Grace-time
Restart-time
Stale-routes-time
Restart-update-time
第1题:
A. The BGP session to the 10.3.3.3 neighbor is established, but the router has not received any BGP routing updates from the 10.3.3.3 neighbor.
B. The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor.
C. The router is attempting to establish a BGP peering session with the 10.1.1.1 neighbor.
D. The BGP session to the 10.3.3.3 neighbor is established.
E. The BGP session to the 10.2.2.2 neighbor is established.
F. The BGP session to the 10.1.1.1 neighbor is established.
第2题:
In which two ways does the BGP graceful restart capability preserve prefix information during a restart?()
第3题:
What are the two benefits of graceful restart?()
第4题:
Which three pre-conditions must be met before an OSPF router can perform graceful restart?()
第5题:
The OSPF RFC 3623 Graceful Restart feature allows you to configure IETF NSF in ultivendor networks. When using OSPF Graceful Restart,which mechanism is used tocontinue forwarding packets during a switchover?()
第6题:
BGP协议为了支持GR,做了如下扩展()。
第7题:
Which pre-conditions must be met before an OSPF router can perform graceful restart?()
第8题:
Which three pre-conditions must be met before an OSPF router can perform graceful restart? ()
第9题:
an open message with the E bit set
an update message with the E bit set
an open message with an end-of-RIB marker
an update message with an end-of-RIB marker
第10题:
It tears down the BGP session.
It sends a restart message to the peer.
It marks all routes from that peer as stale.
It sends a BGP refresh message to the peer
第11题:
debug ip bgp updates
debug ip tcp events
debug ip bgp transactions
debug ip tcp transactions
第12题:
The peer router immediately removes the BGP routers that it learned from the restarting router from itsBGP routing tables.
The router establishes BGP sessions with other routers and relearns the BGP routes from others that are also capable of graceful restart. The restarting router waits to receive updates from the neighboringrouters. When the neighboring routers send end-of-RIB messages to indicate that they are donesending updates,the restarting router starts sending its own updates.
The peer router sends an end-of-RIB message to the restarting router.
The restarting router removes any stale prefixes after the timer for stale entries expires.
The restarting router does not remove any stale prefixes after the timer for stale entries expires.
第13题:
A.A
B.B
C.C
D.D
E.E
F.F
第14题:
In which of the following BGP-related events is an End-of-RIB (EOR) message sent?()
第15题:
Which two features must be configured to perform AToM NSF?()
第16题:
Which graceful restart parameter is negotiated during BGP session establishment?()
第17题:
In which two ways does the BGP graceful capability preserve prefix information during a restart?()
第18题:
Which setting in JUNOS software forces a bgp speaker to wait for a bgp neighbor to initiate a bgp session?()
第19题:
Which action does a BGP speaker take when it detects that the reset state bit is set in an openmessage?()
第20题:
wait
hold
passive
authenticate
第21题:
Reverse Path Forwarding
Hardware-based forwarding
UDP forwarding
Layer 2 Forwarding
第22题:
在BGP的OPEN消息中,增加了一种表示GR的能力,称为Graceful Restart Capability。这种能力被BGP用来向邻居表示其支持Graceful restart的能力
在Keepalive报文中增加TLV211表明路由器发生了重启
定义了两个重要的定时器:Restart timer和Wait-For-EOR timer
在Update报文中,新增加一个EOR(End-of-RIB)标志,用于表明路由信息向邻居更新完毕
第23题:
Graceful restart allows session information recovery without disruption to the network.
A node can perform a graceful restart to help a neighbor recover its state. The label bindings are kepton state information, which helps the failed node recover faster and does notaffect the current for wardtraffic.
Graceful restart allows a node to recover state from its neighbor when there is no RP or before thedevice undergoes SSO.
Graceful restart does not allow session information recovery.
During a graceful restart, the router removes any stale prefixes after a timer for stale entries expires