niusouti.com

Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?()A. Router(config-router)# network 192.168.10.0 0.0.0.255 0B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C. Router(config-rou

题目
Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?()

A. Router(config-router)# network 192.168.10.0 0.0.0.255 0

B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0

C. Router(config-router)# network 192.168.10.0 255.255.255.0 area 0

D. Router(config)# router ospf 0

E. Router(config)# router ospf 1

相似考题

1.Routers R1 and R2, OSPF neighbors in area 0 over their Fa0/0 interfaces (respectively), currently both successfully use OSPF MD5 authentication. The OSPF configuration includes the area 0 authentication command under the router ospf 1 command.Which of the following commands must have been configur ed on R1‘s Fa0/0 interface?（）A. ip ospf authentication nullB. ip ospf authentication message - digestC. ip ospf authentication -key whatever- it - isD. ip ospf message - digest - key 1 md5 whatever - it - isE. ip ospf md5 1 key whatever - it - is

2.Which of the following are characteristics of OSPF areas?()A. Hierarchical OSPF networks need to be in one areaB. Multiple OSPF areas must connect to area 0C. Single area OSPF networks must be configured in area 1D. Areas can be assigned any number from 0 to 63535E. Area 0 is called the backbone areaF. Each OSPF area need to be configured with a loopback interface

3.Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()A. A virtual link to area 0.B. OSPF summarization command.C. default - cost extension to the area command.D. no - summary extension to the area stub comm and.E. None of the other alternatives apply

4.When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?()A. OSPF process IDB. OSPF router IDC. OSPF network typeD. OSPF memory usageE. OSPF CPU utilizationF. OSPF stub area configurations

参考答案和解析
参考答案：B, E
更多“Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?() ”相关问题

  • 第1题：

    What OSPF command, when configured, will include all interfaces into area 0?()

    A.network 0.0.0.0 255.255.255.255 area 0

    B.network 0.0.0.0 0.0.0.0 area 0

    C.network 255.255.255.255 0.0.0.0 area 0

    D.network all-interfaces area 0


    参考答案：A

  • 第2题：

    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）

    • A、172.16.0.1/23
    • B、172.16.1.1/26
    • C、172.16.1.1/24
    • D、172.16.0.255/23
    • E、None of the other answers is correct.

    正确答案:A,D

  • 第3题：

    When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?（）

    • A、OSPF process ID
    • B、OSPF router ID
    • C、OSPF network type
    • D、OSPF memory usage
    • E、OSPF CPU utilization
    • F、OSPF stub area configurations

    正确答案:B

  • 第4题：

    What OSPF command, when configured, will include all interfaces into area 0?（）

    • A、network 0.0.0.0 255.255.255.255 area 0
    • B、network 0.0.0.0 0.0.0.0 area 0
    • C、network 255.255.255.255 0.0.0.0 area 0
    • D、network all-interfaces area 0

    正确答案:A

  • 第5题：

    In JUNOS software, which statement is true regarding the OSPF advertisement of the loopback IP address on the ABR?（）

    • A、When Area 0 is active, the loopback interface must be configured in OSPF for it to be advertised.
    • B、When Area 0 is active, the loopback address is automatically advertised into other areas.
    • C、When Area 0 is active, the OSPF router-id must match the loopback address for the loopback address to be advertised.
    • D、When Area 0 is active, the router-id must be configured for the loopback address to be advertised.

    正确答案:A

  • 第6题：

    两台MSR路由器通过OSPF实现动态路由学习，在其中一台路由器MSR-1上有三个接口IP地址分别为192.168.8.1/24、192.168.13.254/24和192.168.29.128/24，那么要通过一条network命令在这三个接口上启动OSPF，下列哪项配置是可行的？（）

    • A、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.255.255
    • B、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.32.255
    • C、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.63.255

    正确答案:A,C

  • 第7题：

    Which of the following are characteristics of OSPF areas?（）

    • A、Hierarchical OSPF networks need to be in one area
    • B、Multiple OSPF areas must connect to area 0
    • C、Single area OSPF networks must be configured in area 1
    • D、Areas can be assigned any number from 0 to 63535
    • E、Area 0 is called the backbone area
    • F、Each OSPF area need to be configured with a loopback interface

    正确答案:B,E

  • 第8题：

    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、Router(config)#router ospf 1
    • B、Router(config)#router ospf 0
    • C、Router(config)#router ospf area 0
    • D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
    • E、Router(config-router)#network 192.168.16.0 0.0.0.255 0
    • F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

    正确答案:A,D

  • 第9题：

    多选题
    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）
    A

    TestKingRouter(config)# router ospf 0

    B

    TestKingRouter(config)# router ospf 1

    C

    TestKingRouter(config)# router ospf area 0

    D

    TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0

    E

    TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0

    F

    TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    多选题
    You want to limit the number of Type 7 LSAs to be converted into Type 5 LSAs at an appropriate ARB. Which two commands should you use from the [edit] hierarchy level within the JUNOS software configuration mode？（）
    A

    set protocols ospf area-range network/mask-length

    B

    set protocols ospf area area-id nssa area-range network/mask-length

    C

    set protocols ospf area area-id area-range network/mask-length restrict

    D

    set protocols ospf area area-id nssa area-range network/mask-length restrict


    正确答案： A,C
    解析： 暂无解析

  • 第11题：

    多选题
    Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）
    A

    Router（config）#router ospf 1

    B

    Router（config）#router ospf 0

    C

    Router（config）#router ospf  area 0

    D

    Router（config-router）#network 192.168.16.0 0.0.0.255 area 0

    E

    Router（config-router）#network 192.168.16.0 0.0.0.255 0

    F

    Router（config-router）#network 192.168.16.0 255.255.255.0 area 0


    正确答案： B,C
    解析： 暂无解析

  • 第12题：

    多选题
    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）
    A

    172.16.0.1/23

    B

    172.16.1.1/26

    C

    172.16.1.1/24

    D

    172.16.0.255/23

    E

    None of the other answers is correct.


