niusouti.com

The Ezonexam network administrator needs to verify that switch interface 0/5 has been assigned to the Marketing VLA.N. Which command will accomplish this task?A. Show vlanB. Show mac-address-tableC. Show vtp statusD. show spanning-tree rootE. show ip inte

题目

The Ezonexam network administrator needs to verify that switch interface 0/5 has been assigned to the Marketing VLA.N. Which command will accomplish this task?

A. Show vlan

B. Show mac-address-table

C. Show vtp status

D. show spanning-tree root

E. show ip interface brief

F. None of the above

相似考题

1.How long() you() a member of the club?A.have,,joinedB.have,,beenC.has,,joinedD.has,,been

2.Switch1的f0/24口接在Switch 0的f0/2口上，请根据本题的示意图完成或解释以下 Switch0的配置命令。Switch0(config) interface(8)(进入虚子接口)Switch0(config-if) ip address 203.12.12.1 255.255.255.0(加IP地址)Switch0(config-if) no shutdown(9)Switch0(config-if) standby 1 ip 203.12.12.253(建HSRP组并设虚IP地址)Switch0(config-if) standby 1 priority 110(10)Switch0(config-if) standby 1 preempt(11)

3.In a Bridged 1483 network, which set of commands is used to configure an ATM sub－interface?()A. interface atm 6/0.33 atm pvc 33 0 33 aal5snap ip description Company-XYZ encapsulation bridge1483 ip address unnumbered loopback0B. interface atm 6/0.33 atm pvc 33 0 33 aal5snap ip description Company-XYZ encapsulation bridge1483 ip unnumbered loopback0C. interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip description Company-XYZ ip address unnumbered loopback0D. interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip description Company-XYZ ip unnumbered loopback0

4.Why()the old block of flats()demolished next month?A、are…beingB、is…beingC、has…beenD、have…been

更多“The Ezonexam network administrator needs to verify that switch interface 0／5 has been assi ”相关问题

  • 第1题：

    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router‘s Fa0/0 interface.Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）

    A. 172.16.0.1/23

    B. 172.16.1.1/26

    C. 172.16.1.1/24

    D. 172.16.0.255/23

    E. None of the other answers is correct.


    参考答案：A, D

  • 第2题：

    Followingticketconsistsofaproblemdescriptionandexistingconfigurationonthedevice.

    Figure1

    Figure2

    TroubleTicketStatement

    Client1isnotabletoreachtheWebServer.InitialtroubleshootingshowsthatDSW1canpingtheFa0/1interfaceofR4butnotthes0/0/0/0.34interface.

    ConfigurationonDSW1

    routereigrp10

    network10.1.4.40.0.0.0

    network10.2.1.10.0.0.0

    network10.2.4.130.0.0.0

    noauto-summary

    ConfigurationonDSW2

    routereigrp10

    network10.1.4.80.0.0.0

    network10.2.2.10.0.0.0

    network10.2.4.140.0.0.0

    noauto-summary

    ConfigurationonR4

    routereigrp10

    network10.1.4.50.0.0.0

    noauto-summary

    redistributeospf1metric1001025511500route-mapEIGRP_to_OSPF!

    routerospf1

    network10.1.1.80.0.0.0area34

    redistributeeigrp10subnets!

    route-mapEIGRP→OSPF

    matchipaddress1!

    access-list1permit10.0.0.00.255.255.255

    access-list1permit209.0.0.00.255.255.255

    Whatisthesolutionofthefaultcondition？（）


    参考答案：B

  • 第3题：

    Usetheoutputfromtheroutershowninthegraphicabovetodeterminewhichofthefollowingarecorrect.()

    A.Router John uses alink-state routing protocol.

    B.Router John will receive routing updates on the Serial0/0 interface.

    C.Router John will receive routing updates on the Serial0/1 interface.

    D.Router John will send routing updates out the Serial0/0 interface.

    E.Router John will send routing updates out the FastEthernet0/0 interface.

    F.Router John will send routing updates out the Serial0/1 interface.


