niusouti.com

A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）A. The router will use the s

题目

A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）

A. The router will use the static route.

B. The router will use the OSPF route.

C. The route will use the EIGRP route.

D. The router will load balance and use all three routes.

相似考题

1.You can successfully ping a Bridged 1483 customer‘s workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device.What could be causing this problem?()A. incorrect DSL network redistributionB. incorrect static host route configurationC. incorrect static customer route configurationD. incorrect default static route configuration on the end user

2.You have just configured a static default route on router TK1. What is the purpose of a default route?()A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.

3.Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachableD.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24

4.What are two examples of RE exception traffic?()A. BGP updates that travel through the local router and are destined for a remote router.B. OSPF hello packets that are sent from a remote router and are destined for the local router.C. Telnet traffic that is sent from a remote host and is destined for the local router.D. Telnet traffic that travels through the local router and is destined for a remote end host.

参考答案和解析
参考答案：A
更多“A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all ro ”相关问题

  • 第1题：

    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

    A.The router will use the static route.

    B.The router will use the OSPF route.

    C.The router will use the EIGRP route.

    D.The router will load balance and use all three routes.


    参考答案：A

  • 第2题：

    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The router will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第3题：

    A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）

    • A、an OSPF update for network 192.168.0.0/16
    • B、a static router to network 192.168.10.0/24
    • C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
    • D、a RIP update for network 192.168.10.0/24
    • E、a directly connected interface with an address of 192.168.10.254/24
    • F、a default route with a next hop address of 192.168.10.1

    正确答案:E

  • 第4题：

    The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）

    • A、This command sets a gateway of last resort for the TK1 router.
    • B、The number 100 indicates the number of hops to the destination network.
    • C、The interface with IP address 192.168.8.2 is on the TK1 router.
    • D、The command creates a static route for all IP traffic with the source address 192.168.24.64.
    • E、Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.
    • F、None of the above

    正确答案:E

  • 第5题：

    A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。

    • A、a directly connected interface with an address of 192.168.10.254/24
    • B、a static route to network 192.168.10.0/24
    • C、a RIP update for network 192.168.10.0/24
    • D、an OSPF update for network 192.168.0.0/16
    • E、a default route with a next hop address of 192.168.10.1
    • F、a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop

    正确答案:A

  • 第6题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4?（）

    • A、It establishes a static route to the 172.16.3.0 network.
    • B、It establishes a static route to the 192.168.2.0 network.
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.
    • E、It uses the default administrative distance.
    • F、It is a route that would be used last if other routes to the same destination exist.

    正确答案:A,E

  • 第7题：

    You are a systems engineer for your company. Your company has 20，000 users in a large campus environment located in Los Angeles. Each department in the company is located in its own building. Each department has its own IT staff， which is responsible for all network administration within the building.   The company’s network is divided into several IP subnets that are connected to one another by using dedicated routers. Each building on the company’s main campus contains at least one subnet， and possibly up to five subnets. Each building has at least one router. All routers use RIP version 2 （RIPv2） broadcasts.   The company acquires a new business unit located in Denver. The Denver office has 25 users. The network in the Denver office is connected to the network at the main campus by using a leased frame relay connection. The network administrator at the Denver office installs a Windows Server 2003 computer and configures Routing and Remote Access on this server. The network administrator at the Denver office configures this server as a router and implements RIPv2 in Routing and Remote Access.   Later， the Denver administrator reports that his router is not receiving routing table updates from the routers on the main campus network. He must manually add routing entries to the routing table to enable connectivity between the locations. You investigate and discover that the RIPv2 broadcasts are not being received at the Denver office. You also discover that no routing table announcements from the Denver office are being received on the main campus network.  You need to ensure that the network in the Denver office can communicate with the main campus network and can send and receive automatic routing table updates as network conditions change.   What should you do on the router in the Denver office？（）

    • A、 Configure the router to use RIPv1 broadcasts.
    • B、 Configure the router to use auto-static update mode.
    • C、 Add the IP address ranges of the main campus network to the router’s Accept list and Announce list.
    • D、 Add the IP addresses of the main campus routers to the router’s Neighbors list.

    正确答案:D

  • 第8题：

    单选题
    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
    A

    The router will use the static route.

    B

    The router will use the OSPF route.

    C

    The router will use the EIGRP route.

    D

    The router will load balance and use all three routes.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    Your network consists of a single Active Directory domain and two network segments named Subnet1 and Subnet2.You deploy a server named Server1 that runs Routing and Remote Access. Server1 is configured as a router between the two network segments.You deploy a DHCP server on Subnet1. You configure a DHCP scope for each network segment.Client computers that run Windows XP Professional Service Pack 3 (SP3) are deployed on both network segments and are configured to receive IP configurations dynamically.You discover that all client computers on Subnet2 have Automatic Private IP Addressing (APIPA) addresses.You need to ensure that all client computers on Subnet2 receive their IP configurations from the DHCP server.  What should you do in Routing and Remote Access?（）
    A

    Disable IP Routing. 

    B

    Create a static route. 

    C

    Enable demand-dial routing. 

    D

    Enable a DHCP Relay Agent.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
    A

    The router will use the static route.

    B

    The router will use the OSPF route.

    C

    The route will use the EIGRP route.

