niusouti.com

Click the Exhibit button.In the exhibit, two physical routers are configured for VRRP in the network with WXC devices.How should you define the default gateway address on each WXC device?()A. Define the virtual router IP address on both WXC devices.B. Add

题目
Click the Exhibit button.In the exhibit, two physical routers are configured for VRRP in the network with WXC devices.How should you define the default gateway address on each WXC device?()

A. Define the virtual router IP address on both WXC devices.

B. Add a static route for the virtual router IP address on both WXC devices.

C. Define the physical IP address of each router on each respective WXC device.

D. Leave the default gateway field in the WXC device blank; it will automatically detect the active gateway address.

相似考题

1.NBDP中气象报告用()表示。A.WRB.WXC.NWD.HW

2.OSI参考模型有哪些层，按顺序()。A.Application、session、transport、network、physical、physical、datalinkB.Application、presentation、session、network、transport、datalink,physicalC.Application、presentation、session、transport、network、datalink、physicalD.Application、session、transport、physical、network、physical、datalink

3.Youworkasanetworkengineerfor.Youstudytheexhibitcarefully.Whathappenswhentheswitch2isconnectedtotherestofthenetworkintheVTPdomainLab_Network?()Exhibit:A.Therecentlyintroducedswitch2removesallconfiguredVLANsthroughouttheVTPdomain.B.Therecentlyintroducedswitch2createsaSTPloopintheVTPdomain.C.Therecentlyintroducedswitch2switchesovertoVTPtransparentmodeinordertobeincludedintotheVTPdomain.D.Atrunkshouldbeconfiguredbetweenthetwoswitchesinordertointegrate2intotheVTPdomain.E.Therecentlyintroducedswitch2addsonemoreVLANtotheVLANdatabaseintheVTPdomain.

4.Linux网关计算机有两个网络接口(eth0和eth1)，每个接口与对应的子网相连接。该计算机/etc/sysconfig,/network文件清单为；NETWORKING=yesFORWARD_IPV4=(6)HOSTNAME=gateway.ABC.com/etc/sysconfig/network-scripts/ifcfg-eth0文件清单为：DEVICE=eth0IPADDR=192.168.1.126NETMASK=(7)……(以下略)/etc/sysconfig/network-scripts/ifcfg-eth1文件清单为：DEVICE=eth1IPADDR=192.168.1.254NETMASK=(8)……(以下略)(6)的备选答案：A．yes B．no C．route D．gateway

更多“Click the Exhibit button.In the exhibit, two physical routers are configured for VRRP in the network with WXC devices.How should you define the default gateway address on each WXC device?() ”相关问题

  • 第1题：

    Exhibit:Exhibit:YouworkasanetworkengineeratCompany.Youstudytheexhibitcarefully.WhichGLBPdevicehostsreceivetheMACaddressassignment?()

    A.R1

    B.R2

    C.TheAVG

    D.TheAVF

    E.Noneoftheotheralternativesapply


    参考答案：D

  • 第2题：

    A vessel towing astern in an operation which severely restricts the towing vessel and her tow in their ability to change course shall，when making way，exhibit ______.

    A.the masthead lights for a towing vessel

    B.the lights for a vessel restricted in its ability to maneuver

    C.sidelights，stern light and towing light

    D.All of the above


    正确答案：D

  • 第3题：

    2、找出照明线路图用图形符号（）。

    A．WL

    B．WX

    C．WP

    D．WV


    A ．WL

  • 第4题：

    As a TestKing trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?()

    A. TestKSwitch(config)# ip route-default 192.168.1.115

    B. TestKSwitch(config)# ip default-gateway 192.168.1.115

    C. TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0

    D. TestKSwitch(config)# ip default-network 192.168.1.115


    参考答案：B

  • 第5题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.100.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.255.0 ip default-gateway 192.168.100.1#B.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.101.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.dhcp pool LAN-POOL-100 ip dhcp excluded-address 192.
    C

  • 第6题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.dhcp pool LAN-POOL-100 ipdhcp excluded-address 192.168.100.1 192.168.100.9 ipdhcp excluded-address 192.168.100.254 network 192.168.100.0 255.255.254.0 default-router 192.168.101.1#B.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp excluded-address 192.168.100.254 ipdhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp exclu
    A. ip route-static

相关内容