TFT(Thin Film Transistor)中文准确解释是()。A.向列型B.超扭曲向列型C.双层超扭曲向列型D.薄膜晶体管型

共用题干
Better Solar Energy Systems:More Heat,More Light

Solar photovoltaic（光电的）thermal energy systems , or PVTs , generate both heat and electricity , but
_________ (51)now they haven't been very good at the heat-generating part compared to a stand-alone
solar thermal collector. That ' s because they operate at low temperatures to cool crystalline silicon（晶体硅）
solar cells, _______(52)lets the silicon generate more electricity but isn't a very efficient way to gather
heat.
That's a problem of economics.Good solar hot-water systems can harvest much more energy than a
solar一electric system at a substantially lower _________(53).And it's also a space problem:photovoltaic
cells can
_________(54)up all the space on the roof,leaving little room for thermal applications.
In a pair of studies,Joshua Pearce,an associate professor of materials science and engineering,has de-
vised a_________(55)in the form of a better PVT made with a different kind of silicon.
Most solar panels are made with crystalline silicon,but you can also make solar cells out of amorphous
（非晶形的）silicon , commonly known
________( 56 ) thin-film silicon. They don ' t create as much elec-
tricity,but they are lighter,flexible,and cheaper. And,because they________(57)much less silicon,they
have a greener footprint._________(58),thin-film silicon solar cells are vulnerable to some bad一news
physics in the form of the Staebler-Wronski effect.
"That means that their efficiency drops when you_________(59)them to light一pretty much the worst
possible effect for a solar cell,"Pearce explains,which is one of the__________(60)thin-film solar panels
make up only a small fraction of the market.
However,Pearce and his team found a_______(61)to engineer around the Staebler-Wronski effect by
incorporating thin-film silicon in a new________(62)of PVT. You don't have to cool down thin-film sili-
con to make it work.In fact,Pearce's group discovered that by heating it to solar-thermal operating tempera-
tures,near the boiling_________(63)of water,they could make thicker cells that largely_________(64)
the Staebler-Wronski effect.When they applied the thin-film silicon directly to a solar thermal energy collector,
they also found that by baking the cell once a day,they_________(65)the solar cell's electrical efficiency
by over 10 percent.

_________(57)
A:retrieve
B:require
C:merge
D:exchange

共用题干
Better Solar Energy Systems: More Heat, More Light
Solar photovoltaic thermal energy systems,or PVTs,generate both heat and electricity,but until now they haven't been very good at the heat-generating part compared to a stand-alone solar thermal collector. That's because they operate at low temperatures to cool crystalline silicon solar cells,which lets the silicon generate more electricity but isn't a very efficient way to gather heat.
That's a problem of economics. Good solar hot-water systems can harvest much more energy than a solar-electric system at a substantially lower cost. And it's also a space problem:photovol-taic cells can take up all the space on the roof,leaving little room for thermal applications.
In a pair of studies,Joshua Pearce,an associate professor of materials science and engineer-ing,has devised a solution in the form of a better PVT made with a different kind of silicon.His research collaborators are Kunal Girotra from Thin Silicon in California and Michael Pathak and Stephen Harrison from Queen's University,Canada.
Most solar panels are made with crystalline silicon,but you can also make solar cells out of amorphous silicon,commonly known as thin-film silicon.They don't create as much electricity, but they are lighter,flexible,and cheaper. And,because they require much less silicon,they have a greener footprint. Unfortunately,thin-film silicon solar cells are vulnerable to some bad-news physics in the form of the Staebler-Wronski effect.
"That means that their efficiency drops when you expose them to light-pretty much the worst possible effect for a solar cell,"Pearce explains,which is one of the reasons thin-film solar panels make up only a small fraction of the market.
However,Pearce and his team found a way to engineer around the Staebler-Wronski effect by incorporating thin-film silicon in a new type of PVT. You don't have to cool down thin-film silicon to make it work.In fact,Pearce's group discovered that by heating it to solar-thermal operating temperatures,near the boiling point of water,they could make thicker cells that largely overcame the Staebler-Wronski effect. When they applied the thin-fulm silicon directly to a solar thermal en-ergy collector,they also found that by baking the cell once a day,they boosted the solar cell's e-lectrical efficiency by over 10 percent.

Which of the following is NOT mentioned as an advantage of thin-film silicon solar cells?
A:.They are electrically efficient.
B: They are less expensive.
C:.They are flexible.
D: They are environment friendly.