    D

    The router will load balance and use all three routes.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Which types of prefixes will a router running BGP most likely advertise to an IBGP peer， assuming it is not configured as a route reflector？ （）
    A

     prefixes received from any other BGP peer and prefixes locally originated via network statements or redistributed

    B

     all prefixes in its routing table

    C

     prefixes received from EBGP peers and prefixes locally originated via network statements or redistributed

    D

     prefixes received from EBGP peers and prefixes received from route reflectors

    E

     prefixes received from other IBGP peers， prefixes received from EBGP peers， and prefixes redistributed to BGP

    F

     prefixes received from other IBGP peers and prefixes received from route reflectors


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。
    A

    a directly connected interface with an address of 192.168.10.254/24

    B

    a static route to network 192.168.10.0/24

    C

    a RIP update for network 192.168.10.0/24

    D

    an OSPF update for network 192.168.0.0/16

    E

    a default route with a next hop address of 192.168.10.1

    F

    a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）

    A.

    B.

    C.

    D.


    参考答案：B

  • 第14题：

    You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）

    • A、static route needs to be added
    • B、floating static route needs to be added
    • C、bgp backdoor command
    • D、ospf backdoor command

    正确答案:C

  • 第15题：

    A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The route will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第16题：

    A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）

    • A、an OSPF update for network 192.168.0.0/16
    • B、a static router to network 192.168.10.0/24
    • C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
    • D、a RIP update for network 192.168.10.0/24
    • E、a directly connected interface with an address of 192.168.10.254/24
    • F、a default route with a next hop address of 192.168.10.1

    正确答案:E

  • 第17题：

    Which types of prefixes will a router running BGP most likely advertise to an IBGP peer， assuming it is notconfigured as a route reflector？（）

    • A、prefixes received from any other BGP peer and prefixes locally originated via network statements or redistributed
    • B、all prefixes in its routing table
    • C、prefixes received from EBGP peers and prefixes locally originated via network statements or     redistributed
    • D、prefixes received from EBGP peers and prefixes received from route reflectors
    • E、prefixes received from other IBGP peers， prefixes received from EBGP peers，and prefixes redistributedto BGP
    • F、prefixes received from other IBGP peers and prefixes received from route reflectors

    正确答案:C

  • 第18题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as a network address translation (NAT) router. The server has two network adapters and provides Internet access for the network.You need to prevent traffic on port 21 from being sent to the Internet. All other outbound traffic must be allowed.What should you do?（） 

    • A、On the network adapter that is connected to the LAN, enable TCP/IP filtering. 
    • B、On the network adapter that is connected to the Internet, enable TCP/IP filtering. 
    • C、From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the Services and Ports tab, and define a new service. 
    • D、From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the NAT/Basic Firewall tab, and define a new static packet filter.

    正确答案:D

  • 第19题：

    单选题
    The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）
    A

    This command sets a gateway of last resort for the TK1 router.

    B

    The number 100 indicates the number of hops to the destination network.

    C

    The interface with IP address 192.168.8.2 is on the TK1 router.

    D

    The command creates a static route for all IP traffic with the source address 192.168.24.64.

    E

    Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.

    F

    None of the above


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. The server is configured as a network address translation （NAT） router. The server has two network adapters and provides Internet access for the network. You need to prevent traffic on port 21 from being sent to the Internet. All other outbound traffic must be allowed.  What should you do？（）
    A

    On the network adapter that is connected to the LAN， enable TCP/IP filtering.

    B

    On the network adapter that is connected to the Internet， enable TCP/IP filtering.

    C

    From the Routing and Remote Access snap-in， open the properties of the interface connected to the Internet， select the Services and Ports tab， and define a new service.

    D

    From the Routing and Remote Access snap-in， open the properties of the interface connected to the Internet， select the NAT/Basic Firewall tab， and define a new static packet filter.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network？（）
    A

    an OSPF update for network 192.168.0.0/16

    B

    a static router to network 192.168.10.0/24

    C

    a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop

    D

    a RIP update for network 192.168.10.0/24

    E

    a directly connected interface with an address of 192.168.10.254/24

    F

    a default route with a next hop address of 192.168.10.1


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You can successfully ping a Bridged 1483 customer's workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device. What could be causing this problem?（）
    A

    incorrect DSL network redistribution

    B

    incorrect static host route configuration

    C

    incorrect static customer route configuration

    D

    incorrect default static route configuration on the end user


    正确答案： D
    解析： 暂无解析

  • 第23题：

    多选题
    What are two examples of RE exception traffic?（）
    A

    BGP updates that travel through the local router and are destined for a remote router.

    B

    OSPF hello packets that are sent from a remote router and are destined for the local router.

    C

    Telnet traffic that is sent from a remote host and is destined for the local router.

    D

    Telnet traffic that travels through the local router and is destined for a remote end host.


    正确答案： D,C
    解析： 暂无解析

  • 第24题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）
    A

    an OSPF update for network 192.168.0.0/16

    B

    a static router to network 192.168.10.0/24

    C

    a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop

    D

    a RIP update for network 192.168.10.0/24

    E

    a directly connected interface with an address of 192.168.10.254/24

    F

    a default route with a next hop address of 192.168.10.1


    正确答案： B
    解析： 暂无解析

相关内容