niusouti.com

In a PPP over ATM service offering,which command inserts the user's host route into the routing table?()A.ip host-routeB.ip access-routesC.ip dynamic host-routeD.ip route access-routes

题目
In a PPP over ATM service offering,which command inserts the user's host route into the routing table?()

A.ip host-route

B.ip access-routes

C.ip dynamic host-route

D.ip route access-routes

相似考题

1.It takes small steps to create big change and this is()service-learning hopes to achieve.A. whatB. thatC. which

2.Click the Exhibit button.A network administrator receives complaints that the application voicecube is timing out after being idle for 30 minutes.Referring to the exhibit, what is a resolution?()A. [edit] user@host# set applications application voicecube inactivity-timeout neverB. [edit] user@host# set applications application voicecube inactivity-timeout 2C. [edit] user@host# set applications application voicecube destination-port 5060D. [edit] user@host# set security policies from-zone trust to-zone trust policy intrazone then timeout never

3.You want to test a configured screen value prior to deploying.Which statement will allow you to accomplish this?()A. [edit security screen] user@host# show ids-option untrust-screen { alarm-test-only; }B. [edit security screen] user@host# show ids-option untrust-screen { alarm-without-drop; }C. [edit security screen] user@host# show ids-option untrust-screen { alarm-no-drop; }D. [edit security screen] user@host# show ids-option untrust-screen { test-without-drop; }

4.在Mysql的授权表中,不受GRANT和REVOKE语句的影响的权限表是()。A.db权限表B.host权限表C.table_priv权限表D.user权限表

参考答案和解析
更多“In a PPP over ATM service offering,which command inserts the user's host route into the routing table?() ”相关问题

  • 第1题：

    You are required to configure a SCREEN option that enables IP source route option detection.Which twoconfigurations meet this requirement?() (Choose two.)

    A. [edit security screen] user@host# show ids-option protectFromFlood { ip { loose-source-route-option; strict-source-route-option; } }

    B. [edit security screen] user@host# show ids-option protectFromFlood { ip { source-route-option; } }

    C. [edit security screen] user@host# show ids-option protectFromFlood { ip { record-route-option; security-option; } }

    D. [edit security screen] user@host# show ids-option protectFromFlood { ip { strict-source-route-option; record-route-option; } }


    参考答案：A, B

  • 第2题：

    If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）

    A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }

    B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }

    C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }

    D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }


    参考答案：A

  • 第3题：

    You are troubleshooting a routing issue and need to check the hop－by－hop path to the 10.10.10.10 destination. Which three commands would display the path?()

    A. user@router# traceroute 10.10.10.10

    B. user@router> ping record-route 10.10.10.10

    C. user@router>traceroute 10.10.10.10

    D. user@router# run traceroute 10.10.10.10

    E. user@router# ping record-route 10.10.10.10


    参考答案：B, C, D

  • 第4题：

    Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?()

    A. user@host# set chassis cluster cluster-id 1 node 0 reboot

    B. user@host> set chassis cluster id 1 node 0 reboot

    C. user@host> set chassis cluster cluster-id 1 node 0 reboot

    D. user@host# set chassis cluster id 1 node 0 reboot


    参考答案：C

  • 第5题：

    Given the following configuration on the Paris PE router:routing-instance{VPN-A-Paris-Munich{instance-type vrf;interface so-6/0/0.0;interface so-6/0/1.0;route-distinguisher 65535:0;vrf-target target:65535:101;routing-options{static {route 172.16.0.0/16 next-hop so-6/0/0.0;route 172.17.0.0/16 next-hop so-6/0/1.0;}Which community value would the Munich PE router match against in an import policy associated with this VPN?（）

    A. 101

    B. 65535:0

    C. 65535:101

    D. target:65535:101


    参考答案：D

  • 第6题：

    Router R1 has been conf igured with an ipv6 route 2000::／64 S0／0／0 64 command.Which of the following does the 64 at the end of the command represent?()

    A. Metric

    B. Administrative distance

    C. Timeout (seconds)

    D. Prefix length

    E. Interface ID


    参考答案：B

相关内容