niusouti.com

单选题A manufacturing customer has a requirement to add 12 additional dual-attached servers to theirexisting two Brocade 16 port SAN switches that have no more ports available. Which of thefollowing should be recommended to accommodate the current capacity r

题目
单选题
A manufacturing customer has a requirement to add 12 additional dual-attached servers to theirexisting two Brocade 16 port SAN switches that have no more ports available. Which of thefollowing should be recommended to accommodate the current capacity requirements, allow forfuture growth and provide 8 and 4 Gb support?（）
A

two SAN16B 

B

two SAN80B-4 

C

two SAN24B-4 

D

two SAN04B-R

相似考题

1.Two file servers have run out of local disk space. The internal drives are at capacity and the company has traditionally only used local disks for storage. Which of the following is the MOST cost effective solution to add storage to both servers?（）A. Install fiber cards into the servers and add direct attached storage.B. Install fiber cards into the servers and implement a SAN solution.C. Attach a USB drive to one of the servers.D. Add a NAS to the environment

2. A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A、4B、3C、2D、8

3.A company needs to connect seven of their Windows-based servers to a DS4000 storage server.   The DS4000 only has two host-side connections， and each server has two HBAs.  Which of the following is the lowest cost solution to provide no single points of failure？（）A、Implement two 8-port switches design with ISLsB、Implement two 16-port switches design with ISLsC、Implement two 8-port switches design without ISLsD、Implement two 16-port switches design without ISLs

4.A customer has an existing high availability SAN environment with CLARiiON, which has been stable for 16 months. They have recently experienced several outages with their current storage systems. They need to purchase additional storage and have asked about tier 1 storage. They are concerned with connecting their existing storage and servers without trouble.Which resource should be consulted while developing the solution options?（）A. Disk MagicB. TPC for DataC. CLARiiON Procedure GeneratorD. System Storage Interoperability Center

更多“单选题A manufacturing customer has a requirement to add 12 additional dual-attached servers to theirexisting two Brocade 16 port SAN switches that have no more ports available. Which of thefollowing should be recommended to accommodate the current capacity r”相关问题

  • 第1题：

    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）  

    • A、 A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 
    • B、 SAN port channels can include up to 16 interfaces.
    • C、 SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
    • D、 The links in SAN port channels can be connected to different sets of switches.
    • E、 The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.

    正确答案:E

  • 第2题：

    The customer has both a Windows SAN and a separate UNIX SAN. Each of these is managed bya different group. The UNIX group has a need for more resources and no available funding. Whatis the first question the storage specialist should ask?（）

    • A、What is the SAN topology? 
    • B、Which vendor's storage product do you use? 
    • C、Are there additional storage resources available in the Windows SAN? 
    • D、Are there additional switch ports available in both the Windows and UNIX SANs?

    正确答案:C

  • 第3题：

    A customer server has the maximum local storage installed. The customer plans to share this new storage with other servers. Which of the following provides that server additional storage？（）

    • A、Add External Storage via EXP3000
    • B、Replace current storage with more dense drives
    • C、Add External Storage via SAN
    • D、Add storage expansion blade

    正确答案:C

  • 第4题：

    A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

    • A、Dual power supplies.
    • B、Twice the amount of disk.
    • C、Two dual-port LHEA adapters.
    • D、Two dual-port fibre channel adapters.

    正确答案:A

  • 第5题：

    A customer’s new rack contains 12 x p655 servers.   The customer currently has an HMC with one 128-port async adapter with a rack mounted 16-port RAN. The HMC is already attached to two pSeries p630s.  What upgrades， if any， are needed to the HMC to support the new p655 servers？（）

    • A、No upgrades are needed.
    • B、Add another 16-port RAN.
    • C、Add an 8-port async adapter.
    • D、Add an additional 128-port adapter.

