niusouti.com

You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS i

题目

You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.

You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

What should you do?

A．Configure the DHCP scope to add additional IP addresses.

B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.

C．Modify the startup sequence in the CMOS of the remaining computers.

D．Create computer accounts on the remaining computers in the Active Directory.

相似考题

1.You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B．Existing user environments will be maintained on the Windows 2000 Professional computers.C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D．The RIS image and the upgraded applications will be enabled as they are added to the network.

2.You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

3.You want to install Windows 2000 Professional on 45 new computers on your company's network. You first install Windows 2000 Professional on one of the new computers.You log on to the computer by using the local Administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured.You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?A．Run Rbfg.exe before installing the standard applications.B．Run RIPrep.exe before installing the standard applications.C．Copy the All Users profile to the Default Users profile.D．Copy the local Administrator account profile to the Default Users profile

4.The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A．Create a Windows Group Policy that denies user access to My Network Places.B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

更多“You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS i”相关问题

  • 第1题：

    You are the administrator of your company's network. The network is configured as shown in the exhibit.

    You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.

    You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.

    What should you do?

    A．Add a computer running DHCP Relay Agent to the marketing segment.

    B．Add a computer running the network monitor driver to the marketing segment.

    C．Move the Windows 2000 Server computer running WINS to the marketing segment.

    D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.


    正确答案：A
    解析：Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isn't RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server will not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP configuration, and connect to the RIS server.

    Incorrect answers:
    B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate.

    C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers.

    D: A DHCP server, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant.

  • 第2题：

    You are the administrator for your company's network. The network is configured as shown in the exhibit.

    You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.

    You create a RIS image. You load the image onto the RIS server. You then start the new computers.

    You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.

    What should you do?

    A．Add a Windows 2000 Server computer running WINS to the network.

    B．Add a Windows 2000 Server computer running DHCP to the network.

    C．Add the domain Everyone group to the RIS OS image security settings.

    D．Place the new computers on the same segment as the RIS server.


    正确答案：B
    解析：Explanation:RIShasthefollowingrequirements:(1)DNSserver,(2)DHCPserverand(3)ActiveDirectory(Windows2000DomainController)TheexhibitshowsthepresenceofActiveDirectoryandDNS,butalackofaDHCPserver.WemustthereforeaddaDHCPserver.Incorrectanswers:A:RISdoesnotuseWINSatall.RISrequiresDNSfornameresolution.C:ThereshouldbenoneedtomanuallyconfigurefilepermissionsontheRISOSimage.D:MovingthenewcomputersintothesamesegmentwillnotworksincethereisnoDHCPserverpresent.Generally,RISworkswellinnetworkswithsubnets.

  • 第3题：

    You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.

    You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.

    You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.

    You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?

    A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.

    B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.

    C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.

    D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.


    正确答案：A
    解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.

    Incorrect answers:
    B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.

    C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.

    D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.

  • 第4题：

    You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

    • A、Configure a DNS suffix.
    • B、Configure a subnet mask.
    • C、Configure an LMHOSTS file.
    • D、Configure an Interface metric.
    • E、Configure at least one DNS address.

    正确答案:B,E

  • 第5题：

    You are the network administrator for Company.  Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers  to the network.   You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet.    You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72   You want to enable the Windows 2000 Professional computers to communicate outside their own subnet.   What should you do?（）

    • A、Install a DHCP server.
    • B、Install a WINS server. Configure each computer to use WINS.
    • C、Create an Lmhost file on each computer.
    • D、Create a Hosts file on each computer.

    正确答案:A

  • 第6题：

    As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort.  You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server.  What should you do to resolve this problem?（）

    • A、Run RBFG*EXE to create a Non-PXE-compliant startup disk.
    • B、Run RIPREP.*XE to create a non - PXE complaint startup disk.
    • C、Grant the ‘Everyone’ group NTFS Read permission for the RIS image.
    • D、Grant the Administrators group NTFS Read permission for the RIS image.

    正确答案:A

  • 第7题：

    You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers.  You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals:   An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%.  Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.  Which result or results do these actions produce?（　）

    • A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
    • B、Existing user environments will be maintained on the Windows 2000 Professional computers.
    • C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.
    • D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.

    正确答案:A,D

  • 第8题：

    You are the administrator of Company.com’s Windows 2000 Network.  Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer.   You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

    • A、Configure a HOSTS file.
    • B、Configure a LMHOSTS file.
    • C、Configure a WINS server database.
    • D、Configure a DHCP server address.
    • E、Configure at least one DNS address.

    正确答案:A,E

  • 第9题：

    You are the administrator of a Windows 2000 network.  You upgrade five computers in the sales department to Windows 2000 Professional. You then apply the Basicwk.inf security template to the upgraded computers. The remaining computers in the sales department are using Windows NT Workstation 4.0. When users log on to the Windows 2000 Professional computers they report that they are unable to run the company’s database application.  When the users log on to Windows NT Workstation 4.0 computers they are able to run the database application.  You want the users of Windows 2000 Professional computers to be able to run the database application.  What should you do? （）

    • A、Apply the Securews.inf security template to the computers.
    • B、Apply the Compatsws.inf security template to the computers.
    • C、Delete the Basicwk.inf security template file from the computers.
    • D、For each user account， grant Read permission to the database application and its associated files.
    • E、Use the System Policy Editor to configure a new security policy for the database application.

