Run /usr/sbin/rsct/bin/rmcctrl z as hscroot.
Reboot the HMC, either through the GUI or via the command line.
Disable and re-enable RMC in the Firewall settings in the HMC GUI.
Select the Partition Communication checkbox in the LAN Adapter dialogue box.
第1题:
Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?()
第2题:
Which of the following can deploy system plans generated by the IBM System Planning Tool (SPT)?()
第3题:
An administrator runs clstat on a cluster node and receives the following response: ’Can not get Cluster Information.’ Which of the following daemons may need to be started in order to correct this problem?()
第4题:
Which of the following NIS daemons must run on an AIX NIS client machine?()
第5题:
Which of the following is a feature of Integrated Virtualization Manager (IVM)? ()
第6题:
A graphics monitor must be attached to the server
Cluster System Management (CSM) software must be installed
The LPAR system must have an Hardware Management Console (HMC) connected
Each LPAR must be configured with a CDROM for operating system installation
第7题:
Run /usr/sbin/rsct/bin/rmcctrl z as hscroot.
Reboot the HMC, either through the GUI or via the command line.
Disable and re-enable RMC in the Firewall settings in the HMC GUI.
Select the Partition Communication checkbox in the LAN Adapter dialogue box.
第8题:
Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line.
The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed.
If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run.
The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot.
第9题:
ypbind
ypserv
ypwhich
yppasswdd
第10题:
The systems must use internal storage for boot purposes.
All virtualized Ethernet adapters must be numbered below 10.
The mobile partition’s network and disk access must be virtualized.
Each system must be controlled by a different Hardware Management Console (HMC).
第11题:
It has a GUI interface for upgrading system firmware.
It creates and manages AIX/Linux and VIOS type LPARs.
It can be managed by the Hardware Management Console (HMC).
It supports Live Partition Mobility on POWER6 systems and above.
第12题:
port 21(ftp):tcp and port 657(rmc):tcp
port 22(ssh):tcp and port 657(rmc):udp
port 657(rmc):tcp and port 657(rmc):udp
port 161(snmp):tcp and port 161(snmp):udp
第13题:
Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary. What is necessary for communication between the LPARs and the HMC?()
第14题:
Prior to implementing an LPAR system, which of the following needs to be done?()
第15题:
Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?()
第16题:
A customer is buying 10 new Power 720 servers and will integrate them into their existing data center which also has two Power 595s and five Power 750s, taking the total number of systems to 17. All currently installed systems are managed by a single HMC.All the machines will have dual VIO Servers for redundancy, and 10 client LPARs. How can they manage the new machines for the least cost?()
第17题:
Which of the following NIS daemons must run on an AIX machine configured as an NIS master?()
第18题:
topsvcs
clinfoES
snmpinfo
clsmuxpdES
第19题:
The Hardware Management Console (HMC) and Integrated Virtualization Manager (IVM).
The Hardware Management Console (HMC) and Advanced System Manager Interface (ASMI).
Integrated Virtualization Manager (IVM) and Advanced System Manager Interface (ASMI).
Integrated Virtualization Manager (IVM) and BladeCenter Advanced Management Module (AMM).
第20题:
Purchase a second HMC and use this to manage the new servers.
Connect all of the new servers to the existing private HMC network.
Configure a second private network on their existing HMC for the new servers.
Connect 9 of the new servers to the existing HMC and use Integrated Virtualization Manager on the 10th.
第21题:
ypbind
ypserv
ypwhich
yppasswdd
第22题:
The resources must be unallocated in an LPAR
The microcode on the pSeries must be current
All network adapters on the LPAR must be defined
Network connectivity and name resolution capability between HMC and LPARs
第23题:
An administrative VLAN with port 1808
Port 657 which must remain open to TCP/IP and UDP traffic
Network addresses are provided by DHCP services on the network
DHCP on the HMC is required to be on to communicate between LPAR and HMC
第24题:
Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
Delete all the existing LPARs, create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created, which will own all system resources.