    正确答案:C

  • 第6题：

    A manufacturing customer has an existing SAN for their AIX servers and they want to add theirWindows servers with file level access to their existing storage pool. Which of the following is thelowest cost solution?（）

    • A、N7900 
    • B、N6040 
    • C、DS3300 
    • D、DS3500

    正确答案:B

  • 第7题：

    A banking customer deployed an IBM BladeCenter chassis with one Brocade 8Gb SAN switch module. The customer requires an 8Gb uplink or higher. Which configuration will meet this request of the following？（）

    • A、Brocade Enterprise 20-port 8Gb SAN switch module
    • B、Brocade 20-port8Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM BladeCenter
    • C、Brocade Enterprise 10-port 8Gb SAN switch module
    • D、Brocade 10-port8Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM BladeCenter

    正确答案:A

  • 第8题：

    单选题
    A customer has an existing high availability SAN environment with CLARiiON, which has been stable for 16 months. They have recently experienced several outages with their current storage systems. They need to purchase additional storage and have asked about tier 1 storage. They are concerned with connecting their existing storage and servers without trouble. Which resource should be consulted while developing the solution options?（）
    A

    Disk Magic

    B

    TPC for Data

    C

    CLARiiON Procedure Generator

    D

    System Storage Interoperability Center


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700.  They would like to upgrade and plan for 40 TB capacity.  The customer needs to move to a more scalable storage system to include all servers.Which of the following would be most appropriate to ask first?（）
    A

    What are the plans for Disaster Recovery? 

    B

    What are the plans for data migration? 

    C

    Would iSCSI meet your needs? 

    D

    How much space is available in the current storage systems?


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A manufacturing customer has an existing SAN for their AIX servers and they want to add theirWindows servers with file level access to their existing storage pool. Which of the following is thelowest cost solution?（）
    A

    N7900 

    B

    N6040 

    C

    DS3300 

    D

    DS3500


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    An IBM Business Partner has sold a DS5020 and new IBM SAN switches to replace a customer EMC storage infrastructure. The customer dissatisfaction has arisen during the installation because according to the DS5020 interoperability matrix， two HP Proliant servers running Exchange have FC HBAs that are not supported. Which of the following is the most probable cause of the customer dissatisfaction（）
    A

    The EMC storage specialist has not participated in the TDA meeting

    B

    The FC HBAs are 4 Gbps technology

    C

    The Technical and Delivery Assessment review actions were not executed

    D

    The customer should have checked that the HBAs are supported according to the HP storage interoperability matrix


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）
    A

     A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 

    B

     SAN port channels can include up to 16 interfaces.

    C

     SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.

    D

     The links in SAN port channels can be connected to different sets of switches.

    E

     The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A banking customer deployed an IBM BladeCenter chassis with one Brocade 8Gb SAN switch module. The customer requires an 8Gb uplink or higher. Which configuration will meet this request?（）

    • A、Brocade Enterprise 20-port 8Gb SAN switch module 
    • B、Brocade 20-port 8Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM BladeCenter share 
    • C、Brocade Enterprise 10-port 8Gb SAN switch module 
    • D、Brocade 10-port 8Gb SAN switch module and Brocade Advanced Performance Monitoring for IBM BladeCenter

    正确答案:A

  • 第14题：

    A customer has an existing DS5300 system attached to two Brocade switches with eight Windowsservers. The customer wants to add their System i p750 server to this SAN. From the followingchoices what is the simplest and least expensive solution for this customer？（）

    • A、add twofibre HBAs to the System i and connect to the SAN
    • B、add twofibre HBAs to the System i and connect to the Windows Servers
    • C、add twofibre HBAs to the System i and connect to the System i using VIOS
    • D、add two SAS HBAs to the Systemi array and connect directly to the DS5300

    正确答案:A

  • 第15题：

    An IBM Business Partner has sold a DS5020 and new IBM SAN switches to replace a customer EMC storage infrastructure. The customer dissatisfaction has arisen during the installation because according to the DS5020 interoperability matrix， two HP Proliant servers running Exchange have FC HBAs that are not supported. Which of the following is the most probable cause of the customer dissatisfaction（）

