A. Erase flash.
B. Restart the switch.
C. Delete the VLAN database.
D. Erase the running configuration.
E. Erase the startup configuration.
F. Modify the configuration register.
第1题:
A. a straight-through cable
B. an EIA/TIA-232 serial cable
C. an auxiliary cable
D. a modem cable
E. a cross-over cable
第2题:
下述哪种交换机使用模块化的体系结构().
第3题:
A customer with IPCC Express Standard reports that a script using the Database steps is not working. What is the most likely root cause?()
第4题:
You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?()
第5题:
What is the function of the no switchport catalyst switch interface configuration command?()
第6题:
Catalyst switches utilize a special technology to identify and prevent topology loops and ensure that data flows properly through a single network path. What is the name of this technology?()
第7题:
The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch. What must be done to ensure that this new switch becomes the root bridge on the network?()
第8题:
Set the value of ServiceSecurityContext.Current.WindowsIdentity.ImpersonationLevel to TokenlmpersonationLevel.Impersonation
Set the value of ServiceSecurityContext.Current.Windowsldentity.ImpersonationLevel to TokenlmpersonationLevel.Delegation
Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the endpoint element of the configuration file to wsHttpBinding
Set the PnncipalPermissionAttribute on the service contract and update the bindingConfiguration attribute in the endpoint element of the configuration file to wsHttpBinding
第9题:
RAM should be erased and the router restarted.
Flash should be erased and the router restarted.
NVRAM should be erased and the router restarted.
The new configuration should be entered and saved.
第10题:
Lower the bridge priority number.
Change the MAC address of the switch.
Increase the VTP revision number for the domain.
Lower the root path cost on the switch ports.
Assign the switch an IP address with the lowest value.
第11题:
Catalyst 2960 Series
Catalyst 3750 Series
Catalyst 4900 Series
Catalyst 6500 Series
第12题:
Erase flash.
Restart the switch.
Delete the VLAN database.
Erase the running configuration.
Erase the startup configuration.
Modify the configuration register.
第13题:
A.Erase flash.
B.Restart the switch.
C.Delete the VLAN database.
D.Erase the running configuration.
E.Erase the startup configuration.
F.Modify the configuration register.
第14题:
You are at a client site. It is a medium-sized business and needs a Cisco Catalyst switch that offers high availability and security. What type of Catalyst switches would you recommend?()
第15题:
A Catalyst 2950 needs to be reconfigureD.What steps will ensure that the old configuration is erased?()
第16题:
A Catalyst 2950 needs to be reconfigured. What steps will ensure that the old configuration is erased?()
第17题:
The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch.What must be done to ensure that this new switch becomes the root bridge on the network?()
第18题:
What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?()
第19题:
The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing them to connect?()
第20题:
Erase flash.
Restart the switch.
Delete the VLAN database.
Erase the running configuration.
Erase the startup configuration.
Modify the configuration register.
第21题:
C2950#conftC2950(config-iF.#ipaddress192.168.0.1
C2950>enableC2950#ipdefault-gateway192.168.0.1
C2950#conftC2950(config-iF.#ipdefault-gateway192.168.0.1255.255.255.0
C2950#conftC2950(config)#ipdefault-gateway192.168.0.1
第22题:
a straight-through cable
an EIA/TIA-232 serial cable
an auxiliary cable
a modem cable
a cross-over cable
第23题:
AutoQos Enterprise
AutoQoS Campus
AutoQoS VoIP
AutoQoS LAN