niusouti.com

The Dynamic Host Configuration Protocol provides configuration parameters to Intemet （ ）. DHCP consists of two components: a （ ） for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network a

题目

The Dynamic Host Configuration Protocol provides configuration parameters to Intemet （ ）. DHCP consists of two components: a （ ） for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts. DHCP is built on a client-server model, where designated DHCP server hosts allocate network addresses and deliver （ ） parameters to dynamically configured hosts. DHCP supports three mechanisms for IP address allocation. In "automatic allocation", DHCP assigns a （ ） IP address to a client. In "dynamic allocation", DHCP assigns an IP address to a client for a limited period of time. In "manual allocation", a client&39;s IP address is assigned by the network （ ）, and DHCP is used simply to convey the assitped address to the client.

A.switchB.termmalC.hostsD.usersA.routerB.protocolC.hostD.mechanismA.controlB.broadcastC.configurationD.transmissionA.permanentB.dynamicC.cormectionD.sessionA.controllerB.userC.hostD.administrator

相似考题

1.Regarding DHCP (dynamic host configuration protocol), which two of the following choices below are true? (Select two answer choices)A. The DHCP Discover message uses FF-FF-FF-FF-FF as the Layer 2 destination address.B. The DHCP Discover message uses UDP as the transport layer protocol.C. The DHCP Discover message uses a special Layer 2 multicast address as the destination address.D. The DHCP Discover message uses TCP as the transport layer protocol.E. The DHCP Discover message does not use a Layer 2 destination address.F. The DHCP Discover message does not require a transport layer protocol.

2.In a Bridged 1483 network, which set of configuration commands allows the router to forward requests from the PC to an external DHCP server at 3.3.3.3?()A. set dhcp relay 3.3.3.3 set dhcp relay agentB. enable dhcp relay agent set dhcp relay agentC. set dhcp server 3.3.3.3 enable dhcp relay agentD. enable dhcp server 3.3.3.3 enable dhcp relay agent

3.How does the ERX Edge Router interact with an external DHCP server in a Bridged 1483 network?()A.It maintains DHCP leases on behalf of subscribers.B.It initiates DHCP requests on behalf of subscribers.C.It passes DHCP traffic to and from the server;you must configure static host routes.D.It passes DHCP traffic to and from the server and inserts host routes into its routing table.

4.下面的缩写中,哪一个是不准确的()。A.DNS-Dynamic Naming ServiceB.UDP-User Datagram ProtocolC.DHCP-Dynamic Host Configuration ProtocolD.TFTP-Trivial File Transfer Protocol

更多“The Dynamic Host Configuration Protocol provides configuration parameters to Intemet （ ）. DHCP consists of two components: a （ ） for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network a”相关问题

  • 第1题：

    Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

    A. Additional DHCP options will be imported from another DHCP server.

    B. The DHCP server pools need to be bound to an interface to operate.

    C. This configuration will provide IP configuration information to two different su bnets.

    D. Additional DCHP option information needs to be imported from another DHCP server.

    E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.


    参考答案：C

  • 第2题：

    Which two tasks does the Dynamic Host Configuration Protocol perform?()

    A. Set the IP gateway to be used by the network.

    B. Perform host discovery used DHCPDISCOVER message.

    C. Configure IP address parameters from DHCP server to a host.

    D. Provide an easy management of layer 3 devices.

    E. Monitor IP performance using the DHCP server.

    F. Assign and renew IP address from the default pool.


    参考答案：C, F

  • 第3题：

    The Dynamic Host Configuration Protocol provides configuration parameters to Internet（ ）.DHCP consists of two components:a（ ）for delivering host-specifie configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts.DHCP is built on a client-server model,where designated DHCP server hosts allocate network addresses and deliver（ ）parameters to dynamically configured hosts.DHCP supports three mechanisms for IP address allocation.In“automatic allocation”,DHCP assigns a（本题）IP address to client.In“dynamic allocation”,DHCP assigns an IP address to a client for a limited period of time.In“manual allocation”,a client’s IP address is assigned by the network（ ）,and DHCP is used simply to convey the assigned address to the client.

