niusouti.com

多选题A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）APull the CMOS battery.BPull the 20/24 pin connector from the main board.CShort the reset circuit near the 

题目
多选题
A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）
A

Pull the CMOS battery.

B

Pull the 20/24 pin connector from the main board.

C

Short the reset circuit near the RAM.

D

Use the appropriate jumper on main board.

E

Use the reset button on the front panel.

相似考题

1.A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).A. Set the clear password jumper on the motherboardB. Enter the BIOS setup and select the clear password settingC. Remove the power cord from the power supply and then plug it back inD. Power cycle the PCE. Remove the CMOS battery for 15 minutes

2.When a user’s computer is first turned on, they see a lock symbol and a blinking cursor. Which of the following was configured in the BIOS to show this?()A. Intrusion detectionB. Power on passwordC. Drive encryptionD. BIOS password

3.Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?()A. 6-pin PCI connectorB. 24-pin connectorC. Molex connectorD. SATA connector

4.A user has forgotten their BIOS password on their computer. Which of the following would atechnician use to allow the user access to their PC?()A. Remove the BIOS chip on the PCB. Re-flash the BIOSC. Run password cracking software on the users PCD. Set the password clear jumper on the motherboard

更多“多选题A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）APull the CMOS battery.BPull the 20/24 pin connector from the main board.CShort the reset circuit near the ”相关问题

  • 第1题：

    A technician would like to load an operating system CD on startup. Which of the following settings would a technician change in the BIOS?()

    A. Enable TPM

    B. Enable BIOS password

    C. Disable TPM

    D. Boot sequence


    参考答案：D

  • 第2题：

    A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).

    • A、Set the clear password jumper on the motherboard
    • B、Enter the BIOS setup and select the clear password setting
    • C、Remove the power cord from the power supply and then plug it back in
    • D、Power cycle the PC
    • E、Remove the CMOS battery for 15 minutes

    正确答案:A,E

  • 第3题：

    A technician would like to load an operating system CD on startup. Which of the following settings would a technician change in the BIOS?（）

    • A、Enable TPM
    • B、Enable BIOS password
    • C、Disable TPM
    • D、Boot sequence

    正确答案:D

  • 第4题：

    Which of the following will reset the BIOS settings?（） (Select TWO).

    • A、Unplug the CMOS battery.
    • B、Unplug the power supply.
    • C、Switch on the reset jumper.
    • D、Replace the RAM.
    • E、Unplug the CPU.

    正确答案:A,C

  • 第5题：

    A technician is locked out of a desktops BIOS because of a forgotten password. Which of the following is a method of removing the password？（）

    • A、Replace the power supply unit.
    • B、Reseat the systems memory.
    • C、Reset the proper jumper.
    • D、Re-install the operating system.

    正确答案:C

  • 第6题：

    Which of the following will corrupt the BIOS?（）

    • A、Applying the BIOS settings in the incorrect order
    • B、Power being lost during the upgrade process
    • C、Installing the OS before applying the BIOS upgrade
    • D、Imaging the system after performing a BIOS upgrade

    正确答案:B

  • 第7题：

    A user has forgotten their BIOS password on their computer. Which of the following would atechnician use to allow the user access to their PC?（）

    • A、Remove the BIOS chip on the PC
    • B、Re-flash the BIOS
    • C、Run password cracking software on the users PC
    • D、Set the password clear jumper on the motherboard

    正确答案:D

  • 第8题：

    A technician arrives in Germany and discovers that when their PC is plugged into the outlet, nopower is received. Which of the following actions should the technician take to get the PC tooperate?（）

    • A、Change the BIOS settings to the local time
    • B、Adjust the voltage selector switch
    • C、Attach a 220 volt power strip from the current region to the PC
    • D、Attach a 120 volt battery backup power supply to the PC

    正确答案:B

  • 第9题：

    单选题
    Which of the following will corrupt the BIOS？（）
    A

     Applying the BIOS settings in the incorrect order

    B

     Power being lost during the upgrade process

    C

     Installing the OS before applying the BIOS upgrade

    D

     Imaging the system after performing a BIOS upgrade


    正确答案： A
    解析： 暂无解析

  • 第10题：

    多选题
    Which TWO of the following are required to use the hot-swap memory feature of the x445 while being operating system independent？（）
    A

    Memory Mirroring must be enabled in the BIOS.

