niusouti.com
You are the network administrator for Ezonexam. You are planning to upgrade 35 Windows NT Server 4.0 computers to Windows 2000 Server. You want to accomplish the upgrades by using a distribution server. The Windows NT Server 4.0 computers support a tight
题目
You are the network administrator for Ezonexam. You are planning to upgrade 35 Windows NT Server 4.0 computers to Windows 2000 Server. You want to accomplish the upgrades by using a distribution server. The Windows NT Server 4.0 computers support a tight production schedule that requires them to be online from 8:00 A.M. to midnight, seven days a week. You schedule the upgrade to run during non-business hours. Because of the limited amount of time the upgrades must be performed as quickly as possible.
You want to complete the upgrades before production begins in the morning.
What should you do?
A．Perform. an unattended installation by running the winnt32 command and the /cmdcons switch.
B．Perform. an unattended installation by running the winnt32 command and specify the use of a .txt file and a uniqueness database file.
C．Perform. an unattended installation by running the winnt command and specify the use of a .txt file and a uniqueness database file.
D．Perform. an unattended installation by using a Winnt.sif file with a commands section that initiates the Update.exe command in quiet mode.
相似考题
参考答案和解析
解析：Explanation: Performing an unattended installation from a distribution server will work since the upgrade must be done in non-business hours.
An answer file provides the generic answers to setup questions. This is typically a file with a .txt extension (although the extension does not matter).
A uniqueness database file: This file, which has a .udf extension, provides the answers to computer specific questions that will change from machine to machine (for example, the computer name). Thus it identifies names of computers.
Incorrect answers:
A: This /cmdcons switch specifies that files required for command-line repair console be installed when making use of winnt32.exe. This is not what is required; you need to completer upgrades and not repair.
C: The winnt.exe command line is used in DOS-based and 16-bit installations.
D: To use a bootable CD-ROM for a fully automated operating system installation, the answer file must be called Winnt.sif and be located on a floppy disk. This is not how the upgrade is envisaged under the given circumstances.
更多“You are the network administrator for Ezonexam. You are planning to upgrade 35 Windows NT Server 4.0 computers to Windows 2000 Server. You want to accomplish the upgrades by using a distribution server. The Windows NT Server 4.0 computers support a tight ”相关问题
-
第1题：
You are the network administrator for Ezonexam.
Ezonexam14 is one of 10 Windows NT Server 4.0 member servers in a Windows 2000 domain named marketing.Ezonexam.local. The marketing domain also has five Windows NT 4.0 backup domain controllers. The marketing.Ezonexam.local domain is the child domain of Ezonexam's root domain, Ezonexam.local.
You want to upgrade Ezonexam14 to Windows 2000 Server and change the role of Ezonexam14 from a member server to a domain controller in the same domain. You also want to be able to implement Universal Groups in the marketing domain.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Upgrade all of the Windows NT Server 4.0 member servers in the marketing domain to Windows 2000 Server.
B. Upgrade all of the Windows Server 4.0 backup domain controllers in the marketing domain to Windows 2000 Server.
C. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 a domain controller in the marketing.Ezonexam.local domain.
D. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 to a domain controller in the Ezonexam.local domain.
E. Use the Active Directory Domains and Trusts tool to change the Ezonexam.local domain mode to native mode.
F. Use the Active Directory Domains and Trusts to change the marketing.Ezonexam.local domain mode to native mode.
正确答案：BCF
B,C,F 解析：Explanation: A backup domain controller (BDC) - In a Windows NT Server domain, a computer that receives a copy of the domain's security policy and domain database and authenticates network logons. It provides a backup if the primary domain controller (PDC) becomes unavailable.
Once a server has been installed with Windows Server 2000, you can upgrade it to a domain controller through the Dcpromo utility.
Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.
Incorrect answers:
A: You should be upgrading the domain controllers and not the member servers.
D: This option is faulty since it asks for the upgrading of the domain controllers in Ezonexam.local instead of marketing.Ezonexam.local.