    A.permanent
    B.dynamic
    C.connection
    D.session

    答案：B
    解析：

  • 第4题：

    DHCP是下面哪些英语单词的缩写（）.

    • A、Dynamic Host Configuration Protocol
    • B、Dynamic Host Connection Protocol
    • C、Dynamic Hot Connection Protocol
    • D、Denial Host Configuration Protocol

    正确答案:A

  • 第5题：

    DHCP英文是Dynamic Host Configuration Protocol的简写，那中文是（）

    • A、动态主机协议
    • B、主机配置协议
    • C、动态主机配置协议
    • D、主机动态配置协议

    正确答案:C

  • 第6题：

    Regarding DHCP (dynamic host configuration protocol), which two of the following choices below are true?（）

    • A、The DHCP Discover message uses FF-FF-FF-FF-FF as the Layer 2 destination address.
    • B、The DHCP Discover message uses UDP as the transport layer protocol.
    • C、The DHCP Discover message uses a special Layer 2 multicast address as the destination address.
    • D、The DHCP Discover message uses TCP as the transport layer protocol.
    • E、The DHCP Discover message does not use a Layer 2 destination address.
    • F、The DHCP Discover message does not require a transport layer protocol.

    正确答案:A,B

  • 第7题：

    How does the ERX Edge Router interact with an external DHCP server in a Bridged 1483 network？（）

    • A、It maintains DHCP leases on behalf of subscribers.
    • B、It initiates DHCP requests on behalf of subscribers.
    • C、It passes DHCP traffic to and from the server;you must configure static host routes.
    • D、It passes DHCP traffic to and from the server and inserts host routes into its routing table.

    正确答案:D

  • 第8题：

    In a Bridged 1483 network,which set of configuration commands allows the router to forward requests from the PC to an external DHCP server at 1.1.1.1?（）

    • A、set dhcp relay set dhcp server 1.1.1.1
    • B、set dhcp relay agent set dhcp relay 1.1.1.1
    • C、enable dhcp relay enabled hcp server 1.1.1.1
    • D、enable dhcp relay agent enable dhcp relay 1.1.1.1

    正确答案:B

  • 第9题：

    Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 （SP2）. All client computers run Windows XP Service Pack 3 （SP3）. All client computers are configured as DHCP clients. You change the IP address on DHCP1. Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP addressconfiguration from DHCP1.  What should you do on DHCP1？（）

    • A、Authorize the server.
    • B、Reconcile the scope.
    • C、Enable conflict resolution.
    • D、Restore the server configuration by using the DHCP snap-in.

    正确答案:A

  • 第10题：

    多选题
    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
    A

    IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B

    IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C

    Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.

    D

    Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E

    IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    正确答案： E,A
    解析： 暂无解析

  • 第11题：

    单选题
    DHCP英文是Dynamic Host Configuration Protocol的简写，那中文是（）
    A

    动态主机协议

    B

    主机配置协议

    C

    动态主机配置协议

    D

    主机动态配置协议


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    Regarding DHCP (dynamic host configuration protocol), which two of the following choices below are true?（）
    A

    The DHCP Discover message uses FF-FF-FF-FF-FF as the Layer 2 destination address.

    B

    The DHCP Discover message uses UDP as the transport layer protocol.

    C

    The DHCP Discover message uses a special Layer 2 multicast address as the destination address.

    D

    The DHCP Discover message uses TCP as the transport layer protocol.

    E

    The DHCP Discover message does not use a Layer 2 destination address.

    F

    The DHCP Discover message does not require a transport layer protocol.


    正确答案： F,C
    解析： 暂无解析

  • 第13题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? ()

    A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.

    D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    参考答案：A, C

  • 第14题：

    DHCP是下面哪些英语单词的缩写().

