niusouti.com

Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What

题目

Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

A. The redistribution command should be reentered with the match route - type parameter included.

B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

C. The redistribution command should be reentered with the metric metric - value parameter included.

D. Routes will first need to be distributed into another protocol, and then into RIP.

相似考题

1.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

2.Refer to the exhibit. EIGRP has been configured on al l routers in the network. The command metric weights 0 0 1 0 0 has been added to the EIGRP process so that only the delay metric is used in the path calculations. Which router will R1 select as the successor and feasible successor for Network A?（）A. R 4 becomes the successor for Network A and will be placed in the routing table. R2 becomes the feasible successor for Network AB. R4 becomes the successor for Network A and will be included in the routing table. No feasible successor will be selected a s the advertised distance from R2 is higher than the feasible distanceC. R2 becomes the successor and will be placed in the routing table. R4 becomes the feasible successor for Network AD. R2 becomes the successor and will be placed in the routing t able. No feasible successor will be selected as the reported distance from R4 is lower than the feasible distance

3.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

4.Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? ()A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .

更多“Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers ”相关问题

  • 第1题：

    Refer to the exhibit. Two routers are connected by Frame Relay and are running OSPF bet ween them. Each router has been configured with the appropriate network statements under router ospf 1, but the routers are not forming an adjacency. Which of the following three commands could be configured on each router to correct this problem?（）

    A. RouterC(config - if)#ip ospf network broadcast RouterD(config - if)#ip ospf network broadcast

    B. RouterC(config - if)#ip ospf network point - to - point RouterD(config - if)#ip ospf network point - to - point

    C. RouterC(config - router)#neighbor 10.100. 100.4 RouterD(config - router)#neighbor 10.100.100.3

    D. RouterC(config - router)#neighbor 10.255.255.254 RouterD(config - router)#neighbor 10.255.255.253


    参考答案：A, B, D

  • 第2题：

    Refer to the exhibit. The Route.com company is running EIGRP between all the r outers. Currently, if one of the LAN links (LAN1 or LAN2) at the headquarters flaps (goes up and down), the HQRTR1 and HQ - RTR2 routers will experience high CPU usage and have a long EIGRP convergence time. As the new network administrator, you are asked to investigate this situation and determine if there is a quick way to resolve this issue. Which is the most important thing that you can quickly verify first to resolve this issue?（）

    A. Verify that the bandwidth setting on all WAN links is correct.

    B. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured to send only a default route to all the spoke routers.

    C. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured for EIGRP Nonstop Forwarding.

    D. Verify that all the spoke routers are co nfigured for autosummarization.

    E. Verify that all the spoke routers are configured as EIGRP stub.


    参考答案：E

  • 第3题：

    Refer to the exhibit. OSPF is configured on all routers in the network. On the basis of the show ip ospf n eighbor output, what prevents R1 from establishing a full adjacency with R2? ()

    A. Router R1 will only establish full adjacency with the DR and BDR on broadcast multi- access networks.

    B. Router R2 has been elected as a DR for the broadcast multiaccess network in OSPF area 1.

    C. Routers R1 and R2 are configured as stub routers for OSPF area 1 and OSPF area 2.

    D. Router R1 and R2 are configured for a virtual link between OSPF area 1 and OSPF area 2.

    E. The Hello parameters on routers R1 and R2 do not m atch.


    参考答案：A

  • 第4题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第5题：

    Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()

    A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5

    B. None of the BGP updates that are received on router R2 will ever be received by router R5

    C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4

    D. All BGP updates that are received on router R2 will be sent directly to router R5


    参考答案：B

  • 第6题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第7题：

    Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）

    • A、R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
    • B、R1 can send IP packets to R2, but R2 cannot send IP packets to R1
    • C、R2 no longer learns EIGRP routes from R1 for routes not connected to R1
    • D、R1 no longer replies to R2's Query messages
    • E、R2n o longer sends to R1 Query messages

    正确答案:C,E

  • 第8题：

    Routers R1 and R2 use HSRP so that one router will back up the other should there be a failure.   Which two statements are true about the Hot Standby Router Protocol （HSRP）？ （）

    • A、 Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers.  
    • B、 Routers configured for HSRP can belong to multiple groups and multiple VLANs.
    • C、 Load sharing with HSRP is achieved by creating HSRP groups on the HSRP routers.
    • D、 All routers configured for HSRP load balancing must be configured with the same priority.  
    • E、 Routers configured for HSRP must belong to only one group per HSRP interface.

