In the BIOS, the onboard video adapter must be disabled.
The video resolution is set too high.
The LCD panel is defective.
The drivers for the new video card must be installed before installing the card.
第1题:
A customer reports to Karen, a technician, that he is experiencing problems with the display after his computer is fully booted but reports seeing the BIOS splash screen during boot. Which of the following would MOST likely be the cause?()
第2题:
A laptop will not output to a connected projector. Which of the following steps should a technician take FIRST?()
第3题:
A customer reports to Karen, a technician, that a PC’s video card has recently been upgraded and the computer reboots randomly. The last few restarts have happened during movie playback, playing a video game, and video editing. Which of the following is the MOST likely source of this issue?()
第4题:
A technician has replaced a video card with another manufacturer’s video card. The driverinstallation does not complete. Which of the following steps should the technician take FIRST?()
第5题:
A new processor was recently installed on a one year old motherboard, replacing the original processor. The processor is on the motherboard’s supported processor list and was double checked for proper installation. However, the PC refuses to POST properly and displays no video onscreen. Which of the following is the MOST likely issue?()
第6题:
A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? ()
第7题:
Reseat all power connections.
Remove the CMOS battery.
Install the graphics card.
Ground to the case.
第8题:
The display is defective.
The video card needs to be flashed.
The internal adapter has not been disabled.
The new video card is defective.
第9题:
Too much thermal paste was used on the processor and it is preventing boot.
The motherboard needs to have its PWD jumper removed before the first boot.
The motherboard needs to have the most recent BIOS version installed.
The motherboard needs to have a newer CMOS chip installed.
第10题:
The monitor cannot display the increased resolution that is a feature of the new graphics card.
The power supply does not provide enough wattage to power the new graphics card.
The new graphics card is incompatible with the existing processor.
The computer does not have enough RAM to support the new graphics card.
第11题:
The technician used generic thermal paste.
The processor had pins broken during installation.
The memory is incompatible with the new CPU.
An incorrect fan size was installed on the heatsink.
第12题:
The motherboard only supports 3.3v AGP Cards.
The motherboard only supports universal cards.
The video card is defective.
The slot covers are misaligned.
第13题:
Which of the following devices will be plugged into an AGP slot on a motherboard?()
第14题:
A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?()
第15题:
An 8X AGP video card will not fit into the AGP slot. Which of the following may be the cause?()
第16题:
A technician installed a new video card on a motherboard which has onboard video. When the monitor was plugged into the new card and the power was turned on, a no signal message appeared on the monitor. Which of the following is MOST likely the issue?()
第17题:
A technician has just completed a CPU upgrade on a motherboard. Which of the following will MOST likely cause the PC not to boot?()
第18题:
Enable the device in Device manager
Install new driver from Device Manager
Disable PNP and install manually
Copy the manufacturer's driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.
第19题:
Resolution
Colors
Dots per inch
Refresh rate
第20题:
The card is not compatible with the hardware of the machine.
The graphic driver for the card is corrupt.
The video card requires additional power.
The software the user is running is incompatible for the video card.
第21题:
Use a jumper from the motherboard where the new drive is going to be installed.
Use a jumper from a hard drive that is no longer functioning.
Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.
The new hard drive must be replaced
第22题:
Run CHKDSK
Boot to ERD
Run MSCONFIG
Go into Safe Mode
第23题:
The video cable is incorrectly attached.
A corrupted or incorrect video driver is installed.
An incorrect video card is installed in the computer.
The video card is defective and needs to be replaced.