E: This option is faulty as it should be changing the marketing.Ezonexam.local domain and not the Ezonexam.local domain. -
第2题：
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
正确答案：A
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC. -
第3题：
You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.
You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.
You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.
What should you do?
A．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.
B．Copy the Windows NT policy file to the 20 Windows NT Workstation computers.
C．Create a Windows 2000 Group Policy that denies user access to My Network Places.
D．Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.
正确答案：C
解析：Explanation: Windows NT 4.0 system polices affect computers running Windows NT 4.0. The Windows NT computers in this scenario are being used as Terminals for the Windows 2000 Server computer that is running Terminal Services. In effect the Windows NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server. This can be done by using a group policy.
Incorrect answers:
A: System policy templates only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.
B: Windows NT policies only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.
D: The NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server.
-
第4题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.
The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
A．On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
B．On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
正确答案：D
解析：Explanation: We upgrade Ezonexam1. We have no choice that the upgraded Windows 2000 Server will be a domain controller. We are then able to use the dcpromo.exe utility to remove the Active Directory and demote the Domain controller to a member server.
Incorrect Answers
A: It is not necessary to format the stripe set containing the employee data. This proposed solution would work, but it is not the fastest method.
B: A dual-boot system is not necessary.
C: You cannot upgrade a Windows NT 4.0 domain controller to a Windows 2000 member server. The Windows 2000 Server will be a domain controller.
-
第5题：
You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.
You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.
You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.
You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?
A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.
B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.
C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.
D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
正确答案：A
解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.
Incorrect answers:
B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.
-
第6题：
You are the network administrator for Ezonexam.
ServerEzonexam14 is a Windows NT Server 4.0 computer. ServerEzonexam14 is also a member server in a Windows 2000 domain named marketing.Ezonexam.local. The marketing.Ezonexam.local domain also has five Windows NT Server 4.0 backup domain controllers.
You want to upgrade ServerEzonexam14 to a Windows 2000 member server in the marketing.Ezonexam.local domain. You also want to be able to implement Universal Groups in the marketing.Ezonexam.local domain.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Reinstall Windows NT Server 4.0 on ServerEzonexam14 in the same WINNT folder, and make ServerEzonexam14 a BDC in the marketing domain.
B. Run the Active Directory Installation Wizard to make ServerEzonexam14 a domain controller in the marketing.Ezonexam.local domain.
C. Run the Active Directory Installation Wizard to convert ServerEzonexam14 to a domain controller in the fabrikam.local domain.
D. Upgrade all the Windows NT Server 4.0 backup domain controllers in marketing.Ezonexam.local to Windows 2000 Server.
E. Upgrade all the Windows NT Server 4.0 backup domain controllers in Ezonexam.local to Windows 2000 Server.
F. Upgrade ServerEzonexam14 to Windows 2000 Server.
G. Upgrade the marketing.Ezonexam.local domain to native mode.
正确答案：DFG
D,F,G 解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration. A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported. Thus to comply with the requirements of having universal groups and upgrading ServerEzonexam14 to a Windows 2000 member server in the marketing.Ezonexam.local domain, options D, F and G is the solution.
Incorrect answers:
A: A backup domain controller (BDC) - In a Windows NT Server domain, a computer that receives a copy of the domain's security policy and domain database and authenticates network logons. It provides a backup if the primary domain controller (PDC) becomes unavailable. A domain is not required to have a BDC. This is not what is required.
B: Making ServerEzonexam14 a domain controller is not the same as upgrading it to a Windows 2000 member server. A member server must be upgraded to a domain controller.
C: You should be upgrading ServerEzonexam14 to a Windows 2000 Member server in the marketing.Ezonexam.local domain and not the fabrikam.local domain.
E: This option is faulty since it asks for the upgrading of the domain controllers in Ezonexam.local instead of marketing.Ezonexam.local.
-
第7题：
You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.
You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.
However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
You are unable to perform. the upgrade. What should you do to resolve the problem?
A．Convert the system partition to NTFS.
