The fuel oil supply system to an automatic auxiliary boiler, will automatically shutdown if the boiler ______.
A.steam demand is high
B.salinity is high
C.safety valve simmers(爆发)
D.burner flame is extinguished
第1题:
Move the fuel control mechanism to the no fuel position
Block the fuel supply by closing the master fuel valve
Shut off the fuel supply and block the flow of intake air
Relieve all pressure in the fuel system
第2题:
increase the fuel oil temperature
decrease the fuel oil temperature
decrease the fuel oil supply pressure
increase the air supply
第3题:
fuel pump failure
fan motor failure
increased feedwater consumption
decreased boiler efficiency
第4题:
salinity is abnormally high
steam demand is too high
water level is abnormally low
feedwater flow is low
第5题:
Carry out soot blowing if permissible
Change fuel supply to diesel oil
Close steam stop valves on boiler when pressure is reduced
Drain boiler empty when it has cooled down
第6题:
air supply is shut off
fuel supply is shut off
water supply is shut off
safety valve lifts
第7题:
air or water in the furnace
combustion pulses
fuel oil pump failure
flame failure
第8题:
furnace to be re-purged
electric charge to buildup in the igniter
fuel pump to restart
drum level to stabilize
第9题:
fuel treatment
fuel combustion
fuel injection
fuel separating
第10题:
increased fuel consumption
increased feed water consumption
fuel pump failure
combustion control system failure
第11题:
After stopping supplying sludge oil, the value and pipe should be flushed by flushed by diesel oil and the incinerator continue burning for 10 minutes
Close auxiliary burner firstly and then close main burner
After stopping fuel, restoring the position of main fuel supply valve
Stop blower as soon as stopping supplying fuel oil
第12题:
furnace to be re-purged
electric charge to buildup in the igniter
fuel pump to restart
dram level to stabilize
第13题:
fuel oil supply temperature is normal
burner electrode is incorrectly positioned
fuel/air ratio is incorrect
ignition current is too low
第14题:
filter to remove the fuel oil
use the settler to remove the fuel oil
remove the fuel oil by centrifuging
drain and then renew the lube oil supply
第15题:
cool the furnace to prevent pre-ignition
remove explosive vapors from the furnace
evaporate accumulated unburned fuel oil
provide sufficient air in the furnace to allow ignition of the fuel
第16题:
steam demand is high
salinity is high
safety valve simmers
burner flame is extinguished
第17题:
water
voltage
fuel pressure
steam pressure
第18题:
double bottom fuel oil tank temperature
heater supply steam flow
pressure of the fuel supplied to the burners
attemperator steam flow in the heater discharge circuit
第19题:
carbon deposits on the flame scanner
high fuel oil temperature
low fuel oil viscosity
high steam pressure
第20题:
defective solenoid valve
dirty fuel nozzle
grounded high tension lead
faulty ignition cable connector
第21题:
a burned out solenoid in the oil supply valve
high temperature excess air
incorrectly setting the hot-well dump valve
an incorrectly positioned burner snubber realy
第22题:
water in the fuel oil
excessive cycling
high fuel oil pressure
improper burner maintenance
第23题:
incorrect electrode setting
incorrect nozzle position
clogged fuel nozzle
broken high tension lead