A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）A、VLANB、zoningC、trunki

第1题：

A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）

• A、 OSPF
• B、 RIP
• C、 FSPF
• D、 VSANs

第2题：

Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

• A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
• B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
• C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
• D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

第3题：

A customer has installed an IBM System Storage DS8700 with 20 TB of storage， two-way processor version， 32 GB cache， and 16 Fibre Channel ports. The customer is beginning to experience throughput performance issues.  To address this performance consideration with minimal cost to the customer， which of the following should be the FIRST step to resolve the problem（）

• A、add an expansion frame with additionalFibre Channel ports
• B、increase the amount of storage by 20 TB
• C、conduct a Disk Magic study to identify the source of the performance issue
• D、add additionalFibre Channel ports to the existing DS8700

第4题：

A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

• A、Dual power supplies.
• B、Twice the amount of disk.
• C、Two dual-port LHEA adapters.
• D、Two dual-port fibre channel adapters.

第5题：

A customer has installed an IBM System Storage DS8700 with 20 TB of storage, 32 GB cache, and 16 Fibre Channel ports. The customer is beginning to experience throughput performance issues since they have added new workloads. The customer asks the storage specialist for guidance. Which of the following actions should be recommended as a first step?（）

• A、install the Performance Accelerator feature
• B、review the DS Storage Manager Major Event Log (MEL)
• C、add an expansion frame with additionalFibre Channel ports
• D、review the latest TPC for Disk study to identify the source of the performance issue

第6题：

An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）

• A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?
• B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?
• C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?
• D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?

第7题：

A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）

• A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules
• B、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules
• C、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules
• D、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules

第8题：

A customer has six Windows 2003 servers， three RedHat Linux servers， and three Netware servers.  The current environment is direct attached storage.  The customer needs a 2Gb Fibre solution that can scale up to 64 partitions over the next three years and provide connectivity to all three platforms.  The customer also needs a fibre attached backup solution.  Which of the following solutions has the best combination of price and performance？（）

• A、A DS4300 Turbo with Fibre Attached Tape Library
• B、A DS4500 with EXP700’s and Fibre Attached Tape Library
• C、A DS4500 with EXP710’s and Fibre Attached Tape Library
• D、A DS4300 with Additional EXP710’s and a SCSI Attached Tape Library

第9题：

第10题：

第11题：

第12题：

A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）

• A、OSPF
• B、RIP
• C、FSPF
• D、VSANs

第13题：

A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory， four 10/100/1000 TX LAN adapters， and six fibre channel adapters to external storage in an IBM ESS （Shark）.  They like the idea of being able to do SAN maintenance while not incurring downtime.  If all LPARs are production related and similar， which question is most appropriate for the pSeries technical specialist to ask？（）

• A、Would 10/100 Ethernets work as well？
• B、Should there be eight fibre channel adapters？
• C、Should there be an async adapter for heartbeat？
• D、Will all LPARs need access to a common fibre channel tape drive？

第14题：

What types of host connectivity are available on the Storwize V7000?（）

• A、Fibre Channel and SAS 
• B、Fibre Channel and iSCSI 
• C、Fibre Channel, iSCSI and SAS 
• D、Fibre Channel, iSCSI and InfiniBand 

第15题：

A customer is ready to order a pSeries solution.  However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option.  What is the most appropriate action for the specialist to take next？（）

• A、Ask the customer to confirm which option is best for their environment.
• B、Order the fibre channel option and purchase a converter later if necessary.
• C、Order both SCSI and fibre channel adapters to cover both potential options.
• D、Inform the customer that fibre channel was selected for performance reasons.

第16题：

A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

• A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
• B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
• C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
• D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

第17题：

A customer has Windows servers and applications that use block I/O. The customer cannot affordthe cost of a fibre channel infrastructure but still requires shared storage. Which configurationmeets these requirements at the lowest cost？（）

• A、iSCSI HBAs and N3400
• B、MicrosoftiSCSI initiator and N3400
• C、MicrosoftiSCSI initiator and DS3400
• D、SAN04B-R multi-protocol router and DS3400

第18题：

Which IBM tape interface architecture has the best performance and distance characteristics? （）

• A、SAS
• B、SCSI
• C、ESCON
• D、Fibre Channel

第19题：

A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

• A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
• B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
• C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
• D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

第20题：

第21题：

第22题：