    A.Dynamic Host Configuration Protocol

    B.Dynamic Host Connection Protocol

    C.Dynamic Hot Connection Protocol

    D.Denial Host Configuration Protocol


    参考答案：A

  • 第15题：

    The Dynamic Host Configuration Protocol provides configuration parameters to Internet（ ）.DHCP consists of two components:a（本题）for delivering host-specifie configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts.DHCP is built on a client-server model,where designated DHCP server hosts allocate network addresses and deliver（ ）parameters to dynamically configured hosts.DHCP supports three mechanisms for IP address allocation.In“automatic allocation”,DHCP assigns a（ ）IP address to client.In“dynamic allocation”,DHCP assigns an IP address to a client for a limited period of time.In“manual allocation”,a client’s IP address is assigned by the network（ ）,and DHCP is used simply to convey the assigned address to the client.

    A.router
    B.protocol
    C.host
    D.mechanism

    答案：B
    解析：

  • 第16题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）

    • A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
    • B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
    • C、Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.
    • D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
    • E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

    正确答案:A,C

  • 第17题：

    DHCP代表什么？（）

    • A、Dynamic Host Configuration Protocol 
    • B、Dynamic Hosting Configuration Protocol 
    • C、Dynamlc Host Computer Protocol 
    • D、Dynamic Host Computer Port

    正确答案:A

  • 第18题：

    An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）

    • A、Use SMIT to have the server use DHCP instead of a static address
    • B、Edit /etc/rc.tcpip and start the dhcpsd daemon
    • C、Use the network options command to enable ipforwarding
    • D、Edit /etc/rc.net to set network options back to default

    正确答案:B

  • 第19题：

    In a Bridged 1483 network, which set of configuration commands allows the router to forward requests from the PC to an external DHCP server at 3.3.3.3?（）

    • A、set dhcp relay 3.3.3.3 set dhcp relay agent
    • B、enable dhcp relay agent set dhcp relay agent
    • C、set dhcp server 3.3.3.3 enable dhcp relay agent
    • D、enable dhcp server 3.3.3.3 enable dhcp relay agent

    正确答案:A

  • 第20题：

    Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Service Pack 3 (SP3). All client computers are configured as DHCP clients. You change the IP address on DHCP1. Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP address configuration from DHCP1.  What should you do on DHCP1? （）

    • A、Authorize the server.
    • B、Reconcile the scope.
    • C、Enable conflict resolution.
    • D、Restore the server configuration by using the DHCP snap-in.

    正确答案:A

  • 第21题：

    You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as a DHCP server. You plan to decommission the DHCP service on Server1. You need to move the DHCP server configuration to Server2. The configuration must include all configured scopes, leases, and DHCP options. What should you do first? （）

    • A、From the DHCP snap-in, export list.
    • B、From the DHCP snap-in, back up the server.
    • C、From Windows Explorer, copy the %systemroot%/System32/Dhcp/DHCP.mdb file.
    • D、From Windows Explorer, copy the %systemroot%/System32/Dhcp/backup/dhcpcfg file.

    正确答案:B

  • 第22题：

    多选题
    Oracle Net Configuration Assistant is a post-installation tool that configures basic network components after installation. Which four components are included in the configuration？（）
    A

    Directory server

    B

    Hostname adaptor

    C

    TCP/IP host file

    D

    Connection Manager

    E

    connecting pooling

    F

    external procedures

    G

    listener names and protocol addresses

    H

    Net Service names in a tnsnames.ora file

    I

    naming methods the client uses to resolve connect identifiers


    正确答案： E,G
    解析： 暂无解析

  • 第23题：

    单选题
    DHCP是下面哪些英语单词的缩写（）.
    A

    Dynamic Host Configuration Protocol

    B

    Dynamic Host Connection Protocol

    C

    Dynamic Hot Connection Protocol

    D

    Denial Host Configuration Protocol


    正确答案： B
    解析： 暂无解析

相关内容