单选题Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor r

第1题：

Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

• A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
• B、Use DLPAR to move resources from the test LPAR to training when training is active
• C、Install Partition Load Manager to share resources between the test and training environments
• D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

第2题：

Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak.  What is the best configuration to fully utilize the processor resource?（）

• A、Set up the server in SMP mode and use WLM to manage resources effectively
• B、Set up eight dedicated LPARs and use DLPAR to manage resources effectively
• C、Set up a shared pool with eight capped LPARs including production and test/dev
• D、Set up a shared pool with eight uncapped LPARs with priority weight to Production

第3题：

Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?（）

• A、Enable SMT
• B、Reduce the weight
• C、Renice the process
• D、Increase the weight

第4题：

Companycom wants to manage multiple partitions for a p5 590 server using Partition Load Manager (PLM). Some of the partitions are dedicated processors and some of them are shared processors. What information about PLM limitations should be expressed to the customer?（） 

• A、All of the partitions can be managed in one group mixing dedicated and shared processors. PLM will move resources in the group as setup in the PLM profiles. 
• B、PLM handles memory, dedicated and shared processor partitions. All the partitions in a group must be of the same processor type. PLM moves I/O resources between partitions based on PLM policy files. 
• C、PLM handles memory, dedicated and shared processor partitions. The policy file, once loaded, is static and has no knowledge of workload on the managed partitions. PLM is supported for partitions that are running AIX 5.2 or i5OS. 
• D、All of the partitions in a group must be the same type, either all dedicated processor partitions or shared processor partitions. One PLM Server can manage multiple groups of partitions. PLM does not move resources between groups.

第5题：

Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?（）

• A、Dynamic LPAR
• B、Workload Manager
• C、Partition Load Manager
• D、Shared Processor Pools

第6题：

第7题：

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）

• A、Create all the partitions as AIX 5.2， each having two dedicated processors.
• B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.
• C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.
• D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.

第14题：

Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）

• A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARs
• B、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it
• C、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device
• D、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs

第15题：

Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）

• A、Capped and with a lower share
• B、Uncapped and with a lower share
• C、Uncapped and with a higher share
• D、Capped and with no change in share

第16题：

The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）

• A、The uncapped weight has been set to 0.
• B、The uncapped weight has been set to 128.
• C、The processing unit for that partition was set to .1 processing units. A full processor was  assigned.
• D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.

第17题：

Companycom has a p5 595 running 12 LPARs. They are interested in high bandwidth, secure communication between two of the LPARs within the p5 595 server. They do not have any unused Ethernet adapters. Which of the following recommendations will best meet this requirement?（）

• A、Utilize the integrated 10/100/1000 network interface
• B、Implement Virtual Ethernet to enable inter-partition communication
• C、Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs
• D、Implement a Point to Point protocol serial communication between the p5 595 serial ports

第18题：

第19题：

第20题：

第21题：

第22题：

第23题：