B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
正确答案：C
解析：Explanation:WhenupgradingearlierversionsofWindowstoWindows2000wemustusewinnt32.exeandmustlaunchitfromwithintheWindowsenvironment.Incorrectanswers:A:Windows2000canbeinstalledorupgradedonadiskorpartitionthatisformattedwiththeFATfilesystem.ThereisthusnoneedtoconvertthefilesystemtoNTFS.B:TheAdvancedConfigurationandPowerInterfaceisusedforpowermanagementanddoesnotaffecttheinstallationorupgradeprocess.ItwouldthusnotbenecessarytodisableACPI.D:ThesetupfloppydisksuseWinnt.exetoinstallWindows2000.WehowevercanonlyusethesetupfloppydiskstoinstallacleancopyofWindows2000onthecomputer.WecannotupgradetheoperatingsystemtoWindows2000usingthesetupfloppydisks.Wemustusewinnt32.exetoupgradeearlierversionsofWindowstoWindows2000. -
第8题：
You are the network administrator for Ezonexam. You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You want to install a custom application as part of the upgrade.
You need to include the necessary commands so that the custom application is automatically installed as part of the upgrade process.
What should you do?
A．Create a command file named Cmdlines.txt to install the application. Copy the Cmdlines.txt file to the subfolder named $OEM$ under the i386 folder.
B．Create a command file named Unattend.txt to install the application. Copy the Unattend.txt file to the subfolder $OEM$\textmode under the i386 folder.
C．Create a subfolder named $OEM$\$C\Applications under the i386 folder. Copy the application files to that subfolder.
D．Create a second network shared folder named $OEM$. Copy the application to that share point.
正确答案：C
解析：Explanation:Inthe[Unattended]sectionthereisanoriginalequipmentmanufacturer(OEM)PreinstallentrythattellsSetupwhethertocopythe$OEM$subfoldersfromthedistributionfolderstothetargetcomputer.Youneedtocopytheapplicationfilestothesubfolderthathasbeencreatedunderthei386foldersoastoincludethenecessarycommandsforthecustomapplicationtobeinstalledautomaticallywhenupgrading. -
第9题：
You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers. According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network. You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network. What should you do？ （）
- A、 On each domain controller， disable Server Message Block （SMB） signing and encryption of the secure channel traffic.
- B、 Replace all Windows 98 computers with new Windows XP Professional computers.
- C、 Install the Active Directory Client Extensions software on the Windows 98 computers.
- D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.
正确答案:B -
第10题：
Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）
- A、Can’t be done.
- B、You need to put Windows 2000 on a separate partition from Windows NT 4.0
- C、You need to put Windows 2000 on the same partition as Windows NT 4.0.
- D、You need to upgrade Windows NT 4.0 to SP4.
正确答案:D -
第11题：
You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）
- A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
- B、Use Windows 2000 Professional to configure drive C as a dynamic partition
- C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
- D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
正确答案:D -
第12题：
单选题Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）ACan’t be done.
BYou need to put Windows 2000 on a separate partition from Windows NT 4.0
CYou need to put Windows 2000 on the same partition as Windows NT 4.0.
DYou need to upgrade Windows NT 4.0 to SP4.
正确答案： A解析： If you want to make NTFS （V4） for Windows NT 4.0 to be compatible with NTFS （V5） of windows 2000， service pack 4 is required for Windows NT 4.0. You can put both operating system i.e. Windows NT 4.0 and Windows 2000 Professional on the same partition or on the different partition but recommended option is to place the windows 2000 professional on the different partition from windows NT 4.0. -
第13题：
You are the administrator of your company's network. The network is configured as shown in the exhibit.
You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.
You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.
What should you do?
A．Add a computer running DHCP Relay Agent to the marketing segment.
B．Add a computer running the network monitor driver to the marketing segment.
C．Move the Windows 2000 Server computer running WINS to the marketing segment.
D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.
正确答案：A
解析：Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.
Incorrect answers:
B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate.
C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers.
D: A DHCP server, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant. -
第14题：
You are the administrator for your company's network. The network is configured as shown in the exhibit.
