set interfaces ge-0/3/0 unit 0 metric 10
set protocols ospf reference-bandwidth 10g
set interfaces ge-0/3/0 unit 0 bandwidth 10g
set protocols ospf area 0 interface ge-0/3/0 metric 10
set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g
第1题:
A.show interfaces queue ge-0/0/0
B.show statistics queue detail
C.show interfaces ge-0/0/0 statistics extensive
D.monitor interface ge-0/0/0 queue
第2题:
A.Issue the operational command clear interfaces ge-0/0/0 loopback local.
B.No command is necessary, the loopback times-out in 5 minutes.
C.Issue the configuration command clear interfaces ge-0/0/0 loopback, then commit.
D.Issue the configuration command delete interfaces ge-0/0/0 gigether-options loopback , then commit.
第3题:
Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software?()
第4题:
Which command sequence shows traffic per queue for an interface?()
第5题:
Which command sequence displays queue statistics for an interface?()
第6题:
You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?()
第7题:
Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?()
第8题:
Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 inJUNOS software?()
第9题:
set security zones management interfaces ge-0/0/0.0
set zones functional-zone management interfaces ge-0/0/0.0
set security zones functional-zone management interfaces ge-0/0/0.0
set security zones functional-zone out-of-band interfaces ge-0/0/0.0
第10题:
set interfaces ge-0/3/0 unit 0 metric 10
set protocols ospf reference-bandwidth 10g
set interfaces ge-0/3/0 unit bandwidth 10g
set protocols ospf area 0 interface ge-0/3/0 metric 10
set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g
第11题:
set protocols set ospf area 0 set interface so-0/0/0.100
set protocols ospf area 0 interface so-0/0/0.100
edit protocols ospf interface so-0/0/0.100
edit protocols ospf area 0 set interface so-0/0/0.100
第12题:
set protocols setospf area 0 set interface so-0/0/0.100
set protocols ospf area 0 interface so-0/0/0.100
edit protocols ospf interface so-0/0/0.100
edit protocols ospf area 0 set interface so-0/0/0.100
第13题:
A. ge-0/0/1
B. ge-0/0/2
C. ge-0/0/3
D. ge-0/0/4
第14题:
A.# set interfaces ge-0/0/0 unit 0 loopback
B.# set interfaces ge-0/0/0 gigether-options loopback
C.> set interfaces ge-0/0/0 loopback
D.> loopback ge-0/0/0
第15题:
You are configuring a new BGP neighbor and want to view the configuration of interface ge-0/0/0.42. Which command do you use to achieve this result?()
第16题:
How is a loopback cleared on interface ge-0/0/0?()
第17题:
You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?()
第18题:
Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?()
第19题:
Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?()
第20题:
set protocols set ospf area 0 set interface so-0/0/0.100
set protocols ospf area 0 interface so-0/0/0.100
edit protocols ospf interface so-0/0/0.100
edit protocols ospf area 0 set interface so-0/0/0.100
第21题:
set interfaces ge-0/0/0.0 address 10.1.1.1/24
set interfaces ge-0/0/0.0 family inet address 10.1.1.1/24
set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24
set interfaces ge-0/0/0 address 10.1.1.1/24
第22题:
set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0
set ip interface ge-0/0/0 address 192.168.1.1/24
set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0
set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24
第23题:
set interfaces ge-0/3/0 unit 0 metric 10
set protocols ospf reference-bandwidth 10g
set interfaces ge-0/3/0 unit 0 bandwidth 10g
set protocols ospf area 0 interface ge-0/3/0 metric 10
set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g
第24题:
ge-0/0/1
ge-0/0/2
ge-0/0/3
ge-0/0/4