niusouti.com

单选题A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte

题目
单选题
A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）
A

bos.rte is corrupted and needs to be reinstalled.

B

The system administration needs to reboot the system.

C

The /root part of bos.rte was installed but not the user part. Reinstall the missing software.

D

The update CD needs to be applied with the smitty update_all command.

相似考题

1.A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -vbos.rte V =4 R is >4 bos.rte V>5bos.rte not installed. 5.1.0lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）A.bos.rte is corrupted and needs to be reinstalled.B.The system administration needs to reboot the system.C.The /root part of bos.rte was installed but not the user part. Reinstall the missing software.D.The update CD needs to be applied with the smitty update_all command.

2.The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.

3. A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）A、bos.rte is corrupted and needs to be reinstalled.B、The system administration needs to reboot the system.C、The /root part of bos.rte was installed but not the user part. Reinstall the missing software.D、The update CD needs to be applied with the smitty update_all command.

4.An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available.Which media should the administrator use?（）A.AnyAIXbootablemedia，providingitisa64-bitvariantB.AnyAIXbootablemedia，providingitisAIX5.1orlaterC.AnyAIX5.3bootablemedia，providingitisTL09orlaterD.AnyAIX6.1bootablemedia，providingitisTL02orlater

更多“单选题A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is 4 bos.rte V5 bos.rte no”相关问题

  • 第1题：

    A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）

    • A、Use base media to restore system to AIX 5.1.
    • B、Use an alt_disk_install and boot back to the AIX 5.1 rootvg.
    • C、Make a mksysb of the original AIX to restore back to the AIX 5.1 level.
    • D、Perform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.

    正确答案:B

  • 第2题：

    A production system needs to be upgraded from AIX V5.2 to AIX V5.3. All system logs and users need to be saved.  Which installation method will accomplish the upgrade（）

    • A、Update Installation
    • B、Migration Installation
    • C、Preservation Installation
    • D、Mirror rootvg prior to a Preservation Installation

    正确答案:B

  • 第3题：

    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available.  Which media should the administrator use？（）

    • A、Any AIX bootable media， providing it is a 64-bit variant
    • B、Any AIX bootable media， providing it is AIX 5.1 or later
    • C、Any AIX 5.3 bootable media， providing it is TL09 or later
    • D、Any AIX 6.1 bootable media， providing it is TL02 or later

    正确答案:C

  • 第4题：

    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）

    • A、AnyAIXbootablemedia，providingitisa64-bitvariant
    • B、AnyAIXbootablemedia，providingitisAIX5.1orlater
    • C、AnyAIX5.3bootablemedia，providingitisTL09orlater
    • D、AnyAIX6.1bootablemedia，providingitisTL02orlater

    正确答案:C

  • 第5题：

    When trying to run topas on an AIX 4.3.x system， the system administrator gets the error message "ksh： topas：  not found."   Which of the following options is the most likely reason this occurred？（）

    • A、 The fileset bos.perf.tools is not loaded on this system.
    • B、 The fileset perfagent.tools is not loaded on this system.
    • C、 The command topas is only available in AIX version 5.x.
    • D、 The path variable does not include /usr/samples/kernel/. Either add it to the .profile or cd to that location and run the command again.

    正确答案:B

  • 第6题：

    单选题
    A System p administrator needs to upgrade a system from AIX 5.2 to AIX 5.3.  Which of the following installation methods would minimize downtime（）
    A

    Migration installation

    B

    Partition Mobility

    C

    alt_disk_install

    D

    update_all smit fastpath and reboot during the next scheduled outage


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）
    A

    /usr/bin/errmsg System upgraded to AIX 5.2

    B

    /usr/bin/errlog System upgraded to AIX 5.2

    C

    /usr/bin/errupdate System upgraded to AIX 5.2

    D

    /usr/bin/errlogger System upgraded to AIX 5.2


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server.  Which of the following commands is required to complete the activation？（）
    A

    telinit -q

    B

    startsrc -s bootpd

    C

    refresh -s inetd


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A production system needs to be upgraded from AIX V5.2 to AIX V5.3. All system logs and users need to be saved.  Which installation method will accomplish the upgrade（）
    A

    Update Installation

    B

    Migration Installation

    C

    Preservation Installation

    D

    Mirror rootvg prior to a Preservation Installation


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）
    A

    AnyAIXbootablemedia，providingitisa64-bitvariant

    B

    AnyAIXbootablemedia，providingitisAIX5.1orlater

    C

    AnyAIX5.3bootablemedia，providingitisTL09orlater

    D

    AnyAIX6.1bootablemedia，providingitisTL02orlater


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）
    A

    Use base media to restore system to AIX 5.1.