    • A、The EMC storage specialist has not participated in the TDA meeting
    • B、The FC HBAs are 4 Gbps technology
    • C、The Technical and Delivery Assessment review actions were not executed
    • D、The customer should have checked that the HBAs are supported according to the HP storage interoperability matrix

    正确答案:C

  • 第16题：

    A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR. Which of the following should be added for the seventh LPAR boot device?（）

    • A、An additional 7311-D10 drawer
    • B、An adapter to boot off a SAN device
    • C、An additional disk to the media bay
    • D、Two disks to the internal configuration

    正确答案:B

  • 第17题：

    A manufacturing customer has a requirement to add 12 additional dual-attached servers to theirexisting two Brocade 16 port SAN switches that have no more ports available. Which of thefollowing should be recommended to accommodate the current capacity requirements, allow forfuture growth and provide 8 and 4 Gb support?（）

    • A、two SAN16B 
    • B、two SAN80B-4 
    • C、two SAN24B-4 
    • D、two SAN04B-R

    正确答案:B

  • 第18题：

    A customer has an existing high availability SAN environment with CLARiiON, which has been stable for 16 months. They have recently experienced several outages with their current storage systems. They need to purchase additional storage and have asked about tier 1 storage. They are concerned with connecting their existing storage and servers without trouble. Which resource should be consulted while developing the solution options?（）

    • A、Disk Magic
    • B、TPC for Data
    • C、CLARiiON Procedure Generator
    • D、System Storage Interoperability Center

    正确答案:D

  • 第19题：

    单选题
    A manufacturing customer has a requirement to add 12 additional dual-attached servers to theirexisting two Brocade 16 port SAN switches that have no more ports available. Which of thefollowing should be recommended to accommodate the current capacity requirements, allow forfuture growth and provide 8 and 4 Gb support?（）
    A

    two SAN16B 

    B

    two SAN80B-4 

    C

    two SAN24B-4 

    D

    two SAN04B-R


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    The customer has both a Windows SAN and a separate UNIX SAN. Each of these is managed bya different group. The UNIX group has a need for more resources and no available funding. Whatis the first question the storage specialist should ask?（）
    A

    What is the SAN topology? 

    B

    Which vendor's storage product do you use? 

    C

    Are there additional storage resources available in the Windows SAN? 

    D

    Are there additional switch ports available in both the Windows and UNIX SANs?


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）
    A

    4

    B

    3

    C

    2

    D

    8


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    Two file servers have run out of local disk space. The internal drives are at capacity and the company has traditionally only used local disks for storage. Which of the following is the MOST cost effective solution to add storage to both servers?（）
    A

    Install fiber cards into the servers and add direct attached storage.

    B

    Install fiber cards into the servers and implement a SAN solution.

    C

    Attach a USB drive to one of the servers.

    D

    Add a NAS to the environment


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Two file servers have run out of local disk space. The internal drives are at capacity and the company has traditionally only used local disks for storage.  Which of the following is the MOST cost effective solution to add storage to both servers？（）
    A

     Install fiber cards into the servers and add direct attached storage.

    B

     Install fiber cards into the servers and implement a SAN solution.

    C

     Attach a USB drive to one of the servers.

    D

     Add a NAS to the environment.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A company needs to connect seven of their Windows-based servers to a DS4000 storage server.   The DS4000 only has two host-side connections， and each server has two HBAs.  Which of the following is the lowest cost solution to provide no single points of failure？（）
    A

    Implement two 8-port switches design with ISLs

    B

    Implement two 16-port switches design with ISLs

    C

    Implement two 8-port switches design without ISLs

    D

    Implement two 16-port switches design without ISLs


    正确答案： C
    解析： 暂无解析

相关内容