InstallServerGuide CD/DVD,boot the HX5 blade and follow the prompts
Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts
Press F1 while the HX5 is booting,incert the CD/DVD and select OK
Mount the IMM virtual disk
第1题:
A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue?()
第2题:
What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?()
第3题:
Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?()
第4题:
A customer is interested in PS700 Blade with 32GB of memory. The Blade will have 4 partitions sharing resources equally. They want the least expensive operating system that supports Live Partition Mobility. Which of the following AIX Editions address their requirement?()
第5题:
A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? ()
第6题:
Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts
Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts
Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK
Mount the IMM virtual disk
第7题:
InstallServerGuide CD/DVD,boot the HX5 blade and follow the prompts
Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts
Press F1 while the HX5 is booting,incert the CD/DVD and select OK
Mount the IMM virtual disk
第8题:
Two additional power supplies
Fibre Channel (FC) switches and SAN storage
A Nortel 1/10 GB ESM
SSD for the HX5
第9题:
4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server
Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module
Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module
Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server
第10题:
Redundant Blowers
Availability of AMD and Intel Processors
Processor density
Advanced Management Module
第11题:
Another HX5
MAX5
HS22V
x3850 X5
第12题:
The floppy drive
The hard drive
The CD-ROM drive
The DVD-ROM drive
第13题:
In order to upgrade from AIX Version 4.3 to AIX Version 5.2, which of the following actions should be performed?()
第14题:
A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000. What is required for the customer to be able to perform this?()
第15题:
Customer requests a HX5 blade but his application may demand more than its 16 memory DIMMS. Software licensing is a big concern. Which of the following additions meets this requirement? ()
第16题:
A customer wants a Blade to run a very memory intensive application. They require 48 GB with later expansion to 160 GB using 4 GB DIMMs. Which of the following products supports this requirement?()
第17题:
An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However, the system does not boot from this CD. What is the MOST likely cause of this problem?()
第18题:
free partners from design tasks, which increases profitability
focus on the prepare phase of thecisco lifecycle services model, which maximizes revenue
enable partners to increase professional services revenue by providing A complete, integrated solution for midsize firms and SMBs
highlight additional point products that the customer may want
第19题:
Verify all HBA settings.
Upgrade the blade firmware.
Upgrade the OS level HBA drivers.
Set the system to boot from the local disk.
第20题:
Basic
Express
Standard
Enterprise
第21题:
Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD
第22题:
The CD is defective.
The CD is not bootable.
The CD-ROM drive is defective.
The Boot Sequence is not set in the BIOS to boot first from the CD
第23题:
Fibre Channel Expansion Card for each Blade Server
cKVM Card for each Blade Server
iSCSI Expansion Card for each Blade Server
4Gb Modular Flash Drive
第24题:
Insert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts
Boot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts
Press F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK
Use the Remote Supervisor Adapter virtual disk