    B

    Use an alt_disk_install and boot back to the AIX 5.1 rootvg.

    C

    Make a mksysb of the original AIX to restore back to the AIX 5.1 level.

    D

    Perform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available.  Which media should the administrator use？（）
    A

    Any AIX bootable media， providing it is a 64-bit variant

    B

    Any AIX bootable media， providing it is AIX 5.1 or later

    C

    Any AIX 5.3 bootable media， providing it is TL09 or later

    D

    Any AIX 6.1 bootable media， providing it is TL02 or later


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A system administrator completed an upgrade of the maintenance level of their AIX system. Which of the following commands should be run to verify that the operating system is in a consistent state？（）

    • A、instfix -i
    • B、lslpp -l
    • C、lppchk -v
    • D、oslevel -r

    正确答案:C

  • 第14题：

    A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）

    • A、/usr/bin/errmsg "System upgraded to AIX 5.2"
    • B、/usr/bin/errlog "System upgraded to AIX 5.2"
    • C、/usr/bin/errupdate "System upgraded to AIX 5.2"
    • D、/usr/bin/errlogger "System upgraded to AIX 5.2"

    正确答案:D

  • 第15题：

    An administrator is installing AIX. The SMS panel lists the following network adapter:NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system. What speed and duplex should be configured on this adapter?（）

    • A、100/Full
    • B、1000/Half
    • C、1000/Auto
    • D、Auto/Auto

    正确答案:D

  • 第16题：

    An AIX system administrator wants to reset the level at which the SIGDANGER signal is sent to processes so appropriate actions can be taken when paging space is running low.  Which of the following commands is used to reset the level？（）

    • A、 vmtune -w
    • B、 svmon -w
    • C、 schedtune -w
    • D、 vmstat -s

    正确答案:A

  • 第17题：

    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）

    • A、A 5.1 AIX base media set
    • B、A 5.1 Additional Device Driver CD
    • C、A mksysb of the multiprocessor chrp server
    • D、A savevg of the uniprocessor microchannel server

    正确答案:A

  • 第18题：

    单选题
    The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
    A

    It is a hardware problem caused by the power failure.

    B

    There is a network problem, most probably with name resolution.

    C

    Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.

    D

    Some filesets may be marked as broken and need to be reinstalled.


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    An AIX system administrator wants to reset the level at which the SIGDANGER signal is sent to processes so appropriate actions can be taken when paging space is running low.  Which of the following commands is used to reset the level？（）
    A

     vmtune -w

    B

     svmon -w

    C

     schedtune -w

    D

     vmstat -s


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）
    A

    A 5.1 AIX base media set

    B

    A 5.1 Additional Device Driver CD

    C

    A mksysb of the multiprocessor chrp server

    D

    A savevg of the uniprocessor microchannel server


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）
    A

    bos.rte is corrupted and needs to be reinstalled.

    B

    The system administration needs to reboot the system.

    C

    The /root part of bos.rte was installed but not the user part. Reinstall the missing software.

    D

    The update CD needs to be applied with the smitty update_all command.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）
    A

    bos.rte is corrupted and needs to be reinstalled.

    B

    The system administration needs to reboot the system.

    C

    The /root part of bos.rte was installed but not the user part. Reinstall the missing software.

    D

    The update CD needs to be applied with the smitty update_all command.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    When trying to run topas on an AIX 4.3.x system， the system administrator gets the error message "ksh： topas：  not found."   Which of the following options is the most likely reason this occurred？（）
    A

     The fileset bos.perf.tools is not loaded on this system.

    B

     The fileset perfagent.tools is not loaded on this system.

    C

     The command topas is only available in AIX version 5.x.

    D

     The path variable does not include /usr/samples/kernel/. Either add it to the .profile or cd to that location and run the command again.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A system administrator completed an upgrade of the maintenance level of their AIX system. Which of the following commands should be run to verify that the operating system is in a consistent state？（）
    A

    instfix -i

    B

    lslpp -l

    C

    lppchk -v

    D

    oslevel -r


    正确答案： C
    解析： 暂无解析

相关内容