niusouti.com

You need to perform. some initial configuration tasks on a new Ezonexam switch. What is the purpose of assigning an IP address to a switch?A．To provide local hosts with a default gateway addressB．To allow remote management of the switch.C．To allow the swi

题目

You need to perform. some initial configuration tasks on a new Ezonexam switch. What is the purpose of assigning an IP address to a switch?

A．To provide local hosts with a default gateway address

B．To allow remote management of the switch.

C．To allow the switch to respond to ARP requests between two hosts

D．To ensure that hosts on the same LAN can communicate with each other.

E．None of the above

相似考题

1.As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?A．TestKSwitch(config)# ip route-default 192.168.1.115B．TestKSwitch(config)# ip default-gateway 192.168.1.115C．TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0D．TestKSwitch(config)# ip default-network 192.168.1.115E．None of the above

2.The network administrator has configured port security on a Ezonexam switch. Why would a network administrator configure port security on this Ezonexam device?A．To prevent unauthorized hosts from getting access to the LANB．To limit the number of Layer 2 broadcasts on a particular switch portC．To prevent unauthorized Telnet or SSH access to a switch portD．To prevent the IP and MAC address of the switch and associated portsE．None of the above

3.Why might the Ezonexam network administrator set the configuration register to 0x2142 on a 2600 series Cisco router?A．To boot the IOS from ROMB．To reset the console passwordC．To upload a new version of the configuration fileD．To upload a new version of the IOSE．To allow a new memory upgrade to be recognized by the router

4.You need to decide on which trunking method to implement in the Ezonexam network. What is a characteristic of ISL and 802.1q frame. tagging in a switched LAN environment?A．They are used to find the best path through a network.B．They allow the exchange of filtering tables.C．They specify different implementations of the Spanning-Tree Protocol.D．They allow the exchange of routing tablesE．They provide inter-switch VLAN communication.

更多“You need to perform. some initial configuration tasks on a new Ezonexam switch. What is the purpose of assigning an IP address to a switch?A．To provide local hosts with a default gateway addressB．To allow remote management of the switch.C．To allow the swi”相关问题

  • 第1题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)

    A. The EZONEXAM VLAN must be created.

    B. The desired ports must be added to the new EZONEXAM VLAN.

    C. The EZONEXAM VLAN must be added to all of the domains.

    D. The EZONEXAM VLAN must be named.

    E. An IP address must be configured for the EZONEXAM VLAN.

    F. None of the above. VLAN creations are automatic.


    正确答案：ABD
    A,B,D 解析：Explanation:
    Creating a VLAN is done in 3 steps:
    1. Create the VLAN
    2. Name the VLAN
    3. Assign ports to the VLAN

    From there, other features and functionality can be configured, but these are the only steps that are required for the addition of a VLAN.

    Incorrect Answers:
    C. The VLAN needs only to be added to a single switch, where it can act as a stand-alone VLAN, or it can be transferred to other switches in the network through the use of the VTP protocol.

    E. VLANs operate at layer 2, and although many are configured with a layer 3 IP address, it is not absolutely necessary to do this.

  • 第2题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    A. The switch name must match the workgroup name of the local network.

    B. The switch must be configured with an IP address and default gateway.

    C. The remote workstations must have access to the management VLAN of the switch.

    D. CDP must be enabled on the switch so that it can be located by other devices on the network.


    参考答案：B, C

  • 第3题：

    You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()

    A. Switch(config)# ip default-network 192.168.12.1

    B. Switch(config)#ip route-default 192.168.12.1

    C. Switch(config)# ip default-gateway 192.168.12.1

    D. Swicth(config)# ip route 192.168.12.1 0.0.0.0


    参考答案：C

  • 第4题：

    Refer to the exhibit.The network administrator normally establishes a telnet session with the switch from host A.However,host A is unavailable.The administrator′s attempt to the switch from host B fails,but pings to the other two hosts are successful.what is the issue?（）

    A.Host B and the switch need to be in the same subnet.

    B.The switch needs and appropriate default gateway assigned.

    C.The switch interface connected to the router is down.

    D.Host B need to be assigned an IP address in vlan 1.

    E.The switch interfaces need the appropriate IP addresses assigned.


    参考答案：B

  • 第5题：

    What is the purpose of limber holes ________．

    A.To allow for air circulation

    B.To allow for stress and strain in rough waters

    C.To allow water in the boat to drain overboard

    D.To allow water in the bilge to get to the boat drain


    正确答案：D

  • 第6题：

    Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。

    • A、a switch with a trunk link that is configured between the switches
    • B、a router with an IP address on the physical interface that is connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a router with subinterfaces configured on the physical interface that is connected to the switch

    正确答案:D

  • 第7题：

    You install three servers that run Windows Server 2003 Service Pack 2 (SP2). The servers are on the same subnet.You get the IP configuration for the servers as shown in the following table. You need to ensure that you can establish communication between the three servers. What should you do?（）

    • A、Modify the IP address on Server3. 
    • B、Modify the IP address on Server1. 
    • C、Configure the hosts file on each server. 
    • D、Modify the default gateway for each server. 

