niusouti.com

单选题You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A [edit security

题目
单选题
You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）
A

[edit security policies from-zone HR to-zone HR]

B

[edit security zones functional-zone management protocols]

C

[edit security zones protocol-zone HR host-inbound-traffic]

D

[edit security zones security-zone HR host-inbound-traffic protocols]

相似考题

1.Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation.Which type of NAT must you configure?（）A. source NAT with address shiftingB. pool-based source NATC. static destination NATD. pool-based destination NAT

2.You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A. [edit security policies from-zone HR to-zone HR]B. [edit security zones functional-zone management protocols]C. [edit security zones protocol-zone HR host-inbound-traffic]D. [edit security zones security-zone HR host-inbound-traffic protocols]

3.Your network administrator has asked you to view the real－time interface usage on ge－0／0／0. Which command would be used?()A. monitor interface ge-0/0/0B. traceoptions interface ge-0/0/0C. debug interface ge-0/0/0D. monitor usage ge-0/0/0

4.You want to create an out－of－band management zone and assign the ge－0／0／0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?()A. set security zones management interfaces ge-0/0/0.0B. set zones functional-zone management interfaces ge-0/0/0.0C. set security zones functional-zone management interfaces ge-0/0/0.0D. set security zones functional-zone out-of-band interfaces ge-0/0/0.0

更多“单选题You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A [edit security”相关问题

  • 第1题：

    Referring to the exhibit, you are unable to commit the configuration for the ge－0／0／1 interface. What must you do to commit the configuration?()

    A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.

    B. You must use the rename command to change unit 100 to unit 0.

    C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-0/0/1] hierarchy.

    D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100] hierarchy.


    参考答案：A

  • 第2题：

    You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100. Which two achieve this result?（）

    • A、set protocols   set ospf area 0   set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0   set interface so-0/0/0.100

    正确答案:B,D

  • 第3题：

    Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation. Which type of NAT must you configure?（）

    • A、source NAT with address shifting
    • B、pool-based source NAT
    • C、static destination NAT
    • D、pool-based destination NAT

    正确答案:D

  • 第4题：

    You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）

    • A、[edit security policies from-zone HR to-zone HR]
    • B、[edit security zones functional-zone management protocols]
    • C、[edit security zones protocol-zone HR host-inbound-traffic]
    • D、[edit security zones security-zone HR host-inbound-traffic protocols]

    正确答案:D

  • 第5题：

    You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）

    • A、[edit interfaces]
    • B、[edit security zones]
    • C、[edit system services]
    • D、[edit security interfaces]

    正确答案:B

  • 第6题：

    You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?（）

    • A、[edit protocols bgp group external]    user@router# set interfaces ge-0/0/0.42 ?
    • B、[edit protocols bgp group external]    user@router# edit show interfaces ge-0/0/0.42
    • C、[edit protocols bgp group external]    user@router# top show interfaces ge-0/0/0.42
    • D、[edit protocols bgp group external]    user@router# show interfaces ge0/0/0.42

    正确答案:C

  • 第7题：

    You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?（）

    • A、set protocols    set ospf area 0    set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0 set interface so-0/0/0.100

    正确答案:B,D

  • 第8题：

    单选题
    Your network administrator has asked you to view the real-time interface usage on ge-0/0/0. Which command would be used?（）
    A

    monitor interface ge-0/0/0

    B

    traceoptions interface ge-0/0/0

    C

    debug interface ge-0/0/0

    D

    monitor usage ge-0/0/0


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?（）
    A

    set security zones management interfaces ge-0/0/0.0

    B

    set zones functional-zone management interfaces ge-0/0/0.0

    C

    set security zones functional-zone management interfaces ge-0/0/0.0

    D

    set security zones functional-zone out-of-band interfaces ge-0/0/0.0


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）
    A

    [edit security policies from-zone HR to-zone HR]

    B

    [edit security zones functional-zone management protocols]

    C

    [edit security zones protocol-zone HR host-inbound-traffic]

    D

    [edit security zones security-zone HR host-inbound-traffic protocols]


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?（）
    A

    [edit protocols bgp group external]    user@router# set interfaces ge-0/0/0.42 ?

