niusouti.com

单选题How can you control which local IP address the ERX uses when communicating with a RADIUS server?（）A radius update-source-addressB radius calling-station-formatC radius accounting server 10.13.7.55D radius authentication server 10.13.7.55

题目
单选题
How can you control which local IP address the ERX uses when communicating with a RADIUS server?（）
A

radius update-source-address

B

radius calling-station-format

C

radius accounting server 10.13.7.55

D

radius authentication server 10.13.7.55

相似考题

1.How many usable IP addresses can you get from a conventional Class C address?A．128B．192C．254D．256E．510

2.Which three components can be leveraged when defining a local whitelist or blacklist for antispam on a branch SRX Series device? (Choose three.)()A. spam assassin filtering scoreB. sender countryC. sender IP addressD. sender domainE. sender e-mail address

3.How can you control which local IP address the ERX uses when communicating with a RADIUS server?()A. radius update-source-addressB. radius calling-station-formatC. radius accounting server 10.13.7.55D. radius authentication server 10.13.7.55

4.Which of the followings can be used to ask for a favor of somebody()?A.Are you going to see John when you are in Beijing?B.When will you go to Chongqing?C.Will you please give him the parcel when you see him?D.How muchlong will you wait at the station?

更多“How can you control which local IP address the ERX uses when”相关问题

  • 第1题：

    You are trying to recover from a corrupted flash.Which configuration command configures an IP address of 192.168.1.1／24 on the SRP management interface when the ERX1400 router is at the boot prompt?()

    A.A

    B.B

    C.C

    D.D


    参考答案：C

  • 第2题：

    When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?()

    A.show ip access-list

    B.show access-list

    C.list ip interface

    D.show interface

    E.show ip interface


    参考答案：E

  • 第3题：

    Which three components can be leveraged when defining a local whitelist or blacklist for antispam on a branch SRX Series device? (Choose three.)（）

    • A、spam assassin filtering score
    • B、sender country
    • C、sender IP address
    • D、sender domain
    • E、sender e-mail address

    正确答案:C,D,E

  • 第4题：

    You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）

    • A、It burns IP addresses.
    • B、It conserves IP addresses.
    • C、Both the client and the ERX Edge Router have IP addresses.
    • D、The client has an IP address， but the ERX Edge Router uses an unnumbered address.

    正确答案:A,C

  • 第5题：

    Which two range descriptions correctly describe IP addressing to use when enabling multicast support using the Cisco Unified Wireless Solution?（）

    • A、globally scoped address range
    • B、239.0.0.X or 239.128.0.X address range
    • C、administratively scoped address range that does not overlap with a link-local MAC address
    • D、any Class D address range
    • E、site-local scoped address range

    正确答案:C,E

  • 第6题：

    A NAS differs from a SAN because NAS：（）

    • A、 is attached to a local disk controller.
    • B、 does support multipath I/O.
    • C、 never uses an IP address for network connectivity.
    • D、 always uses an IP address to access data.

    正确答案:D

  • 第7题：

    Which command is used to display a address pool for a DHCP Local Server?（）

    • A、show ip local pool
    • B、show ip dhcp local pool
    • C、show ip dhcp-local pool
    • D、show ip pool

    正确答案:C

  • 第8题：

    Which two statements are true about the primary address on an interface?（）

    • A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface
    • B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface
    • C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface
    • D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface

    正确答案:A,C

  • 第9题：

    多选题
    Which three components can be leveraged when defining a local whitelist or blacklist for antispam on a branch SRX Series device? (Choose three.)（）
    A

    spam assassin filtering score

    B

    sender country

    C

    sender IP address

    D

    sender domain

    E

    sender e-mail address


    正确答案： E,A
    解析： 暂无解析

  • 第10题：

    多选题
    You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）
    A

    It burns IP addresses.

    B

    It conserves IP addresses.

    C

    Both the client and the ERX Edge Router have IP addresses.