    正确答案:B,C

  • 第9题：

    Ten routers, R1 through R10, connect in a partial mesh over Frame Relay. For the mesh, R1 and R2 have PVCs connected to all other routers, but Routers R3 through R10 act as branch routers, with only two PVCs - one to R1 and one to R2. The routers u se IP subnet 10.1.1.0/24, with addresses 10.1.1.1, 10.1.1.2, and so on, through 10.1.1.10, respectively. The routers all use Inverse ARP to learn Frame Relay mapping information. All routers use a multipoint subinterface with network type point - tomultip oint nonbroadcast. A co - worker's implementation plan lists lots of configuration commands related to this design. The design states that all hosts should be able to ping all other hosts. Which commands are required for proper functioning of OSPF in this case?（）

    • A、frame - relay map commands on R3 - R10 referencing the other routers in this group
    • B、Nine OSPF neighbor commands on each router
    • C、Nine OSPF neighbor commands on R1 and R2, with only two such commands on R3 - R10
    • D、R1 and R2 with ip ospf prio rity 1 commands to ensure they become DR and BDR
    • E、R3 - R10 with ip ospf priority 0 commands to ensure they do not become DR or BDR

    正确答案:A,C

  • 第10题：

    多选题
    Routers R1 and R2 use HSRP so that one router will back up the other should there be a failure.   Which two statements are true about the Hot Standby Router Protocol （HSRP）？ （）
    A

    Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers.

    B

    Routers configured for HSRP can belong to multiple groups and multiple VLANs.

    C

    Load sharing with HSRP is achieved by creating HSRP groups on the HSRP routers.

    D

    All routers configured for HSRP load balancing must be configured with the same priority.

    E

    Routers configured for HSRP must belong to only one group per HSRP interface.


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    A company uses Routers R1 and R2 to connect to ISP1 and ISP2, respectively, with Routers I1 and I2 used at th e ISPs. R1 peers with I1 and R2; R2 peers with I2 and R1. R1 and R2 do not share a common subnet, relying on other routers internal to the Enterprise for IP connectivity between the two routers. Which of the following could be used to prevent potential routing loops in this design?（）
    A

    Using an iBGP mesh inside the Enterprise core

    B

    Configuring default routes in the Enterprise pointing to both R1 and R2

    C

    Redistributing BGP routes into the Enterprise IGP

    D

    Tunneling the packets for the i BGP connection between R1 and R2


    正确答案： A,C
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. In a redundant hub - and - spoke deployment using EIGRP, what feature can be used to ensure that routers C through F are not used as transit routers for data traveling from router B to network 10.1.1.0? Select the best response.（）

    A. Use address summarization at routers C, D, E, and F

    B. Use the EIGRP Stub featu re on routers C, D, E, and F

    C. Use passive - interface on the spoke links in routers A and B

    D. Change the administrative distance in routers A and B for routes learned from routers C, D, E,and F


    参考答案：B

  • 第14题：

    Refer to the exhibit. On the basis of the configuration provided, how are the Hello packets sent by R2 handled by R5 in OSPF area 5?()

    A. The Hello packets will be exchanged and adjacency will be established between routers R2 and R5.

    B. The Hello packets will be exchanged but the routers R2 and R5 will become neighbors only.

    C. The Hello packets will be dropped and no adjacency will be established between routers R2 and R5.

    D. The Hello packets will be dropped but the routers R 2 and R5 will become neighbors.


    参考答案：C

  • 第15题：

    Refer to the exhibit. On the basis of the output, what two conclusions can be reached?()

    A. The default administrative distance has been changed.

    B. IS - IS is not enabled.

    C. Three physical interfaces are taking part in integrated IS - IS.

    D. IS - IS is not redistributing any oth er routing protocols.

    E. There are two neighboring routers sending IS - IS routing information.

    F. Address summarization is configured.


    参考答案：D, E

  • 第16题：

    Refer to the exhibit. Autonomous systems 200 and 300 have EBGP sessions established with their directly connected routers in au tonomous system 100. IGP has been configured on all routers in autonomous system 100 and they successfully exchange routing updates. Traffic originated in autonomous system 200 cannot reach the destination autonomous system 300. What configuration shoul d be done on the routers in autonomous system 100 in order for the traffic coming from autonomous system 200 to be forwarded to autonomous system 300?（）

    A. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned off.