    正确答案： C,B
    解析： 暂无解析

  • 第13题：

    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）

    • A、A virtual link to area 0.
    • B、OSPF summarization command.
    • C、default - cost extension to the area command.
    • D、no - summary extension to the area stub comm and.
    • E、None of the other alternatives apply

    正确答案:D

  • 第14题：

    When an OSPF design is planned, which implementation can help a router not have memory resource issues?（）

    • A、Have a backbone area (area 0) with 40 routers and use default routes to reach external destinations
    • B、Have a backbo ne area (area 0) with 4 routers and 30,000 external routes injected into OSPF
    • C、Have less OSPF areas to reduce the need for interarea route summarizations
    • D、Have multiple OSPF processes on each OSPF router. Example, router ospf 1, router ospf 2

    正确答案:A

  • 第15题：

    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、TestKingRouter(config)# router ospf 0
    • B、TestKingRouter(config)# router ospf 1
    • C、TestKingRouter(config)# router ospf area 0
    • D、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0
    • E、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0
    • F、TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0

    正确答案:B,E

  • 第16题：

    Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）

    • A、All OSPF networks require the use of multiple areas
    • B、Multiple OSPF areas must connect to area 0
    • C、Single area OSPF networks must be configured in area 1
    • D、Areas can be assigned any number from 0 to 63535
    • E、Area 0 is called the backbone area
    • F、Each OSPF area need to be configured with a loopback interface

    正确答案:B,E

  • 第17题：

    两台MSR路由器MSR-1和MSR-2通过192.168.1.0/24网段互连。现在需要在路由器MSR-1上配置OSPF协议，与MSR-2正常建立邻接关系，下列哪项配置是可行的？（）

    • A、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.255.255
    • B、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.32.255
    • C、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.15.255
    • D、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.16.00.0.31.255

    正确答案:A,C,D

  • 第18题：

    Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、Router(config)#router ospf 1
    • B、Router(config)#router ospf 0
    • C、Router(config)#router ospf area 0
    • D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
    • E、Router(config-router)#network 192.168.16.0 0.0.0.255 0
    • F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

    正确答案:A,D

  • 第19题：

    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）

    • A、Router(config-router)# network 192.168.10.0 0.0.0.255 0
    • B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
    • C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
    • D、Router(config)# router ospf 0
    • E、Router(config)# router ospf 1

    正确答案:B,E

  • 第20题：

    什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）

    • A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0
    • B、router ospf network 10.1.1.0 0.0.0.255
    • C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0
    • D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0
    • E、router ospf network 10.1.1.0 255.255.255.0 area 0
    • F、router ospf 1 network 10.1.1.0 0.0.0.255

    正确答案:D

  • 第21题：

    多选题
    Which of the following are characteristics of OSPF areas?（）
    A

    Hierarchical OSPF networks need to be in one area

    B

    Multiple OSPF areas must connect to area 0

    C

    Single area OSPF networks must be configured in area 1

    D

    Areas can be assigned any number from 0 to 63535

    E

    Area 0 is called the backbone area

    F

    Each OSPF area need to be configured with a loopback interface


    正确答案： C,F
    解析： 暂无解析

  • 第22题：

    多选题
    Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）
    A

    All OSPF networks require the use of multiple areas

    B

    Multiple OSPF areas must connect to area 0

    C

    Single area OSPF networks must be configured in area 1

    D

    Areas can be assigned any number from 0 to 63535

    E

    Area 0 is called the backbone area

    F

    Each OSPF area need to be configured with a loopback interface


    正确答案： D,B
    解析： 暂无解析

  • 第23题：

    多选题
    Routers R1 and R2, OSPF neighbors in area 0 over their Fa0/0 interfaces (respectively), currently both successfully use OSPF MD5 authentication. The OSPF configuration includes the area 0 authentication command under the router ospf 1 command. Which of the following commands must have been configur ed on R1's Fa0/0 interface?（）
    A

    ip ospf authentication null

    B

    ip ospf authentication message - digest

    C

    ip ospf authentication -key whatever- it - is

    D

    ip ospf message - digest - key 1 md5 whatever - it - is

    E

    ip ospf md5 1 key whatever - it - is


    正确答案： B,E
    解析： 暂无解析

  • 第24题：

    多选题
    You want to limit the number of Type 7 LSAs to be converted into Type 5 LSAs at an appropriateABR. Which two commands should you use from the [edit] hierarchy level within JUNOS configuration mode?（）
    A

    set protocols ospf area-range network/mask-length

    B

    set protocols ospf area area-id nssa area-range network/mask-length

    C

    set protocols ospf area area-id area-range network/mask-length restrict

    D

    set protocols ospf area area-id nssa area-range network/mask-length restrict


    正确答案： C,A
    解析： 暂无解析

相关内容