niusouti.com

What is the result of issuing the frame－relay map ip 192.168.1.2 202 broadcast command?()A. defines the source IP address that i s used in all broadcast packets on DLCI 202B. defines the DLCI that is used for all packets that are sent to the 192.168.1.2 I

题目
What is the result of issuing the frame－relay map ip 192.168.1.2 202 broadcast command?()

A. defines the source IP address that i s used in all broadcast packets on DLCI 202

B. defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address

C. defines the destination IP address that is used in all broadcast packets on DLCI 202

D. defines the DLCI on which packets from the 192.168.1.2 IP address are received

相似考题

1.在配置命令frame-relay map ip10.1.1.17broadcast中，数字7的含义是()。A.本端逻辑通道编号B.本端DLC编号C.对端接口编号D.对端节点编号

2.在图8-7所示的网络拓扑结构的分支机构路由器上，正确的拨号映射配置语句是(53)。A．dialer map ip 192.168.0.2 name branch MODEM-script. dialout broadcast 2083150B．dialer map ip 192.168.0.2 name center MODEM-script. dialout broadcast 2083703C．dialer map ip 192.168.0.1 name branch MODEM-script. dialout broadcast 2083150D．dialer map ip 192.168.0.1 name center MODEM-script. dialout broadcast 2083703

3.In regard to a hub and spoke Frame－Relay data network, what kind of physical network is it classified as?()A. point-to-pointB. broadcast multi-accessC. nonbroadcast multipointD. nonbroadcast multi-accessE. broadcast point-to-multipoint

4.在配置命令frame-relay map ip 192.168.1.1 dlci 101 broadcast中，数字101的含义是(53)。A．本端逻辑通道编号B．本端数据链路编号C．对端物理接口编号D．对端链路节点编号

更多“What is the result of issuing the frame－relay map ip 192.168.1.2 202 broadcast command?() ”相关问题

  • 第1题：

    Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame－relay map command shown?()

    A.The Seria l0/0interface is passing traffic.

    B.The DLCI 100 was dynamic allyallocated by the router

    C.The Seria l0/0 interf aceacquired the IP address of 172.16.3.1 from a DHCP server

    D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    参考答案：E

  • 第2题：

    什么是发出帧中继映射IP192.168.1.2 202广播命令的结果？（）

    • A、定义了用于所有的广播包的DLCI202的源IP地址
    • B、定义了用于发送到192.168.1.2的IP地址的所有数据包的DLCI
    • C、定义了用于所有的广播包的DLCI202的目的IP地址
    • D、定义了它从192.168.1.2的IP地址的数据包接收的DLCI

    正确答案:B

  • 第3题：

    Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?（）

    • A、Needs to use Inverse ARP.
    • B、Maps a single IP subnet per DLCI.
    • C、Maps a single IP subnet across multiple DLCIs.
    • D、Resolves NBMA (non broadcast multi access) split horizon issues.
    • E、Requires use of the frame-relay map command.
    • F、None of the above

    正确答案:B,D

  • 第4题：

    在配置命令frame-relay map ip 10.1.1.1 dlci 7 broadcast中，数字7含义是（）

    • A、本端逻辑通道编号
    • B、本端DLCI编号
    • C、对端接口编号
    • D、对端节点编号

    正确答案:B

  • 第5题：

    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）

    • A、The Serial0/0 interface is passing traffic.
    • B、The DLCI 100 was dynamically allocated by the router
    • C、The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server
    • D、The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud
    • E、The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

    正确答案:E

  • 第6题：

    What two statistics appear in show frame-relay map output?（）

    • A、The number of FECN packets that are received by the router
    • B、The number of BECN packets that are received by the router.
    • C、The ip address of the local router
    • D、The value of the local DLCI
    • E、The status of the PVC that is configured on the router

    正确答案:D,E

  • 第7题：

    What two statistics appear in show frame-relay map output?（）

    • A、The number of FECN packets that are received by the router
    • B、The number of BECN packets that are received by the router
    • C、The ip address of the local router
    • D、The value of the local DLCI
    • E、The status of the PVC that is configured on the router

    正确答案:D,E

  • 第8题：

    You issued the following statement：   SQL>ALTER DATABASE ENABLE RESUMABLE TIMEOUT n；   What will be the result of issuing the above statement？（）

    • A、The command will not execute successfully because TIMEOUT is an invalid clause with the ALTER DATABASE ENABLE RESUMABLE command.
    • B、 The command will not execute successfully because resumable space allocation is enabled at the session level.
    • C、 The command will execute successfully and resumable space will be allocated at the session level.
    • D、 The command will execute successfully and resumable space will be allocated at the instance level.

    正确答案:B

  • 第9题：

    单选题
    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。
    A

    This command should be executed from the global configuration mode

    B

    The IP address 10.121.16.8 is the local router port used to forward data

    C

    102 is the remote DLCI that will receive the information

    D

    This command is required for all Frame Relay configurations

    E

    The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）
    A

    The Serial0/0 interface is passing traffic.