    正确答案:B

  • 第10题：

    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

    • A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
    • B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

    正确答案:A

  • 第11题：

    You are the network administrator for ExamSheet.net. You administer ExamSheet’s Windows 2000 network. You upgrade 10 computers in the Accounting department from Windows NT Workstation 4.0 to Windows 2000 Professional. All of the upgraded computers are configured to have the default security settings. For security purposes you want to ensure that these computers can only communicate with other Windows 2000 computers.  What should you do？（）

    • A、On each computer configure separate memory spaces for each financial and credit applications.
    • B、Apply Highly Secure security template to the local security policy of the computers in the Accounting department.
    • C、Apply Compatible security template to the local security policy of the computers in the Accounting department.
    • D、Add each user account to the Power Users group on that user’s computer.

    正确答案:B

  • 第12题：

    单选题
    You are the administrator of a Windows 2000 network.  The network has 100 Windows 2000 Professional computers. A graphics application was assigned to all the computers on the network by using a Group Policy object (GPO).  You deploy a service release for the graphics application to all of the Windows 2000 Professional computers on the network. The service release, in addition to other software that had been assigned, fails to install on only one of the computers.   What should you do?（）
    A

    Restart Windows Installer on the domain controller.

    B

    Restart Windows Installer on the computer that failed to install the service release.

    C

    Redeploy the service release by using an .mst file.

    D

    Redeploy the service release by using a .zap file.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

    You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

    What should you do?

    A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

    B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

    C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

    D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.


    正确答案：A
    解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

  • 第14题：

    You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.

    You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.

    You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.

    What should you do?

    A．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.

    B．Copy the Windows NT policy file to the 20 Windows NT Workstation computers.

    C．Create a Windows 2000 Group Policy that denies user access to My Network Places.

    D．Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.


    正确答案：C
    解析：Explanation: Windows NT 4.0 system polices affect computers running Windows NT 4.0. The Windows NT computers in this scenario are being used as Terminals for the Windows 2000 Server computer that is running Terminal Services. In effect the Windows NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server. This can be done by using a group policy.

    Incorrect answers:
    A: System policy templates only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

    B: Windows NT policies only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

    D: The NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server.

  • 第15题：

    You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers.  You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.  What should you do?（）

    • A、Configure the DHCP scope to add additional IP addresses.
    • B、Run Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.
    • C、Modify the startup sequence in the CMOS of the remaining computers.
    • D、Create computer accounts on the remaining computers in the active directory.

    正确答案:A

  • 第16题：

    You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers. You log on to the computer by using the local administrator account.  You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network.  What should you do?（）

    • A、Run Rbfg.exe before installing the standard applications. 
    • B、Run RIPrep.exe before installing the standard applications. 
    • C、Copy the all users profile to the default users profile.
    • D、Copy the local administrator account profile to the default users profile

    正确答案:D

  • 第17题：

    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）

    • A、The bindings.
    • B、A DNS address.
    • C、A Gateway address.
    • D、A WINS server address.
    • E、A DHCP server address.

    正确答案:C,D

  • 第18题：

    You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers.   According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network.   You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network.   What should you do？  （）

    • A、 On each domain controller， disable Server Message Block （SMB） signing and encryption of the secure channel traffic.
    • B、 Replace all Windows 98 computers with new Windows XP Professional computers.
    • C、 Install the Active Directory Client Extensions software on the Windows 98 computers.
    • D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.

    正确答案:B

  • 第19题：

    You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）

    • A、Ask a domain administrator to authorize the RIS server. 
    • B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.
    • C、Install RIS on the domain controller. Copy the RIS image to the domain controller.
    • D、Add a reservation for the RIS server to the DHCP server. 

    正确答案:A

  • 第20题：

    The network at Company Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000Professional computers. The Company network consists of five interconnected TCP/IP subnets. All of thecomputers use TCP/IP as the only network protocol.You are adding 15 Windows 2000 Professional computers to the network. You want to enable theWindows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.What should you do？ （）

    • A、Install a DHCP server. Configure each computer to use DHCP. 
    • B、Install a WINS server. Configure each computer to use WINS. 
    • C、Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and  NetBIOS name for each computer on the network. 
    • D、Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network. 

    正确答案:B

  • 第21题：

    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

    • A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
    • B、Use Windows 2000 Professional to configure drive C as a dynamic partition
    • C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
    • D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

    正确答案:D

  • 第22题：

    You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers.   According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network.   You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network.  What should you do？ （）

    • A、 On each domain controller, disable Server Message Block (SMB) signing and encryption of the secure channel traffic.  
    • B、 Replace all Windows 98 computers with new Windows XP Professional computers.  
    • C、 Install the Active Directory Client Extensions software on the Windows 98 computers. 
    • D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.

    正确答案:B

  • 第23题：

    多选题
    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）
    A

    The bindings.

    B

    A DNS address.

    C

    A Gateway address.

    D

    A WINS server address.

    E

    A DHCP server address.


    正确答案： C,D
    解析： 暂无解析

相关内容