共用题干
Better Solar Energy Systems: More Heat, More Light
Solar photovoltaic thermal energy systems,or PVTs,generate both heat and electricity,but until now they haven't been very good at the heat-generating part compared to a stand-alone solar thermal collector. That's because they operate at low temperatures to cool crystalline silicon solar cells,which lets the silicon generate more electricity but isn't a very efficient way to gather heat.
That's a problem of economics. Good solar hot-water systems can harvest much more energy than a solar-electric system at a substantially lower cost. And it's also a space problem:photovol-taic cells can take up all the space on the roof,leaving little room for thermal applications.
In a pair of studies,Joshua Pearce,an associate professor of materials science and engineer-ing,has devised a solution in the form of a better PVT made with a different kind of silicon.His research collaborators are Kunal Girotra from Thin Silicon in California and Michael Pathak and Stephen Harrison from Queen's University,Canada.
Most solar panels are made with crystalline silicon,but you can also make solar cells out of amorphous silicon,commonly known as thin-film silicon.They don't create as much electricity, but they are lighter,flexible,and cheaper. And,because they require much less silicon,they have a greener footprint. Unfortunately,thin-film silicon solar cells are vulnerable to some bad-news physics in the form of the Staebler-Wronski effect.
"That means that their efficiency drops when you expose them to light-pretty much the worst possible effect for a solar cell,"Pearce explains,which is one of the reasons thin-film solar panels make up only a small fraction of the market.
However,Pearce and his team found a way to engineer around the Staebler-Wronski effect by incorporating thin-film silicon in a new type of PVT. You don't have to cool down thin-film silicon to make it work.In fact,Pearce's group discovered that by heating it to solar-thermal operating temperatures,near the boiling point of water,they could make thicker cells that largely overcame the Staebler-Wronski effect. When they applied the thin-fulm silicon directly to a solar thermal en-ergy collector,they also found that by baking the cell once a day,they boosted the solar cell's e-lectrical efficiency by over 10 percent.

One of the problems PVTs have is that______.
A: their thermal applications are costly
B: they are too expensive to afford
C: they occupy too much space
D: it is hard to fix them on the roof

共用题干
Better Solar Energy Systems: More Heat, More Light
Solar photovoltaic thermal energy systems,or PVTs,generate both heat and electricity,but until now they haven't been very good at the heat-generating part compared to a stand-alone solar thermal collector. That's because they operate at low temperatures to cool crystalline silicon solar cells,which lets the silicon generate more electricity but isn't a very efficient way to gather heat.
That's a problem of economics. Good solar hot-water systems can harvest much more energy than a solar-electric system at a substantially lower cost. And it's also a space problem:photovol-taic cells can take up all the space on the roof,leaving little room for thermal applications.
In a pair of studies,Joshua Pearce,an associate professor of materials science and engineer-ing,has devised a solution in the form of a better PVT made with a different kind of silicon.His research collaborators are Kunal Girotra from Thin Silicon in California and Michael Pathak and Stephen Harrison from Queen's University,Canada.
Most solar panels are made with crystalline silicon,but you can also make solar cells out of amorphous silicon,commonly known as thin-film silicon.They don't create as much electricity, but they are lighter,flexible,and cheaper. And,because they require much less silicon,they have a greener footprint. Unfortunately,thin-film silicon solar cells are vulnerable to some bad-news physics in the form of the Staebler-Wronski effect.
"That means that their efficiency drops when you expose them to light-pretty much the worst possible effect for a solar cell,"Pearce explains,which is one of the reasons thin-film solar panels make up only a small fraction of the market.
However,Pearce and his team found a way to engineer around the Staebler-Wronski effect by incorporating thin-film silicon in a new type of PVT. You don't have to cool down thin-film silicon to make it work.In fact,Pearce's group discovered that by heating it to solar-thermal operating temperatures,near the boiling point of water,they could make thicker cells that largely overcame the Staebler-Wronski effect. When they applied the thin-fulm silicon directly to a solar thermal en-ergy collector,they also found that by baking the cell once a day,they boosted the solar cell's e-lectrical efficiency by over 10 percent.

Which of the following statrnents is true?
A: Thin-film silicon's electrical efficiency improves when heated up.
B: New techniques have been developed to produce thin-film silicon.
C: Thin-film silicon works efficiently at low temperature.
D: A new material enlarging the Staebler-WronsKi effect has been created.