You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.
You create a RIS image. You load the image onto the RIS server. You then start the new computers.
You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.
What should you do?
A．Add a Windows 2000 Server computer running WINS to the network.
B．Add a Windows 2000 Server computer running DHCP to the network.
C．Add the domain Everyone group to the RIS OS image security settings.
D．Place the new computers on the same segment as the RIS server.
正确答案：B
解析：Explanation:RIShasthefollowingrequirements:(1)DNSserver,(2)DHCPserverand(3)ActiveDirectory(Windows2000DomainController)TheexhibitshowsthepresenceofActiveDirectoryandDNS,butalackofaDHCPserver.WemustthereforeaddaDHCPserver.Incorrectanswers:A:RISdoesnotuseWINSatall.RISrequiresDNSfornameresolution.C:ThereshouldbenoneedtomanuallyconfigurefilepermissionsontheRISOSimage.D:MovingthenewcomputersintothesamesegmentwillnotworksincethereisnoDHCPserverpresent.Generally,RISworkswellinnetworkswithsubnets. -
第15题：
You are the network administrator for Ezonexam.com.
You are planning to upgrade 10 Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You have used the distribution folder to successfully upgrade other Windows NT Server 4.0 computers to Windows 2000. For these 10 new upgrades you wan to include a new service pack.
You need to include the new service pack in the distribution folder so that the service pack is automatically installed during the upgrade process.
What should you do?
A．Create a sub folder named $OEM$\$C\SP under the i386 folder. Copy the new service pack to that subfolder.
B．Create a subfolder named $OEM$\$$\SP under the i386 folder. Copy the new service pack to that subfolder.
C．Run Update.exe from the new service pack and specify the -s option.
D．Run winnt32 on the Windows NT Server 4.0 computers and specify the /u option
正确答案：C
解析：Explanation: Running the update.exe command installs hotfixes and service packs, etc. -
第16题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.
Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.
You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.
What should you do?
(Each correct answer presents part of the solution. Choose two.)
A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0
B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.
D．Make any user accounts on Ezonexam1 members of Domain Global groups.
E．Convert the Windows 2000 domains to native mode.
正确答案：CE
解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration.
A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.
Since Ezonexam1 is a backup domain controller, requires the use of universal groups and cannot run the application, you need to upgrade Ezonexam1 to a member server, make it a domain controller and after the upgrade demote the domain controller as well as convert the Windows 2000 domains to native mode so as to be able to run the new application.
Incorrect answers:
A: This will not allow the application to run.
B: You need to demote the domain controller to member server after the upgrade.
D: You need to make provision for universal groups as required in the question. Even though universal groups can contain domain global groups, this is not what is required.
-
第17题：
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.
You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.
What should you do? (Choose all that apply)
A．Convert the system partition to NTFS.
B．Install service pack4 or later on the server.
C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
正确答案：B
解析：Explanation: To ensure that no application data or user data is lost during the upgrade the following two steps will be taken:
1. Install service pack4 (B).
2. Start the installation process from within the Windows environment and select the option to upgrade (almost C, but not quite).
Incorrect answers:
A: NTFS is not required
C: You can't upgrade to Windows 2000 by booting from the CD. The CD must be run from within the NT environment.
D: It is not necessary to install a standard NT Server 4.0 server.
-
第18题：
You are the network administrator for Ezonexam.
You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You need to install a custom application as part of the upgrade.
You need to include the commands necessary so that the custom application is installed as part of the upgrade process.
What should you do? (Each correct answer presents part of the solution. Choose two)
A．Create a command file named Unattend.txt to install the application.
B．Create a command file named Cmdlines.txt to install the application.
C．Copy the command file to the \$OEM\$C\ subfolder under the i386 folder.
D．Copy the command file to the subfolder named \$OEM$ under the i386 folder.
E．Copy the command file to the subfolder named \$OEM$\textmode under the i386 folder.
