niusouti.com

You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on t

题目

You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?

A．Switch(config)# switchport trunk encapsulation isl

B．Switch(config)# switchport trunk encapsulation ietf

C．Switch(config-if)# switchport trunk encapsulation isl

D．Switch(config-if)# switchport trunk encapsulation ietf

E．Switch(config-if)# switchport trunk encapsulation dot1q

相似考题

1.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

2.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

3.Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()A. Switch(config-if)# vlan allB. Switch(config-if)# switchport trunk encapsulation dot1qC. Switch(config-if)# switchport access vlan allD. Switch(config-if)# switchport mode trunkE. Switch(config-if)# switchport access vlan 303

4.You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)A. Switch(vlan) mode trunkB. Switch(config) switchport access mode trunkC. Switch(config-if) switchport mode trunkD. Switch(config-if) switchport trunk encapsulation dot1qE. Switch(config) switchport access mode 1F. Switch(vlan) trunk encapsulation dot1q

更多“You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on t”相关问题

  • 第1题：

    Which commands, when used together, would create an 802.1Q link?()

    A. Switch(vlan)# mode trunk

    B. Switch(config)# switchport access mode trunk

    C. Switch(config-if)# switchport mode trunk

    D. Switch(config-if)# switchport trunk encapsulation dot1q

    E. Switch(config)# switchport access mode 1

    F. Switch(vlan)# trunk encapsulation dot1q


    参考答案：C, D

  • 第2题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method.When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    A. Switch(config)# switchport trunk encapsulation isl

    B. Switch(config)# switchport trunk encapsulation ietf

    C. Switch(config-if)# switchport trunk encapsulation isl

    D. Switch(config-if)# switchport trunk encapsulation ietf

    E. Switch(config-if)# switchport trunk encapsulation dot1q


    参考答案：E

  • 第3题：

    Which commands, when used together, would create an 802.1Q link?（）

    • A、Switch(vlan)# mode trunk
    • B、Switch(config)# switchport access mode trunk
    • C、Switch(config-if)# switchport mode trunk
    • D、Switch(config-if)# switchport trunk encapsulation dot1q
    • E、Switch(config)# switchport access mode 1
    • F、Switch(vlan)# trunk encapsulation dot1q

    正确答案:C,D

  • 第4题：

    You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）

    • A、UplinkFast on the switch port connected to the server
    • B、BackboneFast on the switch port connected to the server
    • C、PortFast on the switch port connected to the workstation
    • D、trunking on the switch

    正确答案:C

  • 第5题：

    You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）

    • A、Reconfigure the dial-up connection to dial-up to a private network.
    • B、Create another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.
    • C、Configure Internet Explorer to automatically detect proxy settings.
    • D、Configure Internet Explorer to dial whenever a network connection is not present.

    正确答案:D

  • 第6题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    • A、Switch(config)# switchport trunk encapsulation isl
    • B、Switch(config)# switchport trunk encapsulation ietf
    • C、Switch(config-if)# switchport trunk encapsulation isl
    • D、Switch(config-if)# switchport trunk encapsulation ietf
    • E、Switch(config-if)# switchport trunk encapsulation dot1q

    正确答案:E

  • 第7题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。

    • A、no VLANs
    • B、all VLANs
    • C、only VLANs 1 - 64
    • D、only the VLANs that are specified when creating the trunk

    正确答案:B

  • 第8题：

    If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1，  which trunk mode  would you set the local port to on R1 if you wanted it to respond to requests from its link partner  （R2） and become a trunk？ （）

    • A、 Auto
    • B、 Negotiate
    • C、 Designate
    • D、 No negotiate

    正确答案:A

  • 第9题：

    单选题
    You use a Windows 2000 Professional portable computer both at the office and at home. In the office you connect the portable computer to a docking station and use Internet Explorer to access the Internet through your LAN connection.  At home, you configure a new dial-up connection to the Internet. Now when you attempt to access the Internet from the office you are prompted to connect via your dial-up connection. When you cancel this message, you can only work offline and cannot access the Internet.  You want to maintain your dial-up connection for home use and your ability to access the Internet when connected to the company LAN. What should you do?（）
    A

    Reconfigure the dial-up connection to dial-up to a private network.

    B

    Create another connection that uses a virtual private network （VPN） to connect a private network though the Internet.

    C

    Configure Internet Explorer to automatically detect proxy settings.

    D

    Configure Internet Explorer to dial whenever a network connection is not present.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You need to configure a new Company switch for trunking.  Which switch command enables a  trunking protocol that appends a four byte CRC to the packet？（）
    A

     CompanySwitch（config-if）#switchport trunk encapsulation dot1q

    B

     CompanySwitch（config-if）#switchport trunk encapsulation itef

    C

     CompanySwitch（config-if）#switchport trunk encapsulation fddi

    D

     CompanySwitch（config-if）#switchport trunk encapsulation isl

    E

     None of the other alternatives apply


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1，  which trunk mode  would you set the local port to on R1 if you wanted it to respond to requests from its link partner  （R2） and become a trunk？ （）
    A

     Auto

    B

     Negotiate

    C

     Designate

    D

     No negotiate


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。
    A

    no VLANs

    B

    all VLANs

    C

    only VLANs 1 - 64

    D

    only the VLANs that are specified when creating the trunk


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）

    A. You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B. You must set the same VTP management domain name on both switches.

