niusouti.com

单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician 

题目
单选题
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）
A

 backup the BIOS configuration to use later

B

 install the BIOS update from a command prompt

C

 create a bootable floppy and copy the BIOS update tools to the floppy

D

 read the manufacturer’s guidelines and recommendations on installing the update

相似考题

1.After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）A、Replace the second drive with a hot swappable one.B、Swap the drive boot order in the BIOSC、Make the second disk active under the disk management tool.D、Rebuild the array using the hardware RAID tool at boot.

2.A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）A、Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management proceduresB、Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking informationC、Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）D、Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams

3. A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）A、 backup the BIOS configuration to use laterB、 install the BIOS update from a command promptC、 create a bootable floppy and copy the BIOS update tools to the floppyD、 read the manufacturer’s guidelines and recommendations on installing the update

4. A network technician arrives to work and discovers users are having a problem connecting the company server. The server operator was working on upgrades the night before. Which of the following documents should the technician use to attempt to discover the problem?（）A、Network mapsB、Change managementC、BaselinesD、Cable management

更多“单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician ”相关问题

  • 第1题：

    A technician wants to compare a new server performance over a period of time. Which of the following should the technician do FIRST?（）

    • A、Monitor processor performance logs
    • B、Constantly check the task manager
    • C、Use performance server logs
    • D、Establish a baseline for the server

    正确答案:D

  • 第2题：

    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

    • A、Install a larger fan near the hard drive to cool the system.
    • B、Clean the drive with compressed air and continue to use it.
    • C、Remove and replace the drive.
    • D、Apply more thermal compound and reseat the drive.

    正确答案:C

  • 第3题：

    A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）

    • A、Storage driver not loaded
    • B、Fragmented hard drive
    • C、Damaged or faulty NIC chipset
    • D、Damaged or faulty system board
    • E、Memory incompatible with the processor
    • F、Missing voltage regulator

    正确答案:D,E

  • 第4题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第5题：

    A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later， the client calls and says that the burner is no longer working. The technician learns that the drive reads CDs and DVDs， but will no longer burn DVDs. When arriving on site， what is the FIRST action that the technician should take？（）

    • A、check for a faulty IDE cable
    • B、be sure that the DVD+R is formatted before using it
    • C、check for incompatible media
    • D、re-install the DVD burning software

    正确答案:C

  • 第6题：

    单选题
    Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）
    A

     the server vendor’s FAQ website

    B

     the SCSI controller vendor’s user manual

    C

     the drive enclosure vendor’s user manual

    D

     the network operating system vendor’s website


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）
    A

    Replace the second drive with a hot swappable one.

    B

    Swap the drive boot order in the BIOS

    C

    Make the second disk active under the disk management tool.

    D

    Rebuild the array using the hardware RAID tool at boot.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）
    A

    Add another hard drive and use that available space.

    B

    Run FDISK.

    C

    Use the Disk Management tool.

    D

    Back up all important data to an external drive then reformat the hard drive.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is troubleshooting a CD/DVD drive. There is a disk in the drive and the tray wont eject. Which of the following actions should the technician take FIRST？ （）
    A

    Shutdown， restart and verify that the BIOS recognizes the drive and try again.

    B

    Replace the CD/DVD drive.

    C

    Pry the tray open with a small， flat head screwdriver.

    D

    Place the end of a paper clip in the emergency eject pinhole on the CD/DVD drive.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    A technician wants to secure a Windows 7 Ultimate notebook hard drive. Which of the following should the technician do to implement BitLocker?（） (Select TWO).
    A

    Disable TPM in the system BIOS

    B

    Run the BitLocker wizard and any necessary partitions

    C

    Enable TPM in the system BIOS

    D

    Enable TPM in the Windows 7 OS files

    E

    Set up the OS and the system files on the same partition


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    单选题
    A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）
    A

    Space reserved by the drive manufacturer for firmware.

    B

    Space set aside by Windows for use by the virtual memory swap file.

    C

    A potentially dangerous virus has been downloaded onto the system.

    D

    A recovery partition put there by the manufacturer.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）

    • A、RAID 0
    • B、RAID 1
    • C、RAID 3
    • D、RAID 5

    正确答案:B

  • 第14题：

    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

    • A、Add another hard drive and use that available space.
    • B、Run FDISK.
    • C、Use the Disk Management tool.
    • D、Back up all important data to an external drive then reformat the hard drive.

    正确答案:C

  • 第15题：

    Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）

    • A、 the server vendor’s FAQ website
    • B、 the SCSI controller vendor’s user manual
    • C、 the drive enclosure vendor’s user manual
    • D、 the network operating system vendor’s website

    正确答案:C

  • 第16题：

    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

    • A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
    • B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
    • C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
    • D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

    正确答案:D

  • 第17题：

    多选题
    A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）
    A

    Storage driver not loaded

    B

    Fragmented hard drive

    C

    Damaged or faulty NIC chipset

    D

    Damaged or faulty system board

    E

    Memory incompatible with the processor

    F

    Missing voltage regulator


    正确答案： D,A
    解析： 暂无解析

  • 第18题：

    单选题
    A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）
    A

    Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management procedures

    B

    Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking information

    C

    Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）

    D

    Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
    A

    Install a larger fan near the hard drive to cool the system.

    B

    Clean the drive with compressed air and continue to use it.

    C

    Remove and replace the drive.

    D

    Apply more thermal compound and reseat the drive.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）
    A

    RAID 0

    B

    RAID 1

    C

    RAID 3

    D

    RAID 5


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later， the client calls and says that the burner is no longer working. The technician learns that the drive reads CDs and DVDs， but will no longer burn DVDs. When arriving on site， what is the FIRST action that the technician should take？（）
    A

    check for a faulty IDE cable

    B

    be sure that the DVD+R is formatted before using it

    C

    check for incompatible media

    D

    re-install the DVD burning software


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A network technician arrives to work and discovers users are having a problem connecting the company server. The server operator was working on upgrades the night before. Which of the following documents should the technician use to attempt to discover the problem?（）
    A

    Network maps

    B

    Change management

    C

    Baselines

    D

    Cable management


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）
    A

    Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.

    B

    Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.

    C

    Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.

    D

    Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.


    正确答案： D
    解析： 暂无解析

相关内容