    B

    Redundant bit steering must be enabled in the BIOS.

    C

    DIMMs must be the same size and speed as the DIMMs being replaced.

    D

    Memory Mirroring must be enabled in the operating system.

    E

    DIMMs can be of same size or larger or same speed or faster.


    正确答案： E,A
    解析： 暂无解析

  • 第11题：

    多选题
    A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）
    A

    Pull the CMOS battery.

    B

    Pull the 20/24 pin connector from the main board.

    C

    Short the reset circuit near the RAM.

    D

    Use the appropriate jumper on main board.

    E

    Use the reset button on the front panel.


    正确答案： C,D
    解析： 暂无解析

  • 第12题：

    多选题
    Which of the following will reset the BIOS settings?（） (Select TWO).
    A

    Unplug the CMOS battery.

    B

    Unplug the power supply.

    C

    Switch on the reset jumper.

    D

    Replace the RAM.

    E

    Unplug the CPU.


    正确答案： D,C
    解析： 暂无解析

  • 第13题：

    A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）

    • A、Pull the CMOS battery.
    • B、Pull the 20/24 pin connector from the main board.
    • C、Short the reset circuit near the RAM.
    • D、Use the appropriate jumper on main board.
    • E、Use the reset button on the front panel.

    正确答案:A,D

  • 第14题：

    A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）

    • A、Replace the video card with a compatible one.
    • B、Check the Windows XP Hardware Compatibility List.
    • C、Verify the boot order in the BIOS.
    • D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.

    正确答案:C

  • 第15题：

    When a user’s computer is first turned on, they see a lock symbol and a blinking cursor. Which of the following was configured in the BIOS to show this?（）

    • A、Intrusion detection
    • B、Power on password
    • C、Drive encryption
    • D、BIOS password

    正确答案:B

  • 第16题：

    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

    • A、 backup the BIOS configuration to use later
    • B、 install the BIOS update from a command prompt
    • C、 create a bootable floppy and copy the BIOS update tools to the floppy
    • D、 read the manufacturer’s guidelines and recommendations on installing the update

    正确答案:D

  • 第17题：

    In which of the following locations would a technician set the LBA mode for a hard drive？（）

    • A、Jumper Settings
    • B、Disk Manager
    • C、Device Manager
    • D、System BIOS

    正确答案:D

  • 第18题：

    Which of the following connectors uses the main board ATX connector type?（）

    • A、Centronix
    • B、20/24 pin
    • C、BNC
    • D、Molex

    正确答案:B

  • 第19题：

    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?（）

    • A、6-pin PCI connector
    • B、24-pin connector
    • C、Molex connector
    • D、SATA connector

    正确答案:B

  • 第20题：

    A technician is preparing to update the BIOS on a laptop. Which of the following should thetechnician do to prevent problems during the update?（）

    • A、Remove all of the memory
    • B、Plug in the AC adapter
    • C、Remove the hard drive and optical drive
    • D、Clear the partitions on the hard drive

    正确答案:B

  • 第21题：

    单选题
    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）
    A

     backup the BIOS configuration to use later

    B

     install the BIOS update from a command prompt

    C

     create a bootable floppy and copy the BIOS update tools to the floppy

    D

     read the manufacturer’s guidelines and recommendations on installing the update


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A technician is locked out of a desktops BIOS because of a forgotten password. Which of the following is a method of removing the password？（）
    A

    Replace the power supply unit.

    B

    Reseat the systems memory.

    C

    Reset the proper jumper.

    D

    Re-install the operating system.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).
    A

    Set the clear password jumper on the motherboard

    B

    Enter the BIOS setup and select the clear password setting

    C

    Remove the power cord from the power supply and then plug it back in

    D

    Power cycle the PC

    E

    Remove the CMOS battery for 15 minutes


    正确答案： B,A
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?（）
    A

    6-pin PCI connector

    B

    24-pin connector

    C

    Molex connector

    D

    SATA connector


    正确答案： D
    解析： 暂无解析

相关内容