    B

    [edit protocols bgp group external]    user@router# edit show interfaces ge-0/0/0.42

    C

    [edit protocols bgp group external]    user@router# top show interfaces ge-0/0/0.42

    D

    [edit protocols bgp group external]    user@router# show interfaces ge0/0/0.42


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）
    A

    [edit interfaces]

    B

    [edit security zones]

    C

    [edit system services]

    D

    [edit security interfaces]


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software？（）

    • A、set interfaces ge-0/3/0 unit 0 metric 10
    • B、set protocols ospf reference-bandwidth 10g
    • C、set interfaces ge-0/3/0 unit bandwidth 10g
    • D、set protocols ospf area 0 interface ge-0/3/0 metric 10
    • E、set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g

    正确答案:B,D

  • 第14题：

    You are configuring a new BGP neighbor and want to view the configuration of interface ge-0/0/0.42. Which command do you use to achieve this result?（）

    • A、[edit protocols bgp group external]   user@router# set interfaces ge-0/0/0.42
    • B、[edit protocols bgp group external]   user@router# edit show interfaces ge-0/0/0.42
    • C、[edit protocols bgp group external]   user@router# top show interfaces ge-0/0/0.42
    • D、[edit protocols bgp group external]   user@router# show interfaces ge-0/0/0.42

    正确答案:C

  • 第15题：

    Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）

    • A、source NAT with address shifting
    • B、pool-based source NAT
    • C、static destination NAT
    • D、pool-based destination NAT

    正确答案:D

  • 第16题：

    You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）

    • A、[edit security policies from-zone HR to-zone HR]
    • B、[edit security zones functional-zone management protocols]
    • C、[edit security zones protocol-zone HR host-inbound-traffic]
    • D、[edit security zones security-zone HR host-inbound-traffic protocols]

    正确答案:D

  • 第17题：

    You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?（）

    • A、set protocols   setospf area 0   set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0   set interface so-0/0/0.100

    正确答案:B,D

  • 第18题：

    You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?（）

    • A、set security zones management interfaces ge-0/0/0.0
    • B、set zones functional-zone management interfaces ge-0/0/0.0
    • C、set security zones functional-zone management interfaces ge-0/0/0.0
    • D、set security zones functional-zone out-of-band interfaces ge-0/0/0.0

    正确答案:C

  • 第19题：

    Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 inJUNOS software?（）

    • A、set interfaces ge-0/3/0 unit 0 metric 10
    • B、set protocols ospf reference-bandwidth 10g
    • C、set interfaces ge-0/3/0 unit 0 bandwidth 10g
    • D、set protocols ospf area 0 interface ge-0/3/0 metric 10
    • E、set protocols ospf area 0 interface ge-0/3/0 bandwidth 10g

    正确答案:B,D

  • 第20题：

    单选题
    Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）
    A

    source NAT with address shifting

    B

    pool-based source NAT

    C

    static destination NAT

    D

    pool-based destination NAT


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Your network administrator has asked you to view the real-time interface usage on ge-0/0/0, Which command whould be used?（）
    A

    monitor interface ge0/0/0

    B

    traceoptions interface ge-0/0/0

    C

    debug interface ge0/0/0

    D

    monitor usage ge-0/0/0


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）
    A

    [edit security policies from-zone HR to-zone HR]

    B

    [edit security zones functional-zone management protocols]

    C

    [edit security zones protocol-zone HR host-inbound-traffic]

    D

    [edit security zones security-zone HR host-inbound-traffic protocols]


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation. Which type of NAT must you configure?（）
    A

    source NAT with address shifting

    B

    pool-based source NAT

    C

    static destination NAT

    D

    pool-based destination NAT


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    You are configuring a new BGP neighbor and want to view the configuration of interface ge-0/0/0.42. Which command do you use to achieve this result?（）
    A

    [edit protocols bgp group external]   user@router# set interfaces ge-0/0/0.42

    B

    [edit protocols bgp group external]   user@router# edit show interfaces ge-0/0/0.42

    C

    [edit protocols bgp group external]   user@router# top show interfaces ge-0/0/0.42

    D

    [edit protocols bgp group external]   user@router# show interfaces ge-0/0/0.42


    正确答案： C
    解析： 暂无解析

相关内容