    C. You must set all ports on the two switches as access ports.

    D. You must configure one of the switches as a VTP server.

    E. You must use a rollover cable to connect the two switches.


    参考答案：B, D

  • 第14题：

    Refer to the exhibit. Switch port FastEthernet 0/24 on AlSwitch1 will be used to create an IEEE 802.1Q- complaint trunk to another switch. Based on the output shown, What is the reason the trunk does not form, even thought the proper cabling has been attached?（）

    A.VLANs have not been created yet

    B.An IP address must be configured for the port

    C.The port is currently configured for access mode

    D.The correct encapsulation type has not been configured

    E.The no shutdown command has not been entered for the port


    参考答案：C

  • 第15题：

    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?（）

    • A、Switch(config-if)# vlan all
    • B、Switch(config-if)# switchport trunk encapsulation dot1q
    • C、Switch(config-if)# switchport access vlan all
    • D、Switch(config-if)# switchport mode trunk
    • E、Switch(config-if)# switchport access vlan 303

    正确答案:C,D

  • 第16题：

    You need to connect two Company core switches via an ISL trunk.  Which statement is true  regarding the configuration of ISL trunks？ （）

    • A、 A Catalyst switch cannot have ISL and IEEE 802.1q trunks enabled.
    • B、 All Catalyst switches support ISL trunking.
    • C、 A Catalyst switch will report giants if one side is configured for ISL while the other side is not.
    • D、 ISL trunking requires that native VLANs match.
    • E、 None of the other alternatives apply

    正确答案:C

  • 第17题：

    You are configuring an 802.1Q trunk between a Layer 2 switch and a firewall. You read in the documentation that the best way to set up a trunk is to set the port as dynamic desirable. The trunk is not coming up. Which one of these options would be a valid explanation？ （）

    • A、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
    • B、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
    • C、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
    • D、The firewall does not support DTP. You should set the switchport trunk mode to ON

    正确答案:D

  • 第18题：

    You need to configure a new Company switch for trunking.  Which switch command enables a  trunking protocol that appends a four byte CRC to the packet？（）

    • A、 CompanySwitch（config-if）#switchport trunk encapsulation dot1q
    • B、 CompanySwitch（config-if）#switchport trunk encapsulation itef
    • C、 CompanySwitch（config-if）#switchport trunk encapsulation fddi
    • D、 CompanySwitch（config-if）#switchport trunk encapsulation isl
    • E、 None of the other alternatives apply

    正确答案:D

  • 第19题：

    Which of the following is an unlikely reason for the ARP process to fail？（）

    • A、CEF switching is disabled on the switch
    • B、The source device and destination device are in different VLANs
    • C、The VLAN is excluded from the trunk
    • D、The host is connected to the switch through an IP phone
    • E、A faulty cable from host to switch or between switches
    • F、The trunking encapsulation type is inconsistent on the two ends of the link

    正确答案:A,D

  • 第20题：

    You use a Windows 2000 Professional portable computer both at the office and at home. In the office you connect the portable computer to a docking station and use Internet Explorer to access the Internet through your LAN connection.  At home, you configure a new dial-up connection to the Internet. Now when you attempt to access the Internet from the office you are prompted to connect via your dial-up connection. When you cancel this message, you can only work offline and cannot access the Internet.  You want to maintain your dial-up connection for home use and your ability to access the Internet when connected to the company LAN. What should you do?（）

    • A、Reconfigure the dial-up connection to dial-up to a private network.
    • B、Create another connection that uses a virtual private network （VPN） to connect a private network though the Internet.
    • C、Configure Internet Explorer to automatically detect proxy settings.
    • D、Configure Internet Explorer to dial whenever a network connection is not present.

    正确答案:D

  • 第21题：

    单选题
    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）
    A

    Switch(config)# switchport trunk encapsulation isl

    B

    Switch(config)# switchport trunk encapsulation ietf

    C

    Switch(config-if)# switchport trunk encapsulation isl

    D

    Switch(config-if)# switchport trunk encapsulation ietf

    E

    Switch(config-if)# switchport trunk encapsulation dot1q


    正确答案： A
    解析： 暂无解析

  • 第22题：

    多选题
    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）
    A

    You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B

    You must set the same VTP management domain name on both switches.

    C

    You must set all ports on the two switches as access ports.

    D

    You must configure one of the switches as a VTP server.

    E

    You must use a rollover cable to connect the two switches.


    正确答案： E,D
    解析： 暂无解析

  • 第23题：

    单选题
    You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）
    A

    Reconfigure the dial-up connection to dial-up to a private network.

    B

    Create another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.

    C

    Configure Internet Explorer to automatically detect proxy settings.

    D

    Configure Internet Explorer to dial whenever a network connection is not present.


    正确答案： B
    解析： 暂无解析

相关内容