    D

    The client has an IP address， but the ERX Edge Router uses an unnumbered address.


    正确答案： A,D
    解析： 暂无解析

  • 第11题：

    单选题
    When configuring Frame Relay using point-to-point subinterfaces, which of the following must not be configured?（）
    A

    The local DLCI on each subinterface of the Frame Relay.

    B

    The Frame Relay encapsulation on the physical interface.

    C

    An IP address on the physical interface.

    D

    The subinterface type as point-to-point


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    Which two statements are true about the primary address on an interface? （）
    A

    It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface

    B

    You use the primary address when you have multiple IP addresses belonging to the same subnet on the same inteface

    C

    It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface

    D

    By default, the primary address on an interface is selected as the nmerically highest local address configured on the interface


    正确答案： B,C
    解析： 暂无解析

  • 第13题：

    You‘re working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.How will you do this?（）

    A.

    B.

    C.

    D.

    E.


    参考答案：A

  • 第14题：

    How can you control which local IP address the ERX uses when communicating with a RADIUS server?（）

    • A、radius update-source-address
    • B、radius calling-station-format
    • C、radius accounting server 10.13.7.55
    • D、radius authentication server 10.13.7.55

    正确答案:A

  • 第15题：

    A user in your company has a laptop， which he uses both， on and off the network. You want to change the users profile to roaming but when you attempt to change the setting， the Roaming profile option is grayed out. How can you change the laptop users profile to roaming？（）

    • A、In Control Panel， System， User Profiles Tab， change profile to roaming.
    • B、Have him log back into the network.
    • C、Change the Profile to a Mandatory User Profile.
    • D、Change the profile to a Mandatory Roaming Profile.

    正确答案:B

  • 第16题：

    How to create the control port in separated mode 端口的control口IP address是10.10.0.80,voice 口 IP address 10.0.0.81,子网掩码255.255.255.0


    正确答案:Create ip if en.1.1.1 10.10.0.80 255.255.255.0 control

  • 第17题：

    When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）

    • A、show ip access-list
    • B、show access-list
    • C、list ip interface
    • D、show interface
    • E、show ip interface

    正确答案:E

  • 第18题：

    Which two statements are true about the primary address on an interface?（）

    • A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.
    • B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.
    • C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.
    • D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.

    正确答案:A,C

  • 第19题：

    When configuring resource access policies in a Junos Pulse Access Control Service device, which entry is permitted when defining the specific resources?（）

    • A、Hostname
    • B、fully qualified domain name
    • C、IP address
    • D、address book entry

    正确答案:C

  • 第20题：

    单选题
    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）
    A

    Use a static IPv4 address in the range used at the branch office.

    B

    Use an alternate configureation that contains a static IP address in the range used at the main office

    C

    Use the address that was assigned by DHCP as a static IP address

    D

    Use an alternate configuration that contains a static Ip address in the range used at the branch office.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?（）
    A

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP as the IP address the instance.

    B

    Configure multiple Junos Pulse Access Control Service instances on the enforcer, specifying the specific IP address each device in a separate instance.

    C

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and active node address in the instance.

    D

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and passive node address in the instance.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.  You need to ensure that the portable computers can connect to network resources at the main office and the branch office.How should you configure each portable computer（）？
    A

    Use a static IPv4 address in the range used at the branch office.

    B

    Use an alternate configuration that contains a static IP address in the range used at the main office.

    C

    Use the address that was assigned by the DHCP server as a static IP address.

    D

    Use an alternate configuration that contains a static IP address in the range used at the branch office.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）
    A

    show ip access-list

    B

    show access-list

    C

    list ip interface

    D

    show interface

    E

    show ip interface


    正确答案： B
    解析： 暂无解析

  • 第24题：

    多选题
    Which two statements are true about the primary address on an interface?（）
    A

    It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.

    B

    You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.

    C

    It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.

    D

    By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.


    正确答案： A,C
    解析： 暂无解析

相关内容