The wrong cable type has been used.
. IDS has shut down the computer's switch port.
The port on the switch is configured incorrectly
Spanning tree protocol was implemented.
第1题:
A user has no network connectivity. A check of the associated port indicates that the interface is up, the line protocol is down. Which item would most likely cause this problem?()
第2题:
A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?()
第3题:
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on, the drive LED remains lit and an error message during power-on self test (POST) states, ’No Drive Present.’ Which of the following would MOST likely be the cause?()
第4题:
A user states that they cannot access a network shared drive. The technician has verified that the clients network cable is good. The IP address of the machine is 169.254.10.15. Which of the following is the cause of the problem?()
第5题:
An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?()
第6题:
The power supply has failed.
The drive cable is connected backwards.
The floppy drive has failed.
The proper drivers have not been loaded.
第7题:
The wrong cable type has been used.
. IDS has shut down the computer's switch port.
The port on the switch is configured incorrectly
Spanning tree protocol was implemented.
第8题:
The wireless access point is using MAC address filtering
The user has connected to a nearby wireless access point from another office
The user has configured the wireless settings with the wrong encryption type
The wireless access point has SSID broadcast disabled
第9题:
The new computer is printing to the wrong IP address.
The new computer is using the wrong protocol.
The driver port is not setup correctly.
The option has not been selected on the driver.
第10题:
UTP
Fiber
RG-6
STP
第11题:
Battery needs to be replaced
Light switch is turned off
Smart cable is disconnected
UPS needs a firmware update
第12题:
The WINS server is not resolving names properly.
The DNS server is not resolving names.
The DHCP server is out of IP address leases.
The hosts file is corrupted.
第13题:
A user on a network cannot access any network resources. The link light on the computer showsthat a connection is present. Which of the following is the MOST likely cause of the problem?()
第14题:
A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?()
第15题:
A customer has installed a new computer on their network. They can print to the printer but the option for duplex printing is not available. All other computers have the option. Which of the following is the cause of the problem?()
第16题:
A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?()
第17题:
The motherboard was damaged and needs replacing.
The floppy drive was not reconnected.
A configuration disk was left in the floppy drive.
The ribbon cable has been installed incorrectly.
第18题:
The second hard drive has not been formatted for NTFS.
The jumpers on both drives are set to the cable select position.
The jumper on the first drive is set to master and the second is set to slave.
The jumpers on both drives are set to the master position.
第19题:
Speed mismatch
Incorrect encapsulation
MTU set too low
Duplex mismatch
第20题:
The device is located behind a firewall.
The network card is disabled.
The device is not configured for DHCP.
The device cannot locate a DHCP server.
第21题:
Invalid IP address
FTP program is not working
Port 21 is blocked
The FTP site is down
第22题:
Incorrect DNS
Incorrect subnet mask
Duplicate IP address
Incorrect SSID
第23题:
Frayed or broken cables
UPS is unplugged
NIC and sound card are disabled in Device Manager
Speakers are muted
第24题:
Network data cables are damaged.
Memory has become unseated.
The user has defragmented the hard drive.
Processor cooling fan is not functioning.