确答案:C

  • 第4题:

    You are using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to perform a  virtual-to-virtual (V2V) conversion. You need to place the virtual machine (VM) on the host server that has the most available disk I/O. Which two actions should you perform?()

    • A、Set the placement goal to Load balancing.
    • B、Set the placement goal to Resource maximization.
    • C、Set the resource importance of the disk I/O to Very Important.
    • D、Set the maximum disk I/O per second for the host reserves to 10000.

    正确答案:A,C

  • 第5题:

    Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App (OWA).  In Site2, you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements: .Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joinedcomputers that are connected to the internal network  What should you do?()

    • A、Modify the Exchange virtual directory on the Client Access server in Site1.
    • B、Modify the Exchange virtual directory on the Client Access server in Site2.
    • C、Modify the OWA virtual directory on the Client Access server in Site1.
    • D、Modify the OWA virtual directory on the Client Access server in Site2.

    正确答案:D

  • 第6题:

    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?()

    • A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 
    • B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 
    • C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 
    • D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

    正确答案:A

  • 第7题:

    单选题
    Your company has an Active Directory Domain Services (AD DS) domain. All server s run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED - V) to support client virtualization requirements. You need to ensure that all MED - V virtual machine (VM) images can be centrally stor ed and are available to all client computers. What should you do?()
    A

    Install and configure IIS on a member server.

    B

    Configure a shared folder on a member server.

    C

    Create a single workspace for all client computers.

    D

    Install and configure Microsoft SQL Se rver 2008 on a member server.


    正确答案: B
    解析: 暂无解析

  • 第8题:

    单选题
    What type of configuration can provide the best availability in a Virtual IO Server environment?()
    A

    Provide multiple paths to all resources through 2 or more Virtual IO Servers

    B

    Mirror all disk resources on the Virtual IO Server to present to the client LPAR

    C

    Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server

    D

    Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter (SEA)


    正确答案: D
    解析: 暂无解析

  • 第9题:

    单选题
    Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements. You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available to all client computers. What should you do?()
    A

    Install and configure IIS on a member server.

    B

    Configure a shared folder on a member server.

    C

    Create a single workspace for all client computers.

    D

    Install and configure Microsoft SQL Server 2008 on a member server.


    正确答案: A
    解析: 暂无解析

  • 第10题:

    单选题
    What is the minimum number of virtual I/O server partitions needed to ensure high availability of the disks when utilizing the Virtual I/O server in a micro-partitioned solution?()
    A

    1

    B

    2

    C

    3

    D

    4


    正确答案: A
    解析: 暂无解析

  • 第11题:

    单选题
    Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App (OWA).  In Site2, you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements: .Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joined computers that are connected to the internal network  What should you do?()
    A

    Modify the Exchange virtual directory on the Client Access server in Site1.

    B

    Modify the Exchange virtual directory on the Client Access server in Site2.

    C

    Modify the OWA virtual directory on the Client Access server in Site1.

    D

    Modify the OWA virtual directory on the Client Access server in Site2.


    正确答案: C
    解析: 暂无解析

  • 第12题:

    单选题
    Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?()
    A

    Create two virtual adapters on the client, each one from a separate Virtual IO Server

    B

    Enable dead gateway detection on the client so that the network traffic can be rerouted

    C

    Have a spare network card on standby in the client in case the Virtual IO Server goes down

    D

    Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two  separate Virtual IO Servers


    正确答案: A
    解析: 暂无解析

  • 第13题:

    What is the minimum number of virtual I/O server partitions needed to ensure high availability of the disks when utilizing the Virtual I/O server in a micro-partitioned solution?()

    • A、1
    • B、2
    • C、3
    • D、4

    正确答案:B

  • 第14题:

    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?()

    • A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.
    • B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.
    • C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.
    • D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

    正确答案:D

  • 第15题:

    What type of configuration can provide the best availability in a Virtual IO Server environment?()

    • A、Provide multiple paths to all resources through 2 or more Virtual IO Servers
    • B、Mirror all disk resources on the Virtual IO Server to present to the client LPAR
    • C、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
    • D、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter (SEA)

    正确答案:A

  • 第16题:

    Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements. You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available to all client computers. What should you do?()

    • A、Install and configure IIS on a member server.
    • B、Configure a shared folder on a member server.
    • C、Create a single workspace for all client computers.
    • D、Install and configure Microsoft SQL Server 2008 on a member server.

    正确答案:A

  • 第17题:

    Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App (OWA).  In Site2, you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements: .Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joined computers that are connected to the internal network  What should you do?()

    • A、Modify the Exchange virtual directory on the Client Access server in Site1.
    • B、Modify the Exchange virtual directory on the Client Access server in Site2.
    • C、Modify the OWA virtual directory on the Client Access server in Site1.
    • D、Modify the OWA virtual directory on the Client Access server in Site2.

    正确答案:D

  • 第18题:

    单选题
    A technical specialist has installed a Host Bus Adapter (HBA) on a p5-550 server. The system has four AIX 5L V5.3 partitions and a Virtual I/O server. The HBA will be used to connect all four partitions to a DS8000 storage array. What else must be performed to make the storage available to the partitions?()
    A

    Allocate the HBA to a client partition.

    B

    Restart the Virtual I/O Server to detect the changes.

    C

    Install the device driver for the DS8000 in each of the four AIX partitions.

    D

    Allocate the HBA to the VIO server partition and install necessary drivers.


    正确答案: A
    解析: 暂无解析

  • 第19题:

    单选题
    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?()
    A

    Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.

    B

    Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.

    C

    Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.

    D

    Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.


    正确答案: B
    解析: 暂无解析

  • 第20题:

    单选题
    Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App (OWA).  In Site2, you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements:.Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joinedcomputers that are connected to the internal network  What should you do?()
    A

    Modify the Exchange virtual directory on the Client Access server in Site1.

    B

    Modify the Exchange virtual directory on the Client Access server in Site2.

    C

    Modify the OWA virtual directory on the Client Access server in Site1.

    D

    Modify the OWA virtual directory on the Client Access server in Site2.


    正确答案: A
    解析: 暂无解析

  • 第21题:

    单选题
    Company.com has an EMC disk array and would like to connect it to a Virtual I/O Server on a pSeries p5-520.  How can the EMC device drivers be installed?()
    A

    Use smitty install on the client partitions.

    B

    Use padmin command in the VIO Server.

    C

    Use the oem_setup_env environment in the VIO Server.

    D

    Use cfgmgr to detect/configure the devices within the client AIX partition.


    正确答案: C
    解析: 暂无解析

  • 第22题:

    单选题
    A technical specialist has a requirement to implement a 4-way POWER5 server with a small Web server partition and a high performance database server partition. The Web server provides a client front-end to the database server. The most important concerns are speed of communication between the Web server and the database and I/O speed of the database. Which of the following virtualization features would be most appropriate?()
    A

    Virtual SCSI

    B

    Virtual Ethernet

    C

    Virtual I/O Server

    D

    Micro-Partitioning


    正确答案: C
    解析: 暂无解析

  • 第23题:

    单选题
    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?()
    A

    The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 

    B

    The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 

    C

    The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 

    D

    The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.


    正确答案: A
    解析: 暂无解析

  • 第24题:

    单选题
    When doing capacity planning for the Virtual I/O Server,what is the most important  consideration?()
    A

    The I/O workload needs of the client LPARs

    B

    The processing requirements of the client LPARs

    C

    The memory requirements of the client LPARs

    D

    The virtual Ethernet requirements between client LPARs


    正确答案: A
    解析: 暂无解析