A.IP23
B.IP34
C.IP66
D.IP67
第1题:
A.AP6010SN-GN
B.AP6310SN-GN
C.AP6510DN-AGN
D.AP6010DN-AGN
E.AP6610DN-AGN
第2题:
WLAN产品中室内单频AP,室内大功率AP,室外双频AP(千兆光口上行)的设备型号分别是什么()。
第3题:
WLAN专线经常掉线的原因()?
第4题:
配置如下:[H3C] wlanradio-policy1[H3C-wlan-rp-1] clientmax-count20[H3C] wlanservice-template1clear[H3C-wlan-st-1] ssidvip[H3C-wlan-st-1] bindWLAN-ESS1[H3C-wlan-st-1] clientmax-count10[H3C-wlan-st-1] service-templateenable[H3C] wlanservice-template2clear[H3C-wlan-st-2] ssidH3C[H3C-wlan-st-2] bindWLAN-ESS2[H3C-wlan-st-2] clientmax-count15[H3C-wlan-st-2] service-templateenable[H3C] wlanapap1[H3C-wlan-ap-ap1] radio1[H3C-wlan-ap-ap1-radio-1] radio-policy1[H3C-wlan-ap-ap1-radio-1] service-template1[H3C-wlan-ap-ap1-radio-1] service-template2[H3C-wlan-ap-ap1-radio-1] radioenable假设此时ap1radio1的SSID“H3C”上已经连接13个无线客户端,则根据以上配置判断,ap1 radio1的SSID“vip”最多还可以连接()个无线客户端。
第5题:
WLAN热点交换机接入AP端口配置的方式。
第6题:
下列哪条命令是属于查看单AP下的连接用户数假设AP-name为H3C?()
第7题:
典型的WLAN产品,如AP(AccessPoint,接入点),输出功率为多少?
第8题:
若某覆盖区域中对WLAN容量需求较高,应考虑()的建设方式。
第9题:
第10题:
AP6010SN-GN
AP6310SN-GN
AP6510DN-AGN
AP6010DN-AGN
AP6610DN-AGN
第11题:
室内放装型
室内分布型
室外普通型
室外回传型
第12题:
IP23
IP34
IP66
IP67
第13题:
第14题:
室外型AP设备电源建议具备()防护能力。
第15题:
WLAN 的切换指的是在相同的 SSID(AP)之间,移动终端与新的 AP 建立新的连接,并切断原来 AP 的连接过程。()
第16题:
无线控制器和瘦AP组网配置中,通过什么命令可以查看连接到指定AP下的客户端详细信息?()
第17题:
将WLAN设备置于相对较低的位置,可以有效地消除AP与WLAN终端之间的固定或移动的遮挡物,从而能够保证WLAN 的覆盖范围,保障WLAN的畅通。
第18题:
WLAN的覆盖方式有()
第19题:
WLAN室外AP产品的防护级别为()。
第20题:
WLAN网络中所谓“无线AP”的AP的全称为()
第21题:
室内分布系统合路
室外分布系统合路
室内放装
室外型AP+定向天线
第22题:
室内型单独建设方式与已有系统共用分布系统方式
AC+AP的覆盖方式
室外型AP覆盖方式和Mesh型网络覆盖方式
无线回传方式
第23题:
100mv
200mv
500mv
1000mv
第24题:
passed by the AP to its connected switch and then forwarded directly to the connected router,which creates an MGID table entry
passed by the AP to the WLAN controller and then forwarded to the source PIM-enabled router,which creates an MGID table entry
passed by the AP to the WLAN controller, which creates an MGID table entry before forwarding to the directly connected PIM-enabled router
passed by the AP to its connected switch and then forwarded to the rendezvous point router,which creates an MGID table entry