niusouti.com

Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100

题目

Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）

A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

相似考题

1.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

2.Refer to the exhibit. Which two statements are true?()A. DHCPDISCOVER packets will reach the DHCP server.B. The router will not forward DHCPDIS COVER packets because it has not been configured to do so.C. This configuration is applied to interface Fa0/1.D. DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packets are broadcasts.E. DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have not been explicitly allowed by the ip forward - protocol command.F. This configuration is applied to interface Fa0/0.

3.Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1‘s (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode.Which of the following occurs？（）A.Fa0/0 failsB.The command is rejecteDC.The existing three neighbors failD.The neighborship with 172.16.2.20 fails and then reestablishesE.None of the other answers is correct

4.What address should be configured as the default－gateway for the host connected to interface Fa0／4 of Sw－AC3?()A.192.168.1.254B.192.168.22.254C.192.168.33.254D.192.168.44.254

参考答案和解析
参考答案：B
更多“Router R1 has a connected route for 10.1.1.0／24 off interface Fa0／0. Interface Fa0／0 has b ”相关问题

  • 第1题：

    Refer to the exhibit.If the devices produced the given output,what is the cause of the EtherChannel problem?()

    A.There is a speed mismatch between SW1‘s Fa0/1 and SW2‘s Fa0/1 interfaces.

    B.There is an MTU mismatch between SW1‘s Fa0/1 and SW2‘s Fa0/1 interfaces.

    C.There is an encapsulation mismatch between SW1‘s Fa0/1 and SW2‘s Fa0/1 interface.

    D.SW1‘s Fa0/1 interface is administratively shut down.


    参考答案：A

  • 第2题：

    Host 1 sends a request for a file to remote sever1. Which destination address does Host 1 place f the packet containing the request（）。

    • A、The Mac address of the NIC in Sever1
    • B、The IP address of Server 1.
    • C、The MAC address of the s0/0/0 interface of router R2
    • D、The IP address of the s0/0/0 interface of router R1
    • E、The IP address of the Fa0/0 interface of router R1

    正确答案:B

  • 第3题：

    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）

    • A、172.16.0.1/23
    • B、172.16.1.1/26
    • C、172.16.1.1/24
    • D、172.16.0.255/23
    • E、None of the other answers is correct.

    正确答案:A,D

  • 第4题：

    Which port role has interface Fa0/2 of switch 1 adopted for VLAN 47？（）

    • A、Root port
    • B、Nondesigned port
    • C、Designated port
    • D、Backup port
    • E、Alternate port
    • F、None of the other alternatives apply

    正确答案:C

  • 第5题：

    Router R1 has been conf igured with an ipv6 route 2000::/64 S0/0/0 64 command.Which of the following does the 64 at the end of the command represent?（）

    • A、Metric
    • B、Administrative distance
    • C、Timeout (seconds)
    • D、Prefix length
    • E、Interface ID

    正确答案:B

  • 第6题：

    Which two statements about the configuration of the switch interface are correct (Choose two)（）。

    • A、The switchport belongs only to VLAN 2
    • B、Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2
    • C、The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2
    • D、A network host can be connected to this interface

    正确答案:A,D

  • 第7题：

    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）

    • A、The show ip ospf neighbors command lists two neighbors off Fa0/0.
    • B、The show ip ospf neighbors command lists four neighbors off Fa0/0.
    • C、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
    • D、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

    正确答案:B,C

  • 第8题：

    单选题
    Which port role has interface Fa0/2 of switch 1 adopted for VLAN 47？（）
    A

    Root port

    B

    Nondesigned port

    C

    Designated port

    D

    Backup port

    E

    Alternate port

    F

    None of the other alternatives apply


    正确答案： E
    解析： 暂无解析

  • 第9题：

    单选题
    Host 1 sends a request for a file to remote sever1. Which destination address does Host 1 place f the packet containing the request（）。
    A

    The Mac address of the NIC in Sever1

    B

    The IP address of Server 1.

    C

    The MAC address of the s0/0/0 interface of router R2

    D

    The IP address of the s0/0/0 interface of router R1

    E

    The IP address of the Fa0/0 interface of router R1


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?（） ipv6 unicast- routing interface f0/0 ipv6 rip one enable ipv6 address 2000::1/64 interface s0/0/0 ipv6 address 2001::/64 eui - 64 ipv6 rip one enable
    A

    RIPng will be enabled on no interfaces.

    B

    RIPng will be enabled on one interface.

    C

    RIPng will  be enabled on two interfaces.

    D

    RIPng will advertise about prefixes connected to S0/0/0 and F0/0, but only send Updates on one interface.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements about the configuration of the switch interface are correct (Choose two)（）。
    A

    The switchport belongs only to VLAN 2

    B

    Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2

    C

    The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2

    D

    A network host can be connected to this interface


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    单选题
    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）
    A

    R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

    B

    For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

    C

    For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

    D

    No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    The OSPF process has been started and the networks have been configured for Area 0 as shown in the diagram. The network administrator has several options for configuring RouterB to ensure that it will be preferred as the designated router (DR) for the 172.16.1.0 /24 LAN segment. What configuration tasks could be used to establish this preference (Choose three.)（）。

    A.Configure the priority value of the Fa0/0 interface of RouterB to a higher value than any other interface on the Ethernet network.

