niusouti.com

单选题System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）A The LPAR Configuration backup is co

题目
单选题
System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
A

The LPAR Configuration backup is corrupt

B

The LPAR Configuration has been altered using DLPAR

C

The LPAR Configuration backup was performed on a different HMC

D

The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

相似考题

1.The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.

2. A company uses an application that creates temp files that need to be backed up on a daily basis. A test restore fails to restore the temp files. In checking the backup catalog, Karen, a technician, discovers that the temp files are not being backed up. Which of the following is the MOST likely reason?（）A、To backup temp files, the /T switch must be used.B、NTBACKUP does not backup temp files by default.C、The NTBACKUP utility cannot backup temp files.D、NTBACKUP is not running under the correct credentials.

3. A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

4. After making changes to the router, you issue the "copy running-config startup-config" command to save changes. After reloading the router, the router comes up in setup mode. You again make changes, save them, and reboot. Again,the router comes up in setup mode. What is the most likely cause of this?（）A、The NVRAM is corrupted.B、The boot system commands were omitted in the configuration.C、The configuration register setting is incorrect.D、The upgraded configuration incompatible with the hardware platform.E、The upgraded IOS incompatible with the hardware.

更多“单选题System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）A The LPAR Configuration backup is co”相关问题

  • 第1题：

    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）

    • A、The profile data was not initialized after restoring the backup CD
    • B、The profile data was not backed up before doing the Critical Console Data backup
    • C、A Critical Console Data backup was performed which backs up user data， but not profile data
    • D、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

    正确答案:B

  • 第2题：

    The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）

    • A、The uncapped weight has been set to 0.
    • B、The uncapped weight has been set to 128.
    • C、The processing unit for that partition was set to .1 processing units. A full processor was  assigned.
    • D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.

    正确答案:A

  • 第3题：

    SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）

    • A、SLES does not perform well with DHCP
    • B、SLES was installed with the default host name of Linux
    • C、Virtual Network Resources are being used, which is not supported in a SLES environment
    • D、The SLES instance was installed in 32-bit mode, where 64-bit should have been selected

    正确答案:B

  • 第4题：

    You have a computer that runs Windows XP professional. The computer contains one partition and a floppy disk drive. You connect a new USB drive. You need to back up the computer to meet the following requirements: Enable a complete recovery if the hard disk fails. Enable an automatic restore of the operating systems. Automatically recreate the partitions during a restore process. What should you do?（）

    • A、From System Restore, create a system restore point.
    • B、From the System Tools menu, run the Files and Settings Transfer Wizard.
    • C、From Windows Backup, run the Automated System Recovery (ASR) Wizard. 
    • D、From Windows Backup, run the Backup Wizard, and then select Only backup the System State data. 

    正确答案:C

  • 第5题：

    You are the network administrator for your company. The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第6题：

    单选题
    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
    A

    DLPAR functions are not available for cloned partitions

    B

    The new partition has the same node number as the original LPAR

    C

    Additional filesets need to be reinstalled after the alt_disk_install cloning

    D

    The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
    A

    The LPAR Configuration backup is corrupt

    B

    The LPAR Configuration has been altered using DLPAR

    C

    The LPAR Configuration backup was performed on a different HMC

    D

    The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    You are a network administrator for All servers run Windows Server 2003. A network server named Testking1 functions as the main file server. Testking1 is backed up each night by using the Backup utility. You perform a test restoration of Testking1 by using the Backup utility. You discover that files that are open during the backup process are not being backed up. You need to ensure that open files are backed up successfully. What should you do?（）
    A

    Enable volume shadow copies on the partitions that are being backed up.

    B

    Disable volume shadow copies on the partitions that are being backed up.

    C

    Select the Verify data after backup check box in the Advanced backup options of the backup job.

    D

    Clear the Disable volume shadow copy check box in the Advanced backup options of the backup job.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    填空题
    What is the probable cause if the fan seems to be running slower than usual?The oven has been put in a ____.

    正确答案： cold area
    解析：
    定位到表格第二行第二列“The oven has been stored in a cold area”。

  • 第10题：

    单选题
    A company uses an application that creates temp files that need to be backed up on a daily basis. A test restore fails to restore the temp files. In checking the backup catalog, Karen, a technician, discovers that the temp files are not being backed up. Which of the following is the MOST likely reason?（）
    A

    To backup temp files, the /T switch must be used.

