10.10.0.0/16
172.16.1.0/24
172.16.20.0/22
192.168.33.64/26
第1题:
The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?()Network Next Hop Metric LocPrf Weight Path* 130.1.1.0/28 1.1.1.1 0 1 2 3 4 i
A. The route is learne d from an eBGP peer
B. The route has no more than three ASNs in the AS_PatH
C. The route is the best route for this prefix
D. None of these facts can be positively determined by this output
第2题:
Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?()External data:Originating router is 10.1.1.1AS number of route is 1External protocol is OSPF, external metric is 64Administrator tag is 0 (0x00000000)
A. R1 is the router that redistributed the route
B. R1‘s metric to reach subnet 10.2.2.0/24 is 64
C. The route was redistributed on a router that has a router ospf 1 command configured
D. R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF
第3题:
A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.
B. Router R1 will advertise both rou tes.
C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.
D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.
第4题:
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?()
第5题:
Refer to the exhibit. On the basis of the information in the exhibit, which two statements are true?()
第6题:
Given the output from a show route extensive command (some information removed): 10.10.0.0/16 (2 entries, 1 announced) Communities: 64512:666 90:4070 5834:66 172.16.1.0/24 (1 entries, 1 announced) Communities: 65000:1696 1234:666 50:7090 172.16.20.0/22 (1 entries, 1 announced) Communities: 65544:1000 80:1001 8431:14952 192.168.33.64/26 (2 entries, 1 announced) Communities: 10:4307 9231:1071 64512:999 Which two routes appear when a show route community 64512:* command is executed?()
第7题:
Given the output from a show route extensive command (some information removed): 10.10.0.0/16(2 entries, 1 announced) Communities: 64512:666 90:4070 5834:66 172.16.1.0/24(1 entries, 1announced) Communities: 65000:1696 1234:666 50:7090 172.16.20.0/22 (3 entries, 1 announced)Communities: 65544:1000 80:1001 8431:14952 192.168.33.64/26 (2 entries, 1 announced) Communities:10:4307 9231:1071 64512:999 Which two routes appear when a show route community 64512:* command is executed?()
第8题:
Given the community: communitymy-company members "^[1-3]*7:666$"; Which four communities does this expression match?()
第9题:
10.10.0.0/16
172.16.1.0/24
172.16.20.0/22
192.168.33.64/26
第10题:
When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded toSanJose2 because of the higher MED value of SanJose2
The serial 0/0/1 interface on the ISP router has been configured with the set metric 50command
The output was generated by entering the show ip bgp command on the SanJose1 router
The output was generated by entering the show ip bgp command on the ISP router
The serial 0/0/1 interface on the ISP router has been configured with the set metric 75command
When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded toSanJose1 because of the lower MED value of SanJose1
第11题:
R1 has a neighbor 1.1.1.1 command configured.
R1 has a neighbor 2.2.2.2 command configured.
The show ip bgp command lists a line for 190.1.0.0/16 with both an > and an i on the left.
R1 is in ASN 1.
第12题:
10.10.0.0/16
172.16.1.0/24
172.16.20.0/22
192.168.33.64/26
第13题:
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?()
A. show ip route
B. show ip eigrp topology
C. show ip ospf topology
D. show ip eigrp topology 10.1.1.0/24
第14题:
Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? ()
A. Add the area 1 stub command on routers R1.
B. Add the always keyword to the default - information originate configuration command on router R2.
C. Remov e the default information originate configuration command from router R2 and place it on router R1.
D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.
第15题:
How do routers in an IS-IS Level-1 domain exit to reach other Level-1 (L1) domains?()
第16题:
What is the purpose of this command in a Cisco Application Control Engine?() switch/Admin# show np 1 me-stats "-F0 v"
第17题:
Which action occurs when the BGP route 20.1.0.0/16 is evaluated by the policy expression?() [editpolicy-options] policy-statementreject_10 { from{ route-filter20.1.0.0/16orlongerM } then{ communityadd 90-1; accept }} policy-statementaccept_20 { from{ route-filter20.1.0.0/16orlongerM } then{ communityadd 100-1; reject; } } community100-1 members 100:1; community90-1 members 90:1 [editprotocols] bgp{ groupebgp-group { neighbor172.16.201.1 { export(reject-10 && accept-20); }}}
第18题:
The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?() Network Next Hop Metric LocPrf Weight Path * 130.1.1.0/28 1.1.1.1 0 1 2 3 4 i
第19题:
Given the community: community my-company members "^[1-3]*7:666$"; Which three communitiesdoes this expression match?()
第20题:
Level-1(L1) routers use default routes announced by Level-2(L2) routers in Level-1(L1) domain
Level-1 routers use default routes installed based on ATT bit (Attach Bit) in announcements from Level-1-2(L1/L2) router
Level-1 routers use specific routes, for other Level-1 domain, announced by Level-1-2(L1/L2) by route-leaking feature of Cisco IOS
Level-1 routers use specific routes, for other Level-1 domain, announced by Level-2(L2) by route-leaking feature of Cisco IOS
第21题:
10.10.0.0/16
172.16.1.0/24
172.16.20.0/22
192.168.33.64/26
第22题:
P1R1 is the exi t point out of the area for P1R3.
P1R1 is a level - 1 only IS - IS router.
P1R1 has been configured with a nondefault IS - IS metric.
P1R3 is a level - 2 only IS - IS router.
P1R3has been configured with a nondefault IS - IS metric.
P1R3 routing ta ble should contain i L2 entries.
第23题:
17:666
17:667
27:666
37:666
47:666
777:666
117:666
第24题:
17:666
17:667
27:666
37:666
47:666