    参考答案：B, D

  • 第4题：

    Asanetworkengineer,studytheexhibitcarefully.RouterNetisunabletoestablishanADSLconnectionwithitsprovider.Whichactionwouldcorrectthisproblem?()

    A.OntheDialer0interface，addthepppoeenablecommand

    B.OntheDialer0Interface，addtheipmtu1496command

    C.OntheATM0/0interface，addthedialerpool-member1command

    D.OntheATM0/0interface，addthedialerpool-member0command


    参考答案：C

  • 第5题：

    Refertotheexhibit.Thiscommandisexecutedon2960Switch:2960Switch(config)mac－address－tablestatic0000.00aa.aaaavlan10interfacefa0／1Whichtwoofthesestatementscorrectlyidentifyresultsofexecutingthecommand?()

    A.Portsecurityisimplementedonthefa0/1interface.

    B.MACaddress0000.00aa.aaaadoesnotneedtobelearnedbythisswitch.

    C.OnlyMACaddress0000.00aa.aaaacansourceframesonthefa0/1segment.

    D.FrameswithaLayer2sourceaddressof0000.00aa.aaaawillbeforwardedoutfa0/1.

    E.MACaddress0000.00aa.aaaawillbelistedintheMACaddresstableforinterfacefa0/1only.


    参考答案：B, E

  • 第6题：

    阅读下列说明，一回答问题1至问题2，将解答填入答题纸的对应栏内。【说明】图4-1是某学校的的网络拓扑图，运营商分配的公网IP地址为113.201.60.1/29，运营商的网关地址为 113.201.60.1，内部用户通过路由器代理代理上网，代理地址为113.201.60.2.核心交换机配置基于全局的DHCP服务，为办公楼和宿舍楼用户提供DHCP服务。内部网络划分为3个Vlan，其中vlan 10的地 址是10.0.10.1/24，vlan20的地址是10.0.20.1/24，vlan 30的地址是10.0.30.1/24.结合案例，回答下列问题。



    问题一；路由器的配置片段如下，根据图4- 1，补齐(1) ~(6) 空缺 的命令system-view Huawei] sysname（ 1）
    [Router] interface（ 2 ）
    [Router-GigabitEthernet1/0/0] ip address(3)
    [Router-GigabitEthernet1/0/0] quit
    [Router] ip route-static 0.0.0.0 0.0.0.0（ 4 ）
    [Router-acI-basic-2000]
    [Router-acI-basic-2000] rule 5 permit source 10.0.0.0（ 5 ）
    [Router-acl-basic-2000] quit
    [Router] interface GigabitEthernet1/0/0
    [Router-GigabitEthernet1/0/0] nat outbound（6 ）
    [Router-GigabitEthernet1/0/0] quit
    ……
    其他配置略
    问题二：核心交换机的配置片段如下，根据图 4-1，补齐 (7)~(10) 空缺的命令。#配置GE0/0/2接口加入VLAN20，并配置对应VLAN接口地址
    [Switch]vlan batch 20[Switch]interface GigabitEthernet0/0/2[Switch-GigabitEthernet0/0/2]port link-type( 7 )[Switch-GigabitEthernet0/0/2]port hybrid pvid vlan20[Switch-GigabitEthernet0/0/2]port hybrid untagged vlan20[Switch-GigabitEthernet0/0/2]quit[Switch] interface vlanif 20[Switch-Vlanif20] ip address( 8 )[Switch-Vlanif20]Quit.......其他配置略

    #配置DHCP服务，租期3天

    [Switch] dhcp(9 )
    [Switch] ip pool pool1
    [Switch-ip-pool-pool1] network 10.0.20.0 mask 225.225.255.0
    [Switch-ip-pool-pool1] dns-list 10.010.2
    [Switch-ip-pool-pool1] gateway-list 10.0.20.1
    [Switch-ip-pool-pool1] lesae day( 10 )
    [Switch-ip-pool-pool1] quit
    [Switch] interface vlanif 20
    [Switch-Vlanif20] dhcp select global
    [Switch-Vlanif20] quit
    ......
    其他配置略


    答案：
    解析：
    （1）Router （2）GigabitEthernet 1/0/0
    （3）113.201.60.2 255.255.255.248 （4）113.201.60.1 （5）0.255.255.255
    （6）2000 （7）hybrid （8）10.0.20.1 255.255.255.0 （9）enable （10）3

相关内容