    正确答案:A

  • 第8题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第9题：

    What is the purpose of assigning an IP address to a switch?（）

    • A、Provides local hosts with a default gateway address
    • B、Allows remote management of the switch.
    • C、Allows the switch to respond to ARP requests between two hosts
    • D、Ensures that hosts on the same LAN can communicate with each other.

    正确答案:B

  • 第10题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第11题：

    You need to configure Microsoft Windows Firewall to allow technicians to remotely control your computer.  Which exception should you enable？ （）

    • A、Remote Registry Service
    • B、Remote Assistance
    • C、Remote Administration
    • D、Remote Service Management

    正确答案:B

  • 第12题：

    单选题
    You install three servers that run Windows Server 2003 Service Pack 2 (SP2). The servers are on the same subnet.You get the IP configuration for the servers as shown in the following table.  You need to ensure that you can establish communication between the three servers.  What should you do?（）
    A

     Modify the IP address on Server3. 

    B

     Modify the IP address on Server1. 

    C

     Configure the hosts file on each server. 

    D

     Modify the default gateway for each server.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A technician is troubleshooting a network connectivity issue with a user‘s desktop configured touse a static IP address. The technician notes the following configuration:Which of the following changes will allow the desktop to communicate properly with remote networks?（）

    A. Changing the DNS to 172.16.1.100

    B. Changing the WINS server to 172.174.136

    C. Changing the netmask to 255.255.255.0

    D. Changing the default gateway to 172.16.3.1


    参考答案：D

  • 第14题：

    In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?()

    A. Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.

    B. A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.

    C. A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.

    D. A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.


    参考答案：B

  • 第15题：

    Which two tasks does the Dynamic Host Configuration Protocol perform?()

    A. Set the IP gateway to be used by the network.

    B. Perform host discovery used DHCPDISCOVER message.

    C. Configure IP address parameters from DHCP server to a host.

    D. Provide an easy management of layer 3 devices.

    E. Monitor IP performance using the DHCP server.

    F. Assign and renew IP address from the default pool.


    参考答案：C, F

  • 第16题：

    What is the purpose of the inverse ARP?()

    A.to map a known DLCI to an IP address

    B.to mapa known IP address to a MAC address

    C.to map known SPID toa MAC address

    D.to map a known DLCI to a MAC address

    E.to map a known IP address to a SPID

    F.to mapa known MAC address to an IP address


    参考答案：A

  • 第17题：

    You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?（）

    • A、Switch(config)# ip default-network 192.168.12.1
    • B、Switch(config)#ip route-default 192.168.12.1
    • C、Switch(config)# ip default-gateway 192.168.12.1
    • D、Swicth(config)# ip route 192.168.12.1 0.0.0.0

    正确答案:C

  • 第18题：

    You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）

    • A、UplinkFast on the switch port connected to the server
    • B、BackboneFast on the switch port connected to the server
    • C、PortFast on the switch port connected to the workstation
    • D、trunking on the switch

    正确答案:C

  • 第19题：

    What TCP/IP stack configuration features can DHCP provide, in addition to assigning an IP address? (Choose three.)（）

    • A、default gateway
    • B、DNS servers
    • C、FTP server
    • D、helper address
    • E、subnet mask
    • F、TFTP server

    正确答案:A,B,E

  • 第20题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）

    • A、The switch must be configured with an IP address, subnet mask, and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch

    正确答案:A,C

  • 第21题：

    What is the purpose of the cisco Vlan Trunking protocol?（）

    • A、to provide a mechanism to dynamically assign vlan membership to switch ports
    • B、to allow traffic to be carried from multiple vlans over a single link between switches
    • C、to allow native vlan information to be carried over a trunk link
    • D、to provide a mechanism to manually assign vlan membership to switch ports
    • E、to allow for managing the additions,deletions,and changes of vlans between switchs

    正确答案:E

  • 第22题：

    You are the administrator of Company.com’s Windows 2000 Network.  Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer.   You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

    • A、Configure a HOSTS file.
    • B、Configure a LMHOSTS file.
    • C、Configure a WINS server database.
    • D、Configure a DHCP server address.
    • E、Configure at least one DNS address.

    正确答案:A,E

  • 第23题：

    单选题
    Refer to the exhibit.The network administrator normally establishes a telnet session with the switch from host A.However,host A is unavailable.The administrator′s attempt to the switch from host B fails,but pings to the other two hosts are successful.what is the issue?（）
    A

    Host B and the switch need to be in the same subnet.

    B

    The switch needs and appropriate default gateway assigned.

    C

    The switch interface connected to the router is down.

    D

    Host B need to be assigned an IP address in vlan 1.

    E

    The switch interfaces need the appropriate IP addresses assigned.


    正确答案： B
    解析： 暂无解析

相关内容