    B. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned on.

    C. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned on.

    D. IBGP session mu st be established between routers R1 and R3, and the synchronization must be turned off.

    E. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned off.

    F. IBGP session must be established between routers R1 and R3, and the synchronization must be turned on.


    参考答案：E

  • 第17题：

    Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

    A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

    B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

    C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

    D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.


    参考答案：C

  • 第18题：

    Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto summariz ation is enabled on routers R2 and R3, but it is disabled on router R1.Which two EIGRP routes will be seen in the routing table of router R3?（）

    A. 10.0.0.0/8

    B. 172.16.10.0/24

    C. 172.16.0.0/24

    D. 10.10.10.0/24

    E. 172.16.0.0/16

    F. 10.10.0.0/16


    参考答案：D, E

  • 第19题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第20题：

    Router R1 and R2 are both configured for HSRP.  Which two statements about the HSRP priorities  of these two routers are true？（）

    • A、 To assign the HSRP router priority in a standby group， the standby group-number priority  priority-value global configuration command must be used.
    • B、 The default priority of a router is zero （0）.
    • C、 The no standby priority command assigns a priority of 100 to the router.
    • D、 Assuming that preempting has also been configured， the router with the lowest priority in an  HSRP group would become the active router.
    • E、 When two routers in an HSRP standby group are configured with identical priorities， the router  with the highest configured IP address will become the active router.

    正确答案:C,E

  • 第21题：

    多选题
    Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem?（）
    A

    All of the routers need to be configured for backbone Area 1.

    B

    R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.

    C

    A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.

    D

    The hello and dead interval timers are not set to the same values on R1 and R3.

    E

    EIGRP is also configured on these routers with a lower administrative distance.

    F

    R1 and R3 are configured in different areas.


    正确答案： B,F
    解析： 暂无解析

  • 第22题：

    单选题
    Routers R1 and R2 are configured for HSRP as shown below：   Router R1：   interface ethernet 0   ip address 20.6.2.1 255.255.255.0   standby 35 ip 20.6.2.21   standby 35 priority 100   interface ethernet 1   ip address 20.6.1.1.2 255.255.255.0   standby 34 ip 20.6.1.21    Router R2：   interface ethernet 0   ip address 20.6.2.2 255.255.255.0   standby 35 ip 20.6.2.21   interface ethernet 1   ip address 20.6.1.1.1 255.255.255.0   standby 34 ip 20.6.1.21  standby 34 priority 100   You have configured the routers R1 & R2 with HSRP. While debugging router R2 you notice very   frequent HSRP group state transitions.  What is the most likely cause of this？ （）
    A

     physical layer issues

    B

     no spanning tree loops

    C

     use of non-default HSRP timers

    D

     failure to set the command standby 35 preempt


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Routers R1 and R2 are configured for HSRP as shown below： Router R1： interface ethernet 0 ip address 20.6.2.1 255.255.255.0 standby 35 ip 20.6.2.21 standby 35 priority 100 interface ethernet 1 ip address 20.6.1.1.2 255.255.255.0 standby 34 ip 20.6.1.21 Router R2： interface ethernet 0 ip address 20.6.2.2 255.255.255.0 standby 35 ip 20.6.2.21 interface ethernet 1 ip address 20.6.1.1.1 255.255.255.0 standby 34 ip 20.6.1.21 standby 34 priority 100 You have configured the routers R1 & R2 with HSRP. While debugging router R2 you notice veryfrequent HSRP group state transitions. What is the most likely cause of this？（）
    A

    physical layer issues

    B

    no spanning tree loops

    C

    use of non-default HSRP timers

    D

    failure to set the command standby 35 preempt


    正确答案： D
    解析： 暂无解析

相关内容