    B.Change the router id of Router B by assigning the IP address 172.16.1.130/24 to the Fa0/0 interface of RouterB.

    C.Configure a loopback interface on RouterB with an IP address higher than any IP address on the other routers.

    D.Change the priority value of the Fa0/0 interface of RouterB to zero.

    E.Change the priority values of the Fa0/0 interfaces of RouterA and RouterC to zero.

    F.No further configuration is necessary.


    参考答案：A, C, E

  • 第14题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第15题：

    You administer a network that uses two routers， R1 and R2， configured as an HSRP group to  provide redundancy for the gateway. Router R1 is the active router and has been configured as  follows：   R1#configure terminal   R1（config）#interface fa0/0   R1（config-if）#ip address 10.10.0.5 255.255.255.0   R1（config-if）#standby 1 priority 150   R1（config-if）#standby preempt delay minimum 50   R1（config-if）#standby 1 track interface fa0/2 15   R1（config-if）#standby 1 ip 10.10.0.20   Which of the following describes the effect the standby preempt delay minimum 50 command will  have on router R1？（）

    • A、 The HSRP priority for router R1 will increase to 200.
    • B、 Router R1 will become the standby router if the priority drops below 50.
    • C、 The HSRP priority for router R1 will decrease to 50 points when Fa0/2 goes down.  
    • D、 Router R1 will wait 50 seconds before attempting to preempt the active router.

    正确答案:D

  • 第16题：

    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）

    • A、R1 will always create and flood a default route into the OSPF domain.
    • B、R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.
    • C、R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.
    • D、R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.

    正确答案:B

  • 第17题：

    Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs？（）

    • A、Fa0/0 fails
    • B、The command is rejecteD
    • C、The existing three neighbors fail
    • D、The neighborship with 172.16.2.20 fails and then reestablishes
    • E、None of the other answers is correct

    正确答案:C

  • 第18题：

    A router has been configured with the commands router eigrp 9 and network 72.16.1.0 0.0.0.255. No other EIGRP - related commands have been configured. The nswers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which answers list an IP address/prefix length that would cause the router to enable IGRP on Fa0/0?（）

    • A、172.16.0.1/23
    • B、172.16.1.1/26
    • C、172.16.1.1/24
    • D、172 .16.0.255/23
    • E、None of the other answers is correct.

    正确答案:B,C

  • 第19题：

    R1 has 5 working interfaces, with EIGRP neighbors existing off each interface. R1 has routes for subnets 10.1.1.0/24, 10.1.2.0/24, and 10.1.3.0/24, with EIGRP integer metrics of roughly 1 million, 2 million, a nd 3 million, respectively. An engineer then adds the ip summary - address eigrp 1 10.1.0.0 255.255.0.0 command to interface Fa0/0. Which of the following is true?（）

    • A、R1 loses and then reestablishes neighborships with all neighbors.
    • B、R1 no longer advert ises 10.1.1.0/24 to neighbors connected to Fa0/0.
    • C、1 advertises a 10.1.0.0/16 route out Fa0/0, with metric of around 3 million (largest metric of component subnets).
    • D、R1 advertises a 10.1.0.0/16 route out Fa0/0,with metric of around 2 million (med ian metric of component subnets).

    正确答案:B

  • 第20题：

    单选题
    R1 has 5 working interfaces, with EIGRP neighbors existing off each interface. R1 has routes for subnets 10.1.1.0/24, 10.1.2.0/24, and 10.1.3.0/24, with EIGRP integer metrics of roughly 1 million, 2 million, a nd 3 million, respectively. An engineer then adds the ip summary - address eigrp 1 10.1.0.0 255.255.0.0 command to interface Fa0/0. Which of the following is true?（）
    A

    R1 loses and then reestablishes neighborships with all neighbors.

    B

    R1 no longer advert ises 10.1.1.0/24 to neighbors connected to Fa0/0.

    C

    1 advertises a 10.1.0.0/16 route out Fa0/0, with metric of around 3 million (largest metric of component subnets).

    D

    R1 advertises a 10.1.0.0/16 route out Fa0/0,with metric of around 2 million (med ian metric of component subnets).


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
    A

    The show ip ospf neighbors command lists two neighbors off Fa0/0.

    B

    The show ip ospf neighbors command lists four neighbors off Fa0/0.

    C

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.

    D

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
    A

    show ip route

    B

    show ip eigrp topology

    C

    show ip ospf topology

    D

    show ip eigrp topology 10.1.1.0/24


    正确答案： D,C
    解析： 暂无解析

  • 第23题：

    多选题
    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）
    A

    172.16.0.1/23

    B

    172.16.1.1/26

    C

    172.16.1.1/24

    D

    172.16.0.255/23

    E

    None of the other answers is correct.


    正确答案： C,B
    解析： 暂无解析

相关内容