正确答案：BD
解析：Explanation:Thisexampleassumesthatyouarepre-installingthedriversbyusingadistributionfolderandthatthedistributionfolderhasalreadybeencreated.1.Ifitdoesnotalreadyexist,createa$OEM$directoryunderyourdistributionfolder.Forexample:X:\i386\$OEM$2.CreateadirectorynamedTEXTMODEunderthe$OEM$directory.Forexample:X:\i386\$OEM$\TEXTMODE3.Copythedriverfilesfromthethirdpartyintothisdirectory.ThisconsistsofaTxtsetup.oemfileandatleastonedriverfile(the.sysfile),althoughtheremaybemore.CopyallofthefilesintotheTEXTMODEdirectory.4.EdittheX:\i386\$OEM$\Textmode\Txtsetup.oemfilebyusinganystandardtexteditorsuchasNotepadorEDIT.5.Etc. -
第19题：
You are the administrator for Ezonexam.com's network.
Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.
You want to make the shared folders on FileServ available to the UNIX computers.
What should you do?
A．Install and configure Network File System (NFS) on FileServ.
B．Configure data volumes on FileServ to be FAT volumes.
C．Disable Server Message Block (SMB) signing on FileServ.
D．Install Simple TCP/IP Services on FileServ.
正确答案：A
解析：Explanation:ClickingMicrosoftWindowsNetworktellsyoursoftwarethatyouwanttousetheClientforMicrosoftNetworks,insteadofsomeotherinstalledclient,tofindservers.Forinstance,iftheNetwareclientwereinstalled,youwouldselectNetwareNetworkfromthebrowselisttosearchforNetwareservers.IfaUnixclientwerepresent(thereareanumberoftheseonthemarket),anoptionthatprobablyincludesthetermNFSwouldshowuponthelist.YouwouldselectittolookforserversrunningtheNFSfileserversoftware.IfyouinstallandconfigureNFSonFileServ,thenyouwillsupportUNIXcomputersaswell.Incorrectanswers:B:ConfiguringFATvolumeswillnotallowUNIXcomputerstoaccessthesharedfolders.C:ThisisnotaServerMessageBlocksigningissue.D:InstallingSimpleTCP/IPServicesonFileServisnotgoingtoavailthesharedfoldertoUNIXcomputers. -
第20题：
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）
- A、Install a DHCP server.
- B、Install a WINS server. Configure each computer to use WINS.
- C、Create an Lmhost file on each computer.
- D、Create a Hosts file on each computer.
正确答案:A -
第21题：
You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（ ）
- A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
- B、Existing user environments will be maintained on the Windows 2000 Professional computers.
- C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.
- D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.
正确答案:A,D -
第22题：
You are the administrator of a Windows 2000 network. You upgrade five computers in the sales department to Windows 2000 Professional. You then apply the Basicwk.inf security template to the upgraded computers. The remaining computers in the sales department are using Windows NT Workstation 4.0. When users log on to the Windows 2000 Professional computers they report that they are unable to run the company’s database application. When the users log on to Windows NT Workstation 4.0 computers they are able to run the database application. You want the users of Windows 2000 Professional computers to be able to run the database application. What should you do? （）
- A、Apply the Securews.inf security template to the computers.
- B、Apply the Compatsws.inf security template to the computers.
- C、Delete the Basicwk.inf security template file from the computers.
- D、For each user account， grant Read permission to the database application and its associated files.
- E、Use the System Policy Editor to configure a new security policy for the database application.
正确答案:B -
第23题：
As the administrator of your company’s network you are asked to upgrade several Windows NT 4.0 computers to Windows 2000 Professional. All user settings and application settings must be preserved. Most applications currently running are compatible with Windows 2000 and all the Windows NT 4.0 computers meet the minimum hardware requirements. After you upgrade several computers to Windows 2000 Professional, you find that some applications did not upgrade properly. What utilities and/or applications should be disabled (or removed) before upgrading?（）
- A、Custom printer third-party software.
- B、APM and Anti-virus software
- C、All Non-Microsoft Products
- D、All 32-bit applications
- E、Third-party video drivers
正确答案:B