    B

    NTBACKUP does not backup temp files by default.

    C

    The NTBACKUP utility cannot backup temp files.

    D

    NTBACKUP is not running under the correct credentials.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
    A

    The profile data was not initialized after restoring the backup CD

    B

    The profile data was not backed up before doing the Critical Console Data backup

    C

    A Critical Console Data backup was performed which backs up user data， but not profile data

    D

    A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    You have a computer that runs Windows XP professional. The computer contains one partition and a floppy disk drive. You connect a new USB drive. You need to back up the computer to meet the following requirements: Enable a complete recovery if the hard disk fails. Enable an automatic restore of the operating systems. Automatically recreate the partitions during a restore process. What should you do?（）
    A

    From System Restore, create a system restore point.

    B

    From the System Tools menu, run the Files and Settings Transfer Wizard.

    C

    From Windows Backup, run the Automated System Recovery (ASR) Wizard. 

    D

    From Windows Backup, run the Backup Wizard, and then select Only backup the System State data. 


    正确答案： A
    解析： 暂无解析

  • 第13题：

    The nfsstat -c command shows zero badxid， but retrans and timeouts are sizeable， what is the most probable cause of the problem？（）

    • A、 Too many nfsd’s running
    • B、 Client and server with different buffer sizes
    • C、 Bridges， routers or gateways are receiving too many fragmentated packets
    • D、 Too few nfsd’s running

    正确答案:B

  • 第14题：

    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

    • A、The LPAR Configuration backup is corrupt
    • B、The LPAR Configuration has been altered using DLPAR
    • C、The LPAR Configuration backup was performed on a different HMC
    • D、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

    正确答案:B

  • 第15题：

    You executed the following command in Recovery Manager （RMAN） against your Oracle 10g database：  RMAN> REPORT NEED BACKUP days 3;  What would be the output of this command？（） 

    • A、a list of files that require a backup within three days
    • B、a list of files that have not been backed up for three days
    • C、a list of files that RMAN recommends be backed up only once in every three days， based on low volatility
    • D、a list of files for which a backup has already been performed and may need a backup after three days

    正确答案:B

  • 第16题：

    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第17题：

    单选题
    You executed the following command in Recovery Manager （RMAN） against your Oracle 10g database：  RMAN> REPORT NEED BACKUP days 3;  What would be the output of this command？（）
    A

    a list of files that require a backup within three days

    B

    a list of files that have not been backed up for three days

    C

    a list of files that RMAN recommends be backed up only once in every three days， based on low volatility

    D

    a list of files for which a backup has already been performed and may need a backup after three days


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
    A

    It is a hardware problem caused by the power failure.

    B

    There is a network problem, most probably with name resolution.

    C

    Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.

    D

    Some filesets may be marked as broken and need to be reinstalled.


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）
    A

    The uncapped weight has been set to 0.

    B

    The uncapped weight has been set to 128.

    C

    The processing unit for that partition was set to .1 processing units. A full processor was  assigned.

    D

    The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
    A

    The LPAR Configuration backup is corrupt

    B

    The LPAR Configuration has been altered using DLPAR

    C

    The LPAR Configuration backup was performed on a different HMC

    D

    The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    The nfsstat -c command shows zero badxid， but retrans and timeouts are sizeable， what is the most probable cause of the problem？（）
    A

     Too many nfsd’s running

    B

     Client and server with different buffer sizes

    C

     Bridges， routers or gateways are receiving too many fragmentated packets

    D

     Too few nfsd’s running


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）
    A

    Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.

    B

    Use the Backup utility to back up the contents of all mounted drives.

    C

    Use the Backup utility to back up only the System State data.

    D

    Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.

    E

    Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）
    A

    Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.

    B

    Use the Backup utility to back up the contents of all mounted drives.

    C

    Use the Backup utility to back up only the System State data.

    D

    Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.

    E

    Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）
    A

    SLES does not perform well with DHCP

    B

    SLES was installed with the default host name of Linux

    C

    Virtual Network Resources are being used, which is not supported in a SLES environment

    D

    The SLES instance was installed in 32-bit mode, where 64-bit should have been selected


    正确答案： A
    解析： 暂无解析

相关内容