Boot in maintenance and use fsck to check hd5.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode, access the rootvg and use the bootlist command to create a valid boot list.
第1题:
An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?()
第2题:
A system was running properly until a reboot. Following the reboot, the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next?()
第3题:
During system boot, the boot process hangs at LED 0551. Which of the following is a likely cause()
第4题:
During reboot the system hangs with an LED 0554 message that means, "The boot device could not be opened or a read failed." What recovery procedures should be taken?()
第5题:
During reboot the system hangs with LED 0581 that indicates "Configuring TCP/IP." Which recovery procedures should be taken?()
第6题:
Check system console connections
Check system network connections
Boot in service mode and change the bootlist
Boot from the AIX installation media and mount rootvg filesystems
第7题:
Boot in maintenance and use fsck to check hd5.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode, access the rootvg and use the bootlist command to create a valid boot list.
第8题:
Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.
Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.
Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.
Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.
第9题:
Missing blv
Network problem
Wrong boot table
Corrupted file system
第10题:
varyon of the paging device failed.
fsck of the root (/) filesystem failed.
varyon of the root volume group failed.
IPL device could not be opened or a read failed.
第11题:
A network problem
corrupted filesystem
corrupted ODM
corrupted /etc/inittab file
第12题:
Reboot the system in normal mode.
Use the bosboot command to rebuild the boot image.
Restore the boot logical volume from a mksysb image.
Reboot the system into maintenance mode and run fsck on the boot logical volume.
第13题:
A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?()
第14题:
An LPAR has hung during a reboot, reporting a 0552 LED code. What does this signify?()
第15题:
A user reports a corrupted boot logical volume. In order to recreate the contents of the boot logical volume which of the following procedures should the user be advised to perform?()
第16题:
During reboot, the system hangs with an LED 0554 message that means, "The boot device could not be opened or a read failed." Which of the following recovery procedures should be taken ()
第17题:
Reinstall the CDE software
Check the name resolution
Uncomment the last line in .dtprofile
Boot in maintenance mode and perform fsck on file systems
第18题:
Boot in maintenance mode and use fsck to check hd5.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode, and reset the root password.
第19题:
Boot in maintenance mode, and verify the Ethernet adapter configuration.
Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
Boot in maintenance mode after verifying the network connection, access the rootvg and check the /etc/rc.net file.
第20题:
Boot from the IBM Disaster Recovery boot server thru the network.
Installation media or diagnostics media is required to acquire the rootvg.
Boot to maintenance mode, enter a limited function shell, and execute getrootfs hdisk0.
Hold space bar at boot time to automatically initiate a limited function shell, then enter getrootfs hdisk0.
第21题:
varyon of the paging device failed.
fsck of the root (/) filesystem failed.
varyon of the root volume group failed.
IPL device could not be opened or a read failed.
第22题:
Reset the root password
Press the space bar
Type recovery
Press the Enter key
第23题:
Power down then power up the system
Boot into diagnostic mode and run fsck
Boot from installation media and run bosboot
Boot into maintenance mode and check the bootlist
第24题:
All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.
There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.
The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.
The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.