    B

    The DLCI 100 was dynamically allocated by the router

    C

    The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server

    D

    The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E

    The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    What two statistics appear in show frame-relay map output?（）
    A

    The number of FECN packets that are received by the router

    B

    The number of BECN packets that are received by the router

    C

    The ip address of the local router

    D

    The value of the local DLCI

    E

    The status of the PVC that is configured on the router


    正确答案： A,D
    解析： 暂无解析

  • 第12题：

    单选题
    What are the steps for configuring stateful NBAR for dynamic protocols？ （）
    A

    use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface

    B

    use the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbers

    C

    use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface

    D

    configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. 

    E

    configure video streaming. Configure audio streaming. Attach the codec to an interface


    正确答案： B
    解析： 暂无解析

  • 第13题：

    What two statistics appear in show frame－relay map output?()

    A. The number of FECN packets that are received by the router

    B. The number of BECN packets that are received by the router

    C. The ip address of the local router

    D. The value of the local DLCI

    E. The status of the PVC that is configured on the router


    参考答案：D, E

  • 第14题：

    In regard to a hub and spoke Frame-Relay data network, what kind of physical network is it classified as?（）

    • A、point-to-point
    • B、broadcast multi-access
    • C、nonbroadcast multipoint
    • D、nonbroadcast multi-access
    • E、broadcast point-to-multipoint

    正确答案:D

  • 第15题：

    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）

    • A、This command should be executed from the global configuration mode.
    • B、The IP address 10.121.16.8 is the local router port used to forward data.
    • C、102 is the remote DLCI that will receive the information.
    • D、This command is required for all Frame Relay configurations.
    • E、The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC

    正确答案:E

  • 第16题：

    What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）

    • A、defines the source IP address that is used in all broadcast packets on DLCI 202
    • B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
    • C、defines the destination IP address that is used in all broadcast packets on DLCI 202
    • D、defines the DLCI on which packets from the 192.168.1.2 IP address are received

    正确答案:B

  • 第17题：

    What are the steps for configuring stateful NBAR for dynamic protocols？ （）

    • A、use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface
    • B、use the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbers
    • C、use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface
    • D、configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. 
    • E、configure video streaming. Configure audio streaming. Attach the codec to an interface

    正确答案:D

  • 第18题：

    What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）

    • A、defines the source IP address that i s used in all broadcast packets on DLCI 202
    • B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
    • C、defines the destination IP address that is used in all broadcast packets on DLCI 202
    • D、defines the DLCI on which packets from the 192.168.1.2 IP address are received

    正确答案:B

  • 第19题：

    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。

    • A、This command should be executed from the global configuration mode
    • B、The IP address 10.121.16.8 is the local router port used to forward data
    • C、102 is the remote DLCI that will receive the information
    • D、This command is required for all Frame Relay configurations
    • E、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

    正确答案:E

  • 第20题：

    单选题
    The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）
    A

    This command should be executed from the global configuration mode.

    B

    The IP address 10.121.16.8 is the local router port used to forward data.

    C

    102 is the remote DLCI that will receive the information.

    D

    This command is required for all Frame Relay configurations.

    E

    The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    In order to troubleshoot an issue with the Testking frame relay network, you log into a remote router via a telnet session and issue the command "debug frame-relay lmi". After a long wait, you fail to see any output. What could be the cause of this problem?（）
    A

    The IP addresses are configured incorrectly.

    B

    Frame Relay LMI messages not displayed in real time.

    C

    The administrator must issue the enable frame-relay lmi debug command.

    D

    The administrator must issue the terminal monitor command.

    E

    Debug messages can only be received once through the console port.

    F

    The administrator must issue the show frame-relay lmi vty 0 4 command


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    什么是发出帧中继映射IP192.168.1.2 202广播命令的结果？（）
    A

    定义了用于所有的广播包的DLCI202的源IP地址

    B

    定义了用于发送到192.168.1.2的IP地址的所有数据包的DLCI

    C

    定义了用于所有的广播包的DLCI202的目的IP地址

    D

    定义了它从192.168.1.2的IP地址的数据包接收的DLCI


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?（）
    A

    Needs to use Inverse ARP.

    B

    Maps a single IP subnet per DLCI.

    C

    Maps a single IP subnet across multiple DLCIs.

    D

    Resolves NBMA (non broadcast multi access) split horizon issues.

    E

    Requires use of the frame-relay map command.

    F

    None of the above


    正确答案： D,E
    解析： 暂无解析

  • 第24题：

    多选题
    What two statistics appear in show frame-relay map output？（）
    A

    The number of FECN packets that are received by the router

    B

    The number of BECN packets that are received by the router.

    C

    The ip address of the local router

    D

    The value of the local DLCI

    E

    The status of the PVC that is configured on the router


    正确答案： B